Experimental Study on the Microencapsulated PCM as a Thermal Storage Medium

미립잠열재를 이용한 축열 특성에 관한 실험적 연구

  • 이효진 (대전산업대학교 건축설비공학과) ;
  • 이재구 (한국에너지기술연구소 에너지환경연구부)
  • Published : 2001.02.01

Abstract

Microencapsulated PCM particles are mixed with distilled water and utilized to evaluate its characteristics and performance as a thermal storage medium transporting heat. For the present study, tetradecane(C$_14H_30, T_m=5.5^{\circ}C$) is capsulated in the core with the melamine of its surface. The size of particles is well-controlled under 10${\mu}{\textrm}{m}$ in the way of in-situ polymerization with melamine-formaldehyde resin. For the experiment, the concentrations of slurries are prepared for 20wt%, 30wt%, and 40wt%. The results are compared with those of water and 100% tetradecane oil. The pure water and tetradecane start solidifying within 20 minutes after introducing cooling water into the thermal storage tank whose tank whose flow rates are varied by 125cc/min, 250cc/min, and 500cc/min. However, MicroPCM slurries are required relatively longer period of time for their phase change than pure phase change materials. That is, the entrained MicroPCM particles control its heat transfer in terms of natural convection and conducting to them.

Keywords

References

  1. Solar Energy v.30 no.4 Low temperature latent heat thermal storage: Heat storage materials Abhat, A.
  2. R&D Pilot plant Project for Evaluate a Direct Freeze Ice Slurry Based District Cooling System;DOE/CE/26564 Knodel;B.D.
  3. Proceedings, Annual Conference of the International District Heating and Cooling Association Impact of advanced fluid on costs of district cooling systems Choi, U. S.;France, D. M.;Knodel, B. D.
  4. Applicatiom of phase change materials to thermal control of electronic modules:A Computational study:Advances in Electronic Packaging Measurement of Pressure Drop and Heat transfer in Tubulet Pipe Liu;K.V.;Choi;U.S.;Kasza;K.E.
  5. Advances in Electronic Packaging v.10 no.2 Application of phase change materials to thermal control of electronic modules: A Computational study Pal, D.;Joshi, Y. K.
  6. AIAA paper no.94-2004 Use of two component fluids of microencapsulated phase-change materials for heat transfer in slacecraft thermal systems Mulligan;J.C.;Colvin;P.D.;Bryant;Y.G.
  7. Int J.Heat Mass Transfer v.37 no.4 Laminar forced convection heat transfer in microencapsulated phase change material suspensions Goal;M;Roy;s.k.;Swngupta;S.
  8. The 16TH Japan Symposium on Thermophsical Properties v.16 Evaluation of thermophysical properties of fine latent heat storage and water mixture Inaba;H.;Fujisaki;M.;Morita;A.
  9. IRCEC-96 An Evaluation of microencapsulated medium Yamagishi;Y.Surgeno;T.Ishige;T.;Takeuchi;H.;Pyatenko;A.
  10. Thies Technology How to Make Microcapsules Thies
  11. J. of Solar Energy Engineering v.121 Heat transfer in vertically aligned phase change energy storage system El-Dessouky;H.T.;Bouthamra;W.S.;Ettouney;H.M.;Akbar;M.