Textile Coloration and Finishing (한국염색가공학회지)
- Volume 5 Issue 3
- /
- Pages.194-205
- /
- 1993
- /
- 1229-0033(pISSN)
- /
- 2234-036X(eISSN)
A Study on the Bathochromic of Poly(Ethylene Terephthalate) Fabrics by Plasma Polymerization
Plasma polymerization에 의한 PET 직물의 심색화에 관한 연구
- Cho, Hwan (Department of Textile Engineering, College of Engineering, Yeung Nam University) ;
- Kim, Han-Ki (The R &D Lab. 2, Kabool Research Center) ;
- Jang, Byung-Yul (The R &D Lab. 2, Kabool Research Center) ;
- Lee, Kwang-Woo (Department of Clothing and Design, Sang Joo Sanup University) ;
- Cho, In-Sool (Department of Coloration, Yeung Nam Junior College of Tech.) ;
-
Heo, Man-Woo
(Department of Textile Engineering, Kyungpook Sanup University)
- 조환 (영남대학교 공과대학 섬유공학과) ;
- 김한기 (갑을기술연구소 제2연구실) ;
- 장병율 (갑을기술연구소 제2연구실) ;
- 이광우 (상주산업대학 의상디자인학과) ;
- 조인술 (영남공업전문대학 염색과) ;
-
허만우
(경북산업대학 섬유공학과)
- Published : 1993.09.01
Abstract
Plasma polymerization in prepared glow discharge was carried out to improve the bathochromic of dyed PET fabrics by using silicon containing vinyl monomer in plasma polymerization equipment which consists of a pair of electrodes was connected to the 13.56MHz RF generator. The optimum condition for the bathochromic effect was investigated on various plasma polymeriztion parameters. By plasma polymerization used silicon containing vinyl monomer, the bathochromic of dyed PET fabrics was very enhanced. The optimum conditions on this equipment were as follows ; electrode distance : 3cm, discharge output : 60W, gas pressure : 0.3 Torr, monomer flow rate : 30㎤/min. plasma polymerization time : 60sec. The apparent strength of plasma polymerized PET fabrics was increased about 40∼47% with decreasing about 3 of L value.
Keywords