Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

Rotation of Orthotropy Axes with Work Hardening of Anisotropic Sheet Metals

이방성 금속판재의 가공경화에 따른 직교대칭축의 회전

  • Published : 1996.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Based upon experimental observations the authors have shown in the previous studies that the orientations of orthotropy axes of anisotropic sheet metals are subjected to change during tensile loading at angles to the rolling direction. To predict the rotations of orthotropy axes under general plane stress conditions, a simple phenomenological model is proposed which accounts for the effect of work hardening. Predictions from the model are compared against the experiments for 0%, 3%, and 6% of 1st tensile prestrains in the rolling direction and 2nd tensile prestrains at 30$^{\circ}$, 45$^{\circ}$ and 60$^{\circ}$ to the 1st prestrains axis. The model showed good agreements with the experimental observations. A new interpretation of the experimental data is suggested regarding the rotations of orthotropy axes.

Keywords

References

  1. The Mathematical Theory of Plasticity Hill, R.
  2. Int. J. Mech. Sci. v.19 Yield characterization of metals with transversely isotropic plastic properties Bassani, J. L.
  3. Int. J. Mech. Sci. v.19 A thoery of plastic anisotropy based an a yield function of fourth order (plane stress state)-I Gotoh, M.
  4. Math. Proc. Camb. Phil. Soc. v.85 Theoretical plasticity of textured aggregates Hill. R.
  5. J. Mech. Phys. Solids v.38 Constitutive modelling of orthotropic plasticity in sheet metals Hill, R.
  6. Int. J. Mech. Sci. v.35 A user-friendly theory of orthotropic plasticity in sheet metals Hill, R.
  7. Phil. Mat. 7th series On the correlation of the directional properties of rolled sheet Bourne, L.;Hill, R.
  8. Int. J. Mech. Sci. v.8 Plastic flow in stabilized sheet steel Bramley, A. N.;Mellor, P. B.
  9. Int. J. Mech. Sci. v.10 Plastic anisotropy of titanium and zinc sheet-I(Macroscopic approach) Bramley, A. N.;Mellor, P. B.
  10. J. Basic Engineering, Trans. ASME, Paper No. 71-METY Anisotropy in plastic torsion Bailey, J. A.;Haas, S. L.;Nawab, K. C.
  11. J. Eng. Mat. and Tech., Trans. ASME v.105 An evaluation of anisotropic effective stress-strain criteria for the biaxial yield and flow of 2024 aluminum tubes Stout, M. G.;Hecker, S. S.;Bourcier, R.
  12. J. Eng. Mat. and Tech., Trans. ASME v.108 The anisortropic deformation of yield surfaces Eisenberg, M. A.;Yen, C. F.
  13. Int. J. Plasticity v.5 The effect of plastic spin on anistoropic material behavior Dafalias, Y. F.;Rashid, M. M.
  14. 대한기계학회논문집 v.15 전단변형에 의한 직교이방성의 변화 김권희
  15. J. Mech. Phys. Solids v.40 Evolution of anisotropy during twisting of cold drawn tubes Kim, K. H.
  16. 박사학위논문, 서울대학교 이방성 금속판재의 가공경화 특성에 관한 연구 인정제
  17. 추계학술대회 및 심포지움 논문집 이방성 금속판재의 가공경화 특성에 관한 연구 김권희;인정제;김동원
  18. 김권희와의 개인 서신 Hill, R.
  19. 김권희와의 개인 서신 Hill, R.
  20. 한국소성가공학회지 v.3 no.3 평면응력하에서의 직교이방성 대칭축의 회전 인정제;김권희