Abstract
This paper describes the rmtion characteristics of a particle in GIS under AC voltage. To measure the motion characteristics of the particle, a model gas chamber and parallel plain electrodes were designed and manufactured lift-off voltages of wire and spherical particles on the electrode were calculated and rreasured, and electric charge was calculated. By using a high speed carrera, the rmtion characteristics of various particles with aw}ied voltages, such as motion pattern, lift-off time, lift-off height, were analyzed 1be lift-off voltages were greatly affected by diarreters of wire and spherical particles. At voltage around lift-off voltage, the stand-up particle in vertical state rmved up and down between electrodes and the height of the lift-off particle was low. At voltage around breakdown voltage, the particle repeated vertical rotation a few times while they were being lifted off, and then, they were floating between the electrodes.trodes.
본 논문에서는 교류전압 인가시 모의 GIS내에 존재하는 금속이물의 거동현상에 대해 연구하였다. 평행평판 전극을 내장한 가스챔버를 설계·제작하고, 전국내 선형 및 구형의 금속이물에 대해 부상전압을 계산 및 측정하였다. 또한 각각의 금속이물에 대전되는 전하량을 계산하였다. 고속카메라를 이용하여 금속이물의 종류 및 인가전압에 따른 거동양상과 부상시간, 부상높이 등의 거동특성을 분석하였다. 전계인가시 금속이물의 대전 전하량은 금속이물의 크기에 따라 증가하며, 부상전압은 서형 및 구형 금속이물의 직경에 큰 양형을 받는 것으로 나타났다. 금속이물의 부상이후 부상전압 부근의 전압에서의 선형 금속이물은 후 전극과 거의 수직인 상태로 상하 왕복운동을 하며, 거의 수직상태로 움직이는 거동 형태를 나타내었다. 절연파괴전압에 가까운 전압에서는 금속이물은 부상 중에 수회 수직회전을 반복하며, 장시간 부유하였다.