Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Densification Behavior of Ti-6Al-4V Power Compacts by Hot Isostatic Pressing

열간 등가압 소결에 의한 Ti-6Al-4V 분말의 치밀화 거동

  • Published : 2000.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Densification behavior of titanium alloy powder was investigated under hot isostatic pressing at various pressures and temperatures. Uniaxial creep responses of a dense specimen were also obtained at high temperatures. The densification model of Abouaf and co-workers was implemented into a Finite element program (ABAQUS) to compare with experimental data for titanium alloy powder. The agreements between finite element calculations and experimental data for deformation and densification of titanium alloy powder were good during hot isostatic pressing.

Keywords

References

  1. Blenkinsop, P. A., Evans, W. J. and Flower, H. M., 1996, Titanium '95 Science and Technology : Proceedings of the Eigthth World Conference on Titanium, The Institute of Materials, London
  2. Froes, F. H. and Eylon, D., 1990, 'Powder Metallurgy of Titanium Alloys,' Interantional Materials Reviews, Vol. 35, No. 3, pp.162-182
  3. Powder Matallurgy, Metals Handbook, 9th ed., Vol. 7, U.S.A., 1984
  4. Besson, J. and Abouaf, M., 1991, 'Behavior of Cylindrical HIP Containers,' Int. J. Solids Structures, Vol. 28, No. 6, pp. 691-702 https://doi.org/10.1016/0020-7683(91)90150-E
  5. Bouvard, D. and Lafer, M., 1989, 'Rheological Characterization of Metal Power at High Temperature,' Advances in powder Metallurty, Vol. 1, pp. 491-503
  6. Abondance, D., Dellis, Ch., Baccino, R., Bernier, F., Monicault, J. M., Guichard, D. and Stutz, P., 1996, 'Numerical Modeling of Near-Net-Shape HIPing of Ti-6AI-4V Powder,' Titanum '95 Science and Technology, The Institute of Materials, London, PP. 2634-2640
  7. Kim, K. T. and Jeon, Y. C., 1998, 'Densification Behavior of 316L Strainless Steel Powder under High Temperature,' Mat. Sci. Eng. A245, pp. 64-71 https://doi.org/10.1016/S0921-5093(97)00696-5
  8. Jeon, Y. C. and Kim, K. T., 1999, 'Near-Net-Shape Forming of 316L Stainless Steel Powder under Hot Isostatic Pressing,' Mech. Sci. Vol. 41, pp. 815-830 https://doi.org/10.1016/S0020-7403(98)00053-8
  9. Abouaf, M., Chenot, J. L., Raisson, G. and Bauduin, P., 1988, 'Finite Element Simulation of Hot Isostatic Pressing of Metal Powder,' Int. J. Num. Meth. Engng., Vol. 25, pp. 191-212 https://doi.org/10.1002/nme.1620250116
  10. Kuhn, L. T. and McMeeking, R. M., 1992, 'Power-Law Creep of Powder Bonded by Isolated Contacts,' Int. J. Mech. Sci., Vol. 34, No. 7, pp. 563-573 https://doi.org/10.1016/0020-7403(92)90031-B
  11. Sofronis, P. and McMeeking, R. M., 1992, 'Creep of Power-Law Material Containing Spherical Voids,' J. Appl. Mech., Vol. 59, pp. s88-s95
  12. Abondance, D., Baccino, R., Bernier, F., Moret, F. De Monicault, J. M., Guichard, D., Stutz, P. and Bouvard, D., 1994, 'Numerical Modelling of Near-Powder Metallurgy,' Proceeding of Powder Metallurgy, pp. 797-800
  13. Kim, J. H., Han, D. B. and Kim, K. T., 1996, 'High Temperature Creep Behavior of $Cr_3C_2$ Ceramic Composite,' Mat. Sci. Eng. A, A212, pp. 87-93 https://doi.org/10.1016/0921-5093(96)10167-2
  14. Besson, J. and Evans, A. G., 1992, 'The Effect of Reinforcements on the Densification of a Metal Powder,' Acta metall. Mater., Vol. 40, No. 9, pp. 2247-2255 https://doi.org/10.1016/0956-7151(92)90143-3
  15. Wilkinson, D. S. and Ashby, M. F., 1975, 'Pressure Sintering by Power Law Creep,' Acta metall, Vol. 23, No. 11, pp. 1277-1285 https://doi.org/10.1016/0001-6160(75)90136-4
  16. Canel, J. and Bouvard, D., 1996, 'Constitutive Modeling of Metal Powder during Hot Isostatic Pressing : Comparison of Two Classical Models,' Advances in Powder Metallurgy and Particulate Materials, Vol. 2, Part 7, PP. 47-55
  17. Sanchez, L., Ouedraogo, E., Stutz, P. and Dellis, C., 1997, 'Numerical Simulation of Metal Powder Forming by Hot Isostatic Pressing,' International Workshop on Modelling of Metal Powder Forming Precesses, pp. 295-304
  18. ABAQUS User's I, II and III Manual, Hibbit, Karisson and Sorensen
  19. Bouaziz, O., Dellis, C. and Stutz, P., 1997, 'Creation of a Material Data File for Modeling HIPing of an Austenitic Stainless Steel,' International Workshop on Modeling of Metal Power Forming Predesses, pp. 67-75
  20. Boyer, R., Welsch, G. and Collings, E. W., 1994, Materials Properties Handbook : Titanium Alloys
  21. Kim, K. T. and Lee, H. T., 1998, 'Effect of Friction between Powder and a Mandrel on Densification of Iron Powder during Cold Isostatic Pressing,' Int. J. Mech. Sci., Vol. 40, No. 6, pp. 507-519 https://doi.org/10.1016/S0020-7403(97)00063-5
  22. Xu, J. and McMeeking, R. M., 1992, 'An Analysis of the Can Effect in an Isostatic Pressing of Copper Powder,' Int. J. Mech. Sci., Vol. 34, No. 2, pp. 167-174 https://doi.org/10.1016/0020-7403(92)90081-Q