Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Attrition Milling and Reaction-Sintering of the Oxide-Metal Mixed Powders: I. Milling Behavior as the Powder Characteristics

산화물과 금속 복합 분말의 Attrition Milling 및 반응소결: I. 분말의 특성에 따른 분쇄 거동

  • 황규홍 (경상대학교 무기재료공학과) ;
  • 박정환 (경상대학교 무기재료공학과) ;
  • 윤태경 (경상대학교 무기재료공학과)
  • Published : 1994.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The reaction-sintered alumina and zirconia-alumina ceramics having low firing shrinkage were prepared from the Al/Al2O3 or Al/ZrO2(Ca-PSZ) powder mixtures via the attrition milling. And in this milling process the effect of the characteristics of used powders was investigated. Attrition milling was much more effective in reducing the particle size of ceramic/metal mixed powders than ball milling. Powder mixtures of flake-type Al with coarse alumina was much more effectively comminuted by the attrition milling than the mixtures of globular-type Al with coarse alumina powders. And coarse alumina than fine alumina was much more beneficial in cutting and reducing the ductile Al particles. In the contrary to Al/Al2O3 powder mixtures, Al/ZrO2 powder mixtures was not effectively comminutd. But whether using the alumina ball media or attrition milled with Al2O3 powder rather than Al, the milling efficiency was much more increased.

Keywords

References

  1. J. European Ceramic Soc. v.5 Low-Shrinkage Reaction-bonded Alumina N. Claussen(et al)
  2. Alumina-Processing,Properties,and Applications E. Doerre(et al)
  3. Special Ceramics v.5 C.W Forrest;P. Kennedy;F.V. Shennan
  4. ibid The Silicon Nitride and Sialon Families of Structural Ceramics M.L. Torti
  5. 요업학회지 v.20 no.1 첨가된 알루미늄 분말의 산화가 알루미나의 소결에 미치는 영향;Ⅰ.공기중.1350-1550℃에서 박정현;안주삼;김해두
  6. 요업학회지 v.21 no.3 첨가된 알루미늄 분말의 산화가 알루미나의 소결에 미치는 영향;Ⅱ.공기중,1600-1800℃에서 박정현;전병세
  7. Ceram Eng Sci.Proc v.11 no.7-8 Tailoring of Reaction-bonded Al₂O₃(RBAO) Ceramics N.Claussen(et al)
  8. Ceram. Eng. Sci. Proc. v.11 no.7-8 Preparation and Characterization of Reaction-bonded Aluminum Oxide(RBAO)Matrix SiC Particulate Filler Composites A.G.Gesing(et al)
  9. J. Am. Ceram. Soc. v.74 no.10 Fabrication and Properties of Low-shrinkage Reaction-bonded Mullite S. Wu(et al)
  10. 요업학회지 v.29 no.6 저수축 반응소결 알루미나 세라믹스의 제조 박정현;이현권;정경원;염강섭
  11. Introduction to the Principle of Ceramic Processing J.S. Reed
  12. Ceram Eng Sci. Proc v.11 no.7-8 Tailoring of Reaction-bonded Al₂O₃(RBAO) Ceramics N. Claussen(et al)