Computational Structural Engineering (전산구조공학)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

P-version Crack Model for Computation of Stress Intensity Factor of Cracked Panels Subjected to Membrane Forces

인장력을 받는 균열판의 응력확대계수 산정을 위한 p-version균열모델

  • 윤영필 (목포전문대 토목공학과) ;
  • 우광성 (전남대학교 토목공학과) ;
  • 박병기 (전남대학교 토목공학과) ;
  • 신영식 (영남대학교 토목공학과)
  • Published : 1993.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The p-version crack model based on integrals of Legendre polynomial and virtual crack extension method is proposed with its potential for application to stress intensity factor computations in linear elastic fracture mechanics. The main advantage of this model is that the data preparation effort is minimal because only a small number of elements are used and high accuracy and the rapid convergence can be achieved in the vicinity of crack tip. There are two important findings from this study. Firstly, the limit value, the strain energy of the exact solution, can be estimated with successive three p-version approximations by ascertaining that the approximations enter the asymptotic range. Secondly, the rate of convergence of p-version model is almost twice that of h-version model on the basis of uniform or quasiuniform mesh refinement for the cracked panel problem subjected to tension.

적분형 르장드르 다항식과 가상균열확장법을 사용한 p-version균열모델이 선형 탄성파괴력학에서 응력확대계수를 산정할 수 있도록 제안되었다. 이 모델의 큰 장점은 소수의 요소를 사용하기 때문에 입력재료를 최소화 할 수 있고 균열선단 부근에서 높은 정확도와 빠른 수검율을 얻을 수 있다는 것이다. 이 연구를 통해 얻어진 두 가지 결론은 다음과 같다. 첫째, 변형에너지의 정해인 극한치가 수검구간에 있는 연속된 3개의 p-version 유한요소 결과로 부터 확정 할 수 있다는 것이다. 둘째, 인장력을 받는 균열판 해석에서 p-version의 수검율은 균등 또는 유사균등 요소분할에 근거를 둔 h-version모델에 비해 거의 2배 가량 빠름을 알 수 있다.

Keywords

References

  1. Phil. Trans. Royal Society of London v.A-221 The Phenomena of Rupture and Flaw in Solids A.A.Griffith
  2. American Society of Metals Fracture Dynamics, in Fracturing of Metals G.R.Irwin
  3. Proceedings of First Inter national Conference on Structureal Mechanics in Reactor Technology v.6 Survey and Evaluation of the Finite Element Method in Linear Fracture Mechanics Analysis R.H.Gallagher
  4. Int. J. Frac. Mech v.6 no.2 The Calculation of Stress Intensity Factors Using the Finite Element method with Cracked Elements E.Byskov
  5. Ph.D. Dissertaion, Georgia Institute of Technology A High-Order Finite Element for Two-dimensional Crack Problems R.H.Hardy
  6. Int. J. Num. Mech. Eng. v.10 A Degenerate Solid Element for linear Fracture Analysis of Plate Bending and General Shells R.S.Barsoum
  7. Int. J. solids Struct. v.9 On the Convergence of the Finite Element Method for Problems with Singularity P.Tong;T.H.H.Pian
  8. Computers & Structures v.42 Computation of stress intensety sactors for plate bending problem in fracture mechanics by hybrid mongrel finite element C.H.Kang;G. DE Saxce
  9. Int. J. Numer. Meth. Eng. v.10 Represntation of singularities with isoparametric finite elements S.E.Benzely
  10. Int. J. Numer. Meth. Eng. v.28 Stress intensity factors by enriched mixed finite elements P.R.Heyliger;R.D.Kriz
  11. Reprrt No. R-340 Technical Documentation and User's manual: COMET-X P.K.;Basu;M.P.Rossow;B.A.Szabo
  12. Doctoral Dissertation P-convergent Finite Element Approximation in Linear Elastic Fracture Mechanics A.K.Mehta
  13. Int. J. Numer. Meth. Eng. v.18 On the Rates of Convergence of the Finite Element Method I.Babuska;B.A.Szabo
  14. 전산구조공학 v.3 no.3 균열 쉘의 파괴역학해석을 위한 선진 유한요소기법 우광성
  15. 대한토목학회 v.12 no.4-1 계층적 축대칭요소에 의한 P-version 모델 우광성(외 2인)
  16. ASME J. Appl. Mech. v.35 A path-independent integral and the approximate analysis of strain concentration by notches and cracks J.R.Rice
  17. Int. J. Fracture v.10 no.4 A stiffness derivative finite element technique for determination of elastic crack tip stress intensity factors D.M.Parks
  18. Int. J. Num. Meth. Eng. v.9 no.1 On the method of virtual crack extensions T.K.Hellen
  19. 전산구조공학 v.5 no.3 P-version 유한요소법에 의한 피로균열해석 우광성;이채규
  20. The Stress Analysis of Cracks Handbook(Second Edition) H.T.ada;P.Paris;G.R.Irwin
  21. Compendium of Stress Intensity Factors D.P.Rooke;D.J.Cartwright