참고문헌
- Kaczmar, J., 1989, 'Effect of Production Engineering Parameters on Structure and Properties of Cu-W Composite Powders,' Powder Metall., Vol. 32, No. 3. pp. 171-175
- Johnson, J. L. and German, R. M., 1993, 'Phase Equilibria Effects on the Enhanced Liquid Phase Sintering of Tungsten-Copper,' Metall. Trans. A, Vol. 24A, pp. 2369-2377
- Bouvard, D., 1993, 'Modelling the Densification of Powder Composites by Power Law Creep,' Acta Metall. Mater., Vol. 41, No. 5, pp. 1413-1420 https://doi.org/10.1016/0956-7151(93)90250-V
- Storakers, B., Fleck, N. A. and McMeeking, R. M., 1999, 'The Visco-plastic Compaction of Composite Powders,' J. Mech. Phys. Solids, Vol. 47, pp. 785-815 https://doi.org/10.1016/S0022-5096(98)00076-3
- Kim, K. T., Cho, J. H. and Kim, J. S., 1999, 'Cold Compaction of Composite Powders,' submitted
- Arzt, E., 1982, 'The Influence of an Increasing Particle Coordination on the Densification of Spherical Powders,' Acta Metall., Vol. 30, pp. 1883-1890
- Yamaguchi, K., Takakura, N. and Imatani, S., 1997, 'Compaction and Sintering Characteristics of Compostie Metal Powders,' J. Mater. Process. Solids, Vol. 63, pp. 364-369 https://doi.org/10.1016/S0924-0136(96)02648-9
- Delie, F., Bouvard, D., 1998, 'Effect of Inclusion Morphology on the Densification of Powder Composites,' Acta. Mater., Vol. 46, No. 11, pp. 3905-3913 https://doi.org/10.1016/S1359-6454(98)00060-3
- Abouaf, M., Chenot, J. L., Raisson, G. and Bauduin, P., 1988, 'Finite Element Simulation of Hot Isostatic Pressing of Metal Powder,' Int. J. Num. Meth. Engng., Vol. 25, pp. 191-212 https://doi.org/10.1002/nme.1620250116
- Kuhn, L. T. and McMeeking, R. M., 1992, 'Power-Law Creep of Powder Bonded by Isolated Contacts,' Int. J. Mech. Sci., Vol. 34, No. 7, pp. 563-573 https://doi.org/10.1016/0020-7403(92)90031-B
- Sofronis, P. and McMeeking, R. M., 1992, 'Creep of Power-Law Material Containing Spherical Voids,' J. Appl. Mech., Vol. 59, pp. s88~s95
-
Kim, J. H., Han, D. B. and Kim, K. T, 1996, 'High Temperature Creep Behavior of
$Cr_3C_2$ Ceramic Composite,' Mat. Sci. Eng. A, Vol. A212, pp.87~93 - ABAQUS User's I, II and III Manual, Hibbitt, Karlsson and Sorensen, Pawtucket, U.S.A., 1997
- Helle, A. S., Easterling, K. E. and Ashby, M. E, 1985, 'Hot-Isostatic Pressing Diagrams: New Developments,' Acta Metall., Vol. 33, pp.2163~2174
- Nohara, A., Nakagawa, T., Soh, T. and Shinke, T., 1988, 'Numerical Simulation of the Densification Behavior of Metal Powder During Hot Isostatic Pressing,' Int. J. Numer. Meth., Vol. 25, pp. 213-225
- Besson, J. and Evans, A. G., 1992, 'The Effect of Reinforcements on the Densification of a Metal Powder,' Acta Metall. Mater., Vol. 40, No. 9, pp. 2247-2255
- Bouaziz, O., Dellis, C. and Stutz, P., 1996, 'Creation of a Material Data File for Modeling HIPing of an Austenitic Stainless Steel,' Proc. of lnt'l Workshop on Modeling of Metal Powder Forming Processes, Grenoble, France, pp. 67-75
- Fleck, N. A., Kuhn, L. T. and McMeeking, R. M., 1992, 'Yielding of Metal Powder Bonded by Isolated Contacts,' J. Mech. Phys. Solids, Vol. 40, No. 5, pp. 1139-1162 https://doi.org/10.1016/0022-5096(92)90064-9
- Kobayashi, S. and Oh, S. I., 1989, Metal Forming and the Finite Element Method, Oxford University Press
- Song, M. C, Kim, H. G. and Kim, K. T., 1996, 'Creep Densification of Copper Powder Compact,' Int. J. Mech. Sci., Vol. 38, No. 11, pp. 1197-1208 https://doi.org/10.1016/0020-7403(96)00011-2
- Kim, K. T. and Jeon, Y. C, 1998, 'Densification Behavior and Grain Growth of Tool Steel Powder under High Temperature,' Acta Metall. Mater., Vol. 46, No. 16, pp. 5745-5754 https://doi.org/10.1016/S1359-6454(98)00261-4