Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Influence of Working Fluids to Heat Transfer Characteristics of the Heat Exchanger using Oscillating Capillary Tube Heat Pipe for Low Temperature Waste Heat Recovery

저온 폐열회수용 진동세관형 히트파이프 열교환기의 작동 유체에 따른 열전달 특성

  • Published : 2000.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Heat transfer characteristics of a heat exchanger for low temperature waste heat recovery using oscillating capillary tube heat pipe were evaluated against the charge ratio variation of working fluid and various working fluids. R-l42b, R-22 and R-290 were used as working fluids. The heat exchanger was composed of heat pipe with capillary tube bundles, having a 2.6mm in outer diameter, 1.4mm in inner diameter with 101m long, and 40 turns. Charge ratio of working fluid was 40% and 50%. Water was used as secondary fluid. Inlet temperature and mass velocity for each secondary fluid were 297 K, 280 K and9~27 kg /$m^2s$,, respectively. From experimental results, it was found that heat transfer performance of R-22 was higher than those of R-l42b and R-290 and it was proportional to Figure of merit for thermosyphons. As a result, it was thought that R-22 was the most suitable working fluid of waste heat recovery for low temperature waste heat recovery.

Keywords

References

  1. Aquaculture v.9 Heat exchanger using heat pipe Kim, J. S.
  2. International encyclopedia of heat & mass transfer Hewitt, G. F.;Shires, G. L.;Polezhaev, Y. V.
  3. Korean J. of Air-conditioning and Refrigeration Engineering v.19 no.6 Heat pipe and its application to energy saving Seo, J. Y.
  4. Korean J. of Air-conditioning and Refrigeration Engineering v.21 no.5 For air-conditioning heat exchanger using heat pipe Lee, Y. S.
  5. Proceedings of 7th general meeting conference of JSME v.3 no.940-10 Looped capillary tube heat pipe Akachi, H
  6. 2th two-phase flow modelling and experimentation v.3 The heat transfer characteristics of oscillation capillary tube heat pipe Lee, W. H.;Kim, J. H.;Kim, J, S.;Jang, I. S.
  7. 11th international heat pipe conference v.2 Flow visualization of oscillating capillary tube heat pipe Lee, W. H.;Jung, H. S.;Kim, J. S.;Kim, J. S.
  8. 34th National heat transfer symposium of Japan v.1 Bubble-driven heat transport tubbe(Flow patterns and heat transport model) Hosoda, M.;Nishio, S.;Shiraksshi, R.
  9. Journal of HTSJ v.3 no.142 Bubble driven heat transport tube Nishio, S.
  10. 34th National heat transfer symposium of Japan Bubble driven heat transport tube(Experiments of heat transfer characteristics) Nishio. S.;Hosoda, M.;Nagata, S.;Watanabe, K.
  11. 36th National heat transfer symposium of Japan Closed looped heat transport tube(Effects of operation liquid) Nagata, H.;Nishio, S.;Shirakashi, R.
  12. 36th National that transfer symposium of Japan Flow visualization experiment on oscillation heat pipe Gi, K.;Sato, R.;Maezawa, S.
  13. Heat pipe science and technology Amir Faghri
  14. An introduction to heat pipes Peterson, G. P.