A Study on Anisotropic Characteristics of Sedimentary Rocks(Taegu area)

퇴적암의 비등방 특성에 관한 연구(대구지역)

  • 김영수 (경북대학교 공과대학 토목공학과) ;
  • 허노영 (경북대학교 대학원 토목공학과 박사수료, 경동정보대학 토목과) ;
  • 서인식
  • Published : 1998.08.01

Abstract

The ground of Taegu area consists mainly of shales with elastic sedimentary rocks. These shales have a nonhomogeneous and anisotropic characteristics. So their physical and mechanical properties are very different due to the angles($\beta$ value) of bedding planes of sedimentary rock. In this study, the physical and mechanical characteristics of shales in Taegu area are studied by performing all kinds of rock test. According to results of test, apparent specific gravity of shale decreases as the $\beta$ value increases. On the contrary, porosity and absorption increase. Elastic wave velocity shorts the highest value at the $90^{\circ}$. And Young's modulus shows the maximum value at the $30^{\circ}$. The uniaxial strength, triaxial strength, cohesion and angle of friction show the minimum value at the $60^{\circ}$respectively.

대구지역의 제반은 주로 쇄설성 퇴적암인 혈암으로 구성되어 있다. 이 혈암은 비균질, 비등방성 암석으로 각종 물성치와 역학적 특성이 층리면의 각도($\beta$값)에 따라 매우 다르다. 본 연구에서는 대구지역의 혈암에 대하여 각종 물성, 역학특성 시험을 실시하여 다음과 같은 결과를 얻었다. 비중값은 $\beta$값이 커질수록 감소하지만 간극률, 흡수율은 이와 반대로 증가 하였다. 탄성파 속도는 ($\beta$값이 $90^{\circ}$ 일때가 가장 끈 간을 보이고 탄성계수는$\beta$같이 $30^{\circ}$에서 최대치를 나타내었다. 그리고 강도혹성과 강도정수인 점착력과 마찰각은 모두 $\beta$값이 $60^{\circ}$에서 가장 작은 값을 나타내었다.

Keywords

References

  1. 불연속성 암반의 지질공학 송무영
  2. 암석, 암반의 조사와 시험 윤지선
  3. X선 회절의 기초 한봉희
  4. 퇴적암의 공학적 특성 연구(대구, 경북지역을 중심으로) 여산장학문화재단
  5. Underground Excavations in Rock Hoek,E.;Brown,E.T.
  6. Fundamentals of Rock Mechanics Jaeger,J.C.;Cook,N.G.W.Cook
  7. Comprehensive Rock Engineering v.1-12 Mechani-cal Behavior of Anisotropic Rocks Marek, A. Kwasniewski
  8. Introduction to Rock Mechanics Richard, E. Goodman
  9. Com Rock Eng. v.1-13 Strength and Modulus Responses of Anisotropic Rock Ramamurthy,T.
  10. Fifth Australia-New Zealand Con. on Geomechanics Sydney A Strength Criterion for Anisotropic Rocks Ramamurthy,T.;Rao,G.V.;Singh,J.