Abstract

In this study, a FE model tuning method using experimental modal data was suggested after examining all the published conventional methods. The idea of this method is introducing scale factors to maintain both the structural connectivity and the consistency in the corrected stiffness matrix which makes it always possible to interpret the stiffness elements with the corresponding physical configuration of the targeting structure. The scale factors are determined to minimize the objective function of eigen-properties. The proposed method was tested to determine the joint stiffness of a T shaped beam. The test results were also compared with the tuned stiffness obtained from a probed commercial package (SYSTUNE) and found that this method is very accurate and compatible.

Keywords

• Finite Element Method;
• Modal Analysis;
• Vibration;
• Tuning;
• FE Model Improvement;
• Joint Stiffness

• 유한요소법;
• 모드해석;
• 진동;
• 튜닝;
• 유한요소 모델 개선;
• 연결부 강성;