Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Development and Comparative Study on Tire Models In the AutoDyn7 Program

  • Han, Dong-Hoon (Graduate School of Mechanical Design and Production Engineering, Pusan National University) ;
  • Sohn, Jeong-Hyun (Graduate School of Mechanical Design and Production Engineering, Pusan National University) ;
  • Kim, Kwang-Suk (Inha Technical College) ;
  • Lee, Jong-Nyun (Dogseo University) ;
  • Yoo, Wan-Suk (Department of Mechanical Engineering, Pusan National University) ;
  • Lee, Byun-Hoon (Department of Mechanical Engineering, Pusan National University) ;
  • Choi, Jae-Weon (Department of Mechanical Engineering, Pusan National University)
  • Published : 2000.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, several tire models (Magic formula, Carpet plot, VA tire, DADS tire and STI tire) are implemented and compared. Since the STI (System Technology Inc.) tire model in the AutoDyn7 program is in a good agreement to NADSdyna STI tire model and experiment, it is selected as a reference tire model for the comparison. To compare tire models, input parameters of each tire model are extracted from the STI tire model to preserve the same tire properties. Several simulations are carried out to compare performances of tire models, i. e., bump simulation, lane change simulation, and pulse steering simulation. The performances in vehicle maneuverability are also compared with the four parameter evaluation method.

Keywords

References

  1. Bernard. J. E. Segel, L. and Wild, R. E., 1977, 'Tire Shear Force Generation During Combined Steering and Braking Maneuvers,' SAE Transactions 770852
  2. Choi, DaeHyung, 1999, 'Derivation of the Coefficients of the MAGIC FORMULA from Carpet Plot and Simulation, Master's thesis, PNU
  3. Dugoff, H., 1977, 'An Analysis of Tire Traction Properties Which May Influence of Vehicle Dynamic Performance,' SAE Transactions 770377
  4. Fiala, E.,1954, 'Seitenkrafte am Rollenden Luftreifen,' Z. VDI, Vol. 96, No. 29
  5. Gim, Gwanghun, 1990, 'An Analytical Model of Pneumatic Tyres for Vehicle Dynamic Simulations,' Int. J. of vehicle Design, Vol. 1. No. 1
  6. Kim, KwangSuk, Yoo, WanSuk, Kim, SungSoo, Kim, SangSup, 1999, 'Development of Vehicle Dynamics Program AutoDyn7 (I)-Structure and Algorithm,' Transactions of KSAE, Vol. 7, No .3, pp. 321-330
  7. Lee, MinSeung, 1997, 'Development UA tire model for vehicle dynamics program AutoDyn7,' Master's thesis, PNU
  8. Mimuro, T., 'Four Parameter Evaluation Method of Lateral Transient Response,' SAE paper, 901734
  9. Pacejka, H. B., 1979, 'Tyre Factors and Vehicle Handling,' Int. J. of vehicle Design, Vol. 1. No. 1
  10. Salaani, Mohamed Kamel, 1996, 'Development and Validation of a Vehicle Model for the National A Dvanced Driving Simulator,' Ph. D, Ohio State Univ.
  11. 1997, DADS (Dynamic Analysis and Design System) User's Reference Manual, Computer Aided Design Software Inc.