Thermal Performance Evaluation of Design Parameters and Development of Load Prediction Equations of Office Buildings

사무소 건설의 설계변수 열성능 평가 및 부하예측방정식 개발

  • Published : 2001.09.01

Abstract

The objective of this study is to evaluate the design parameters and to develop the cooling and heating load prediction equations of office buildings. The building load calculation simulation was carried out using the DOE-2.1E program. The results of the simulation was used as a data for ANOVA and multiple regression analysis which could develop the load prediction equations.

Keywords

References

  1. Report of the Ministry of Construction Study on the improvement of energy standards for buildings Kim, K. S.(et al.)
  2. Report of the Ministry of Construction Energy standards for commercial and office buildings Lee, M. H.(et al.)
  3. Experimental design by Taguchi method Park, S. H.
  4. Seoul Standard Weather Data SAREK
  5. Proceedings of the AIK A Study on the design parameters evaluation for the office building thermal performance using the experimental design Seok, H. T.
  6. A Study on the development of load prediction aquation and design guidelines for the energy conservation of office buildings Seok, H. T.
  7. ASHRAE Trans. v.98 The relative importance of various geometrical design parameters in a hot, humid climate Shaviv, E.;Capeluto, I. G.
  8. Ph.D. thesis, Seoul National Univ. A Study on the development of load prediction equation and design guidelines for the energy conservation of office buildings Seok,H.T.
  9. ASHRAE Trans. v.98 The relative importance of various geometrical design parameters in a hot, humid climate Shaviv,E.;Capeluto,I.G.