Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Heat Transfer Characteristics in Impinging Air Jet with Hybrid Rod

하이브리드 로드를 갖는 충돌공기제트의 열전달특성에 관한 연구

  • Published : 2000.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The heat transfer characteristics for air jet vertically impinging on a flat plate which had a set of hybrid rod were investigated experimentally. The rod had a cross section made with a half of circular cross section and that of rectangular and was installed in front of the plate. The heating surface was given constant heat flux value of 1020 W/$m^2^{\circ]C$ and the problem parameters investigated were jet Reynolds number, nozzle-to-plate spacing and the rod size. The local and local average Nusselt number characteristics were found to be dependent on the rod size because the flow was disturbed by installing the rod. Higher convective heat transfer rate occurred in the whole plate as well as in the stagnation region.

Keywords

References

  1. J. of Heat Transfer v.88 Heat Transfer Characteristics of Impinging Two-Dimensional Air Jets Robert Gardon;J. Cahit Akfirat
  2. Int. J. Heat and Mass Transfer v.8 The Role of Turbulence in Determining the Heat Transfer Characteristics of Impinging Jets Robert Gardon;J. C. Akfirat
  3. 10th Symposium on Turb-ulence Shear Flows v.1 Velocity and Turbulence Characteristics of a Semi-Confined Orthogonally Impinging Slot Jet A. S. Ashforth-frost;K. Jambunathan;C. F. Whitney
  4. Transport Phenomena at the Stagnation Region of a Two Dimensional Impinging Jet. v.49 Yokobori, S.;Kasagi, N.;Hirata, M.
  5. Region of a Two Dimensional Impinging a Jet v.49 Acoustically Induced Enhancement of Widening and Fluctuation Intensity in a Two-Dimensional Impinging Jet F. O. Thomas;V. W.Goldschmit
  6. Int. J. of Heat and Mass Transfer v.41 no.12 Prediction of Heat Transfer in an Axisymmetric Turbulent Jet Impinging on a Flat Plate M. Behnia;S. Parneix;P. A. Durbin
  7. 21th Japan Heat Transfer Symposium 2-Dimensional Impingement Heat Transfer with Cross Section of Ribs J. Y. Cha;S. Kasagi;K. Hirata
  8. 18th Japan Heat Transfer Symposium A Study on Heat Transfer Augmentation in Impinging Jet (Ⅱ) M. M. Ali Khan;S. Kasagi;K. Hirata
  9. 18th Japan Heat Transfer Symposium A Study on Heat Transfer Augmentation in Impinging Jet M. M. Ali Khan;S. Kasagi;K. Hirata
  10. Proc. 9th Int. Heat Transfer Conference v.1 Impinging Heat Transfer Aug mentation due to Large Scale Eddies K. Kataoka