Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Structural Analysis for the Determination of Design Variables of Spent Nuclear Fuel Disposal Canister

  • Youngjoo Kwon (Department of Mechano-Informatics & Design Engineering, Hongik University) ;
  • Shinuk Kang (Department of Mechano-Informatics & Design Engineering, Hongik University) ;
  • Park, Jongwon (Korea Atomic Energy Research Institute) ;
  • Chulhyung Kang (Korea Atomic Energy Research Institute)
  • Published : 2001.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the results of a structural analysis to determine design variables such as the inner basket array type, and thicknesses of the outer shell, and lid and bottom of a spent nuclear fuel disposal canister. The canister construction type introduced here is a solid structure with a cast iron insert and a corrosion resistant overpack, which is designed for the spent nuclear fuel disposal in a deep repository in the crystalline bedrock, entailing an evenly distributed load of hydrostatic pressure from the groundwater and high swelling pressure from the bentonite buffer. Hence, the canister must be designed to withstand these high pressure loads. Many design variables may affect the structural strength of the canister. In this study, among those variables, the array type of inner baskets and thicknesses of outer shell and lid and bottom are attempted to be determined through a linear structural analysis. Canister types studied hear are one for the pressurized water reactor (PWR) fuel and another for the Canadian deuterium and uranium reactor (CANDU) fuel.

Keywords

References

  1. Ahonen, L., 1995, 'Chemical Stability of Copper Canisters in Deep Repository,' Report YJT-94-13, Nuclear Waste Commission of Finnish Power Companies, Helsinki, Finland, p. 101
  2. Anttila, M., 1996, 'Criticality Safety Calculations for the Nuclear Waste Disposal Canisters,' Report POSIVA-96-11, Posiva Oy, Helsinki, Finland
  3. Anittla, M., 1999, 'Criticality Safety Calculations of the Nuclear Waste Disposal Canisters for Twelve Spent Fuel Assembles,' Working Report 99-03, Posiva Oy, Helsinki, Finland, p. 20
  4. Auerkari, P. and Holmstrom, S., 1997, 'Long-Term Strength of EB Welds the Canister for Nuclear Fuel Disposal,' Working Report 97-35e, Posiva Oy, Helsinki, p. 21
  5. Borgesson L., 1992, 'Interaction Between Rock. Bentonite Buffer and Canister. FEM Calculations of Some Mechanical Effects of Canister in Different Disposal Concepts,' Technical report TR 92-20, Swedish Nuclear fuel and Waste Management Co.(SKB), Stockholm, Sweden, ISSN 0284-3751. p. 83 + appendixes
  6. Jo, J. C., Lee, S. K. and Shin, W. K., 1991, 'Heat Transfer of a Spray Droplet in a PWR Pressurizer,' KSME Journal, Vol. 5, No. 2, pp. 130-139
  7. Kim, Y. J., Son, J. H., Chung, H. D., and Kim, J. D., 1994, 'Expect System Approach for Reactor Vessel Integrity,' KSME Journal, Vol. 8, No. 2, pp. 198-205
  8. Kwak, S. L., Lee, J. S., Kim, Y. J. and Park, Y. W., 2000, 'Development of CANDU Pressure Tube Integrity Evaluation System-Its Application to Sharp Flaw and Blunt Notch,' Transactions of the KSME, Vol. 24, No. 1, pp. 206-214
  9. Raiko, H. and Salo, J. P., 1992, 'The Design Analysis of ACP-Canister for Nuclear Waste Disposal,' Report YJT-92-05, Nuclear Waste Commission of Finish Power Companies, Helsinki, Finland
  10. Raiko, H. and Salo, J., 1996, 'Design Report of the Canister for Nuclear Fuel Disposal,' Report POSIVA 96-13, Posiva Oy, Helsinki, ISBN 951-652-012 x, Finland
  11. Raiko, H. and Salo, J. P., 1999, 'Desig Report of the Disposal Canister for Twelve Fuel Assemblies,' Report Posiva-99-18, Posiva Oy, Helsinki, Finland
  12. Salo, J. P. and Raiko, H., 1990, 'The Copper/Steel Canister Design for Nuclear Waste Disposal,' TVP/KPA Turvallisuus ja tekniikka, Work Report 90-10. Rev. 1., Teollisuuden Voima Oy, Helsinki, Finland
  13. Werme l. and Erikksson J., 1995, 'Copper Canister with Cast Inner Component,' Technical Report TR-95-02, Swedish Nuclear fuel and Waste Management Co. (SKB),' Stockholm, ISSN 0284-3757, Sweden