Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Turbulent Heat Transfer of an Oblique Impinging Jet on a Concave Surface

오목표면에 분사되는 경사충돌제트의 난류열전달 현상에 관한 연구

  • Published : 2000.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The turbulent heat transfer from a round oblique impinging jet on a concave surface were experimentally investigated. The transient measurement method using liquid crystal was used in this study. In this measurement, a preheated wall was suddenly exposed to an impinging jet while recording the response of liquid crystals to measure surface temperature. The Reynolds numbers were 11000, 23000 and 50000, nozzle-to-surface distance ratio was from 2 to 10 and the surface angles were a =$0^{\circ}\;15^{\circ},\;30^{\circ}and\;40^{\circ}$. Correlations of the stagnation point Nusselt numbers with Reynolds number, jet-to-surface distance ratio and dimensionless surface angle, which account for the surface inclined angle, are presented. The maximum Nusselt numbers, in this experiment, occurred in the direction of upstream. The displacement of the maximum Nusselt number from the stagnation point increases with increasing surface angle or decreasing nozzle-to-surface distance. In this experiment, the maximum displacement is about 0.7 times of the jet nozzle diameter when surface curvature, D/d is 10.

Keywords

References

  1. International Development in Heat Transfer Heat transfer between a flat plate and jets of air impinging on it Gardon, R.;Cobonpue, J.
  2. International Journal of Heat and Mass Transfer v.8 The role of turbulence in determining the heat transfer characteristics of impinging jets Gardon, R.;Akfirat, J. C.
  3. Experimental flow characteristics of a single turbulent jet impinging on a flat plate Hrycak, P.;Lee, D.T.;Gauntner, J.W.;Livingood, J.N.B.
  4. Advances in Heat Transfer v.13 Heat and mass transfer between impinging gas jet and solid surfaces Martin, H.
  5. Journal of Heat Transfer v.110 Heat transfer from a flat surface to an oblique impinging jet Goldstein, R.J.;Franchett, M. E.
  6. Journal of Fluid Mechanics v.100 no.Part 3 The impingement of under-expanded, axisymmetric jets on perpendicular and inclined flat plates Lamont, P.L.;Hunt, B.L.
  7. AIAA Journal v.19 Computations of the oblique impingement of round jets upon a plane wall Rubel, A.
  8. ASME Journal of Heat Transfer v.113 Surface curvature effect on slot-air jet impinging cooling flow and heat transfer process Gau, C.;Chung, C.M.
  9. Ph.D. Dissertation A preheated-wall transient method using liquid crystals for the measurement of heat transfer on external surfaces and in ducts Yan, X.
  10. KSME International Journal v.21(B) no.5 Concave surface curvature effect on heat transfer from a turbulent round impinging jet Lim, K.B.;Lee, D.H.
  11. ASME HTD v.226 The effect of Reynolds number on the heat transfer distribution from a flat plate to an impinging jet Yan, X.;Baughn, J.W.;Mesbah, M.
  12. Fouling and Enhancement Interactions v.164 An insertion technique using the transient method with liquid crystals for heat transfer measurements in ducts Baughn, J.W.;Yan, X.;Rabas, T.J.(ed.);Chenoweth, J.M.(ed.)
  13. ASME Collected Papers in Heat Transfer v.104 Effect of lateral and anisotropy conduction on determination of local convection on determination of local convection heat transfer characteristics with transient tests and surface coating Vedula, R.P.;Metzger, D.E.;Bickford, W.B.
  14. Mechanical Engineering v.75 no.1 Describing uncertainties in single sample experiments Kline, S.J.;McKlintock, F.A.
  15. KSME International Journal v.21(B) no.4 Heat transfer and flow characteristics of a circular jet impinging on a convex curved surface Lee, D.H.;Chung, Y.S.;Kim, D.S.;Lim, K.B.