Abstract

The objective of this study is to propose a new approach for modelling of burr formation process during orthogonal cutting when the tool exits the workpiece. This approach is based on the rigid-plastic finite element method combined with the ductile fracture criterion and the element kill method. This approach is applied to orthogonal cutting process to predict the fracture location and the fracture angle as well as the cutting force. To validate this approach, orthogonal cutting tests inside SEM(scanning electron microscope) at very low speed are carried out using A16061-T6 to observe the behavior of the material during the chip and the burr formation. The results of the experiment are compared with those of the finite element simulation.

Keywords

• Burr Formation;
• Rigid-Plastic Finite Element Method;
• Ductile Fracture Criterion;
• Element Kill Method

• 버 형성;
• 강소성 유한요소법;
• 연성파단기준;
• 요소제거기법;