Design of a Surface-mounted Chip Dielectric Ceramic Antenna for PCS Phone

PCS용 표면실장형 칩 유전체 세라믹 안테나 설계

  • Published : 2000.01.01

Abstract

In this paper, cellularphone antenna was designed to be capable of being mounted on the circuit-board with co-planar feeding method. The designed antenna is fabricated by the following procedure : make the multi-layered dielectric ceramic($\varepsilon_{\tau}$=23) hexahedron($7.5mm\times4.5mm\times0.4mm$) and then produce λ/4 monopole radiation element with helical structure on the surface of the hexahedron. The results are as followings : Returnloss 27.36 dB, -10 dB bandwidth 76 MHz(3.97 %), H-plane average gain -9.43 dBd.

본 논문에서는 휴대전화 단말기(핸드폰) 안테나를 co-planar 급전 구조의 회로기판상에 표면장착 가능한 칩형태로 설계 하였다. 설계된 안테나는 유전체 세락믹 ($\varepsilon_{\tau}$=23)을 적층하여 직육면체 형태($7.5mm\times4.5mm\times0.4mm$)로 만들고 그 표면에 $\lambda$/4 파장 모노폴 방사소자를 헬리컬 구조로 형성시켜 제작되었다. 제특성 측정 결과 반사 손실 27.36dB,-10dB 대역폭 76MHz(3.97%), H면 평균이득-9.43dBd로 일반적인 모노폴 안테나 방사 특성을 나타내었다.

Keywords

References

  1. Antenna Theory(2nd.) Constantine A. Balanis
  2. Helical and Spiral Antennas Hisamatsu Nakano
  3. ANTENNAS(KOREAN STUDENT EDITION) John D. Kraus