Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

An Experimental Study on the Effect of Fluid Flow and Heat Transfer Characteristics by the Longitudinal Vortices

종방향 와동이 유체유동 및 열전달 특성에 미치는 영향에 관한 실험적 연구

  • 양장식 (부산대학교 기계기술연구소) ;
  • 김은필 (부경대학교 기계공학과)
  • Published : 2000.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

The flow characteristics and the heat transfer rate on a surface by interaction of a pair of vortices were studied experimentally. The test facility consisted of a boundary-layer wind tunnel with a vortex introduced into the flow by half-delta winglet protruding from the surface. In order to control the strength of the longitudinal vortices, the angles of attack of the vortex generators were varied from $\pm20\;degree\;to\;\pm45$ degree, but spacings between the vortex generators were fixed to 4 cm. The 3-dimensional mean velocity measurements were made using a five-hole pressure probe. Heat transfer measurements were made using the thermochromatic liquid to provide the local distribution of the heat transfer coefficient. By using the method mentioned above, the following conclusions were obtained from the present experiment. The boundary layer was thinned in the regions where the secondary flow was directed toward the wall and thickened where it was directed away from the wall. The peak augmentation of the local heat transfer coefficient occurred in the downwash region near the point of minimum boundary-layer thickness.

Keywords

References

  1. AIAA Journal v.26 no.7 Experimental study of the development of longitudinal vortex pairs embedded in a turbulent boundary layer Pauley, W. R.;Eaton, J. K.
  2. AIAA Journal v.32 no.11 Flow structure in the wake of a wishbone vortex generator Wendt, B. J.;Hingst, W. R.
  3. AIAA Journal v.31 no.2 Structure and development of streamwise vortex arrays embedded in a turbulent boundary layer Wendt, B. J.;Grebert, I.;Hingst, W. R.
  4. ASME Journal of Heat Transfer v.109 Heat transfer effects of a longitudinal vortex embedded in a turbulent boundary layer Eibeck, P. A.;Eaton, J. K.
  5. zeitschrift fur angewandte mathematik und mechanik v.77 no.1 Vortices and Heat transfer Fiebig, M.
  6. International Journal of Heat and Mass Transfer v.38 no.3 Numeracal investigation of turbulent flows and heat transfer in a rib-roughened channel with longitudinal vortex generators Zhu, J. X.;Fiebig, M.;Mitra, N. K.
  7. ASME Journal of Heat Transfer v.115 Evaluation of a hue capturing based transient liquid crystal method for high-resolution mapping of convective heat transfer on curved surfaces Camci, C.;Kim K. Hippensteele, S. A.;Pointsatti, P. E.
  8. ASME Journal of Heat Transfer v.111 Improved liquid-crystal thermometry excluding human dolor sensation Akino, N.;Kunugi, T.;Ichimiya, K.;Mitsushiro, K.;Usda, M.
  9. ASME Journal of Engineering for Gas Turbines and Power v.107 Local heat transfer measurements on a large scale-model turbine blade airfoil using a composite of a heat element and liquid crystals Hippensteele, S. A.;Russell, L. M.;Torres, F. J.
  10. KSME Journal v.19 no.9 An experimental investigation of the heat transfer characteristics on the endwall surface within the plane turbine cascade Yang, J. S.;Na, J. M.;Lee, K. B.
  11. SAREK Journal v.9 no.4 Experimental investigation on heat transfer with a two-dimensional oblique impinging jet Yoon, S. H.;Kim, M. K;Lee, D. E.
  12. SAREK Journal v.11 no.5 An experimental study on the heat transfer augmentation by using the multiple orifice nozzle Jung, G. H.;Kim, Y. Y.;Kim, S. K.;Seo, T. B.
  13. KSAS Journal v.23 no.2 The calibration and application of 5-hole probe using cubic spline interpolation Lee, K. B.;Yang, J. S.
  14. An experimental study on the interaction and flow characteristics of longitudinal vortex pairs Han, D. J.
  15. Experimental Methods for Engineers Holman, J. P.
  16. ASME Journal of Fluids Engineering v.107 ASME measurement uncertainty Abernethy, R. B.;Benedict, R. P.;Dowdell, R. B.