한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

인공관절과 공학기술

Joint Prostheses and Engineering Technology

  • 최귀원 (한국과학기술연구원 의과학연구센터)
  • 발행 : 2000.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. Charnley, J., 'Total hip replacement by low-friction arthorplasty,' Clin. Orthop. Rel. Res., Vol. 72, pp. 7 -21, 1972
  2. Carlsson, A., and Gentz, C-F., 'Mechanial loosening of the femoral head prosthesis in the Charnley total hip arthroplasty,' Clin. Orthop., Vol. 147, pp. 262 - 270, 1980
  3. Harris, W., McCarthy, J., and O'Neill, D., 'Femoral component loosening using contemporary techniques of femoral cement fixation,' J. Bone Joint Surg., Vol. 64, pp. 1063 - 1067, 1982
  4. Webber, B., 'Pressurized cement fixation in total hip arthroplasy,' Clin. Orthop., Vol. 232, pp. 87 - 95, 1988
  5. Greenwald, A., and O'Connor, J., 'The transmission of load through the hip joint,' J Biomechanics, Vol. 4, pp. 507 - 513, 1971 https://doi.org/10.1016/0021-9290(71)90041-8
  6. Allan, C, Jasty, M., and Harrigan, T., 'A comparison of the joint reaction forces measured with an instrumented prosthesis and calculated from gait analysis,' ORS Trans., Vol. 13, p. 322, 1989
  7. Williams, D., and Meachim, G., 'A combined metallurgical and histological study of tissse-prosthesis interactions in orthopedic patients,' J Biomed. Mater. Res., Vol. 8, pp. 1 - 9, 1974
  8. Agins, H., Alcock, N., and Bansal, M., 'Metallic wear in failed tatinium total hip replacements: a histological and quantitative analysis,' J Bone Joint Surg (A)., Vol. 70, pp. 347 - 356, 1988
  9. Wroblewski, B., 'Fractured stem in total hip replacement. A clinical review of 120 cases,' Acta Orthop. Scand., Vol. 53, pp. 279 - 284, 1982
  10. Brauer, G., Steinberger, D., and Stansbury, J., 'Dependence of curing time, peak temperature and mechanical properties on the composition of bone cement,' J Biomed. Mater. Res., Vol. 20, pp. 839 -852, 1986 https://doi.org/10.1002/jbm.820200614
  11. Frost, H., 'The regional acceleratory phenomenon,' Henry Ford Hosp. Med. J., Vol. 31, pp. 3 - 9, 1983
  12. Eyerer, P., and Ke, Y, 'Property changes of UHMW polyethylene hip cup endoprostheses during implantation,' J Biomed. Mater. Res., Vol. 18, pp. 1137-1151,1984 https://doi.org/10.1002/jbm.820180915
  13. Haddad, R., Cook, S., and Brinker, M., 'A comparison of three varieties of noncemented porous-coated hip replacement,' J Bone Joint Surg. (B), Vol. 72, pp. 2 - 8, 1990
  14. Long, M., and Rack, H., 'Riview: Titanium alloys in total joint replacement - a materials science perspective,' Biomaterials, Vol. 19, pp. 1621 - 1639, 1998 https://doi.org/10.1016/S0142-9612(97)00146-4
  15. Hall, R., and Unsworth, A., 'Riview: Friction in hip prostheses,' Biomaterials, Vol. 18, pp. 1017 -1026, 1997 https://doi.org/10.1016/S0142-9612(97)00034-3