Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

Characteristics of Adhesive bonded Joints of Steels for Automobile(I)

자동차용 강판의 접착특성 - 접착부위 접합 강도와 영향인자 -

  • 윤병현 (산업과학기술연구소 철강제품연구본부 설비공정팀) ;
  • 권영각 (산업과학기술연구소 철강제품연구본부 설비공정팀)
  • Published : 1995.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The characteristics of adhesive bonded joint of steels for automobile were investigated. Shear and tear strength were tested and analyzed for the joints of cold rolled steel sheets bonded with three kinds of epoxy and urethane based adhesive. The results showed that the tensile shear strength and the tear strength of adhesive joint were affected by the shape of adhesive joint such as the length and width of adhesive joint. The thickness of adhesive layer was very important factor affecting the bonding strength. The shear strength increased with decrease of the thickness of adhesive layer, while the tear strength decreased as the thickness of adhesive layer decreased. In comparison with the strength of spot welded joint, the shear strength of adhesive Joint was higher than that of spot welded joint, but the tear strength of adhesive Joint was lower than that of spot welded joint.

Keywords

References

  1. Inter. Pol. Sci. & Tech. v.14 no.6 K.Nakao
  2. Inter. Pol. Sci. & Tech. v.14 no.6 N.Tanoi
  3. 日本溶接學會誌 v.60 no.3 Masashi IDE
  4. Inter. Pol. Sci. & Tech. v.14 no.6 M.Mitoh
  5. Adhesives Handbook(3rd Ed.) J.Shields
  6. Handbook of Adhesives(2nd Ed.) I.Skeist
  7. J. Appl. Mech. v.2 M.Goland;E.Reissner
  8. J. Adhesion v.11 E.Sancaktar;P.O.Lawry
  9. Trans. ASME 78 R.L.Lubkin;E.Reissner
  10. J. Strain Anal. v.9 R.D.Adams;N.A.Peppiatt