Mechanical Properties and Microstructures of Self-toughened Silicon Nitride Cermic Prepared by Microstructural Control

미세구조 제어에 의해 제조한 자체 강인화 질화규소 세라믹의 기계적 성질과 미세조직

  • 김완중 (인하대학교 무기재료공학과) ;
  • 이영규 (인하대학교 무기재료공학과) ;
  • 조원승 (인하대학교 무기재료공학) ;
  • 최상욱 (인하대학교 무기재료공학과)
  • Published : 1999.04.01

Abstract

The self-toughened Si3N4 ceramics where needle-like coarse ${\beta}$-Si3N4 grains were dispersed within fine-grain-ed matrix were prepared via hot-prssing at 1730$^{\circ}C$ for 2 h using 5 vol% ${\beta}$-Si3N4 whiskers as a seed. In this study the microstructures and mechanical properties of self-toughened Si3N4 ceramics were investigated. The flexural strength of self-toughened Si3N4 ceramics was increased from 600-800 MPa of the Si3N4 monolith to 830-1025 MPa. The KIC was also increased from 4.0-5.0MPa$.$m1/2 of the Si3N4 monolith to 5.8-6.5MPa$.$m1/2$.$The needle-like coarse Si3N4 grains in self-toughened ceramics were considered to induce various toughening mechanisms including the crack deflection pull-out and bridging and to contribute to KIC improvement. In ad-dition to toughening mechanisms the KIC improvement was considered to be partially indebted also to the orien-tation of large ${\beta}$-Si3N4 grains and to the promoting effect of ${\beta}$-Si3N4 whiskers on the ${\alpha}$ to ${\beta}$ transtion.

Keywords

References

  1. J. Am. Ceram. Soc. v.76 no.9 Fundamental Research in Structural Ceramics for Service Near 2000℃ R. Raj
  2. J. Am. Ceram. Soc. v.79 no.3 Silicon Nitride Based Ceramic Nanocomposites X. Pan;J. Mayer;M. Ruhle;K. Niihara
  3. J. Am. Ceram. Soc. v.72 no.4 Silicon Carbide Nanofilament-Reinforced Silicon Nitride or Silicon Carbide Matrix Composites H. Kodama;H. Sakamoto;T. Miyoshi
  4. J. Ceram. Soc. Jpn. v.100 no.7 Effect of Kinds of Sintering Aids of Rare Earth Oxides on Si₃N₄Grain size and Fracture Toughness of SiC Whisker/Si₃N₄Composite Ceramics W.S. Cho;K. Hayashi
  5. J. Jpn. Inst. Met. v.56 no.9 Effect of Uni-directional Orientation of SiC Whiskers on Mechanical Properties of SiC Whisker/Si₃N₄Composite Ceramics W.S. Cho;K. Hayashi
  6. J. Ceram. Soc. Jpn. v.100 no.11 Anisotropy of Room Temperature Mechanical Properties of Hot-Pressed SiC Whisker/Si₃N₄ Composite Ceramics W.S. Cho;K. Hayachi
  7. J. Ceram. Soc. Jpn. v.103 no.4 Dependence of Fracture Toughness Anisotropy of Si₃N₄ and SiC Whisker/Si₃N₄ Hot-Pressed Compact on Fracture Toughness Evaluating Method W.S. Cho;K. Hayashi
  8. J. Jpn Soc. Powder & Powder Metalurgy v.45 no.4 Room Temperature Mechanical Proeprties of SiC Whisker/Si₃N₄Ceramics Composites W.S. Cho;K. Hayasi
  9. SiC 휘스커 강화 질화규소 복합재료의 기계적 성질에 미치는 코팅 SiC 휘스커의 영향 배인경;장병국;조원승;최상욱
  10. J. Am. Ceram. Soc. v.76 no.7 Effect of Grain Growth of β-Silicon Nitride on Strength, Weibull Modulus and Fracture Toughness N. Hirosaki;Y. Akimune
  11. J. Am. Ceram. Soc. v.75 no.7 R-Curve Behavior and Strength for In-Situ Reinforced Silicon Nitride with Different Microstructures C.W. Ii;D.J. Lee;S.C. Lui
  12. J. Am. Ceram. Soc. v.75 no.1 Microstructural Development During Gas-Pressure Sintering of α-Silicon Nitride M. Mitomo
  13. Acta Metall. v.31 no.4 Crack Deflection Process-Ⅰ. Theory K. T. Faber;A.G. Evans
  14. J. Am. Ceram. Soc. v.74 no.9 Matrix-Grain-Bridging Contributions to the Toughness of Whiskers-Reinforced Ceramics P.F. Becher;E.R. Fuller;P. Angelini
  15. Acta Metall. v.36 no.3 Effects of Pull-out on the Mechanical Properties of Ceramic-Matrix Composites M.D. Thouless;A.G. Evans
  16. Fracture Mechanics Applied to Brittle Materials Fracture from Controlled Surface Flaws J.J. Petrovic;M.G. Mendiratta
  17. Am. Ceram. Soc. Bull. v.56 no.9 Determination of Phase Content of Si₃N₄by X-ray Diffraction Analysis C.P. Gazzara;D.R. Messier
  18. J. Ceram. Soc. Jpn. v.102 no.9 TEM Analysis of Core-Rim Structure in β-Silicon Nitride Ceramics N. Hirosaki;M. Tanimura;Y. Akimune;M. Mimoto
  19. Nonoxide Technical and Engineering Ceramics Microstructural Development, Microstructural Characterization and Relation to Mechanical Properties of Dense Silicon Nitride G. Wotting;B. Kanka;G. Ziegler;S. Hampshire(Ed.)