Evaluation of Required Discharge Capacity for Prefabricated Vertical Drains

연직배수재의 소요통수능 평가

  • 김상규 (동부산대 학장) ;
  • 김현태 (농업기반공사 농어촌연구원 책임연구원) ;
  • 공길용 (농업기반공사 농어촌연구원)
  • Published : 2001.02.01

Abstract

Bergado에 의해 비교 분석된 많은 연구자들의 배수재의 소요통수능에 대한 제안값을 보면 0.32~50cc/s로 그 차이가 너무 크기 때문에 실무에 적용하기가 어렵다. 본 연구에서는 배수재의 통수능변화를 고려할 수 있는 압밀해석방법을 개발하고, 흙의 압밀계수, 압축지수, 배수재 타설심도 및 타설후 시간경과에 따른 배수재의 통수능 감소 등의 현장여건을 고려한 압밀해석을 통하여 압밀지연을 일으키지 않는 배수재의 소요통수능에 대한 기준을 제시하였다. 압밀해석결과 어느값 이상의 통수능에서는 압밀지연이 없으므로 이 값 이상의 통수능을 갖는 배수재를 선택하는 것이 중요하며, 압밀지연시간 5% 이내인 배수재의 소요통수능은 압밀계수($c_{v}$ ), 배수재의 길이(L) 및 압축지수($C_{c}$)와 비례관계로서 안전율 1.5를 고려하여 $q_{wa}$ =8$\times$($c_{v}$ $\times$L$\times$$C_{c}$)(cc/s) 이상이면 되는 상관식을 얻었다. 이 값 이상의 배수재를 선택하는 경우는 연직배수공법의 압밀해석에서 배수재의 통수능을 고려하지 않아도 된다는 결론을 얻었다.

Keywords

References

  1. 한국지반공학회지 v.16 no.2 스미어죤의 투수성변화를 고려한 연직배수공법의 압밀해석 김상규;김현태;홍병만
  2. Geotextiles and Geomiembranes v.10 The flow behaviour of deformed prefabricated vertical drain Ali, F.H
  3. Geotextiles and Geomembranes v.14 Proposed criteria for discharge capacity of prefabricated vertical drains Bergado, D.T.;Manivannan, R.;Balasubramaniam, A.S
  4. Fifth international conference on Geotextiles, Geomemberanes and related products Singapore Measuring the discharge Capacity of band drains by a new drain tester Broms, B.B.;Chu, J.;Choa, V
  5. Ground Engineering v.12 no.5 Consolidation of clay by band-shaped prefabricated vertical drains Hansbo, S.
  6. Proc. 10th Int. conf. Soil Mech. Found. Eng. v.3 Consolidation of fine-grained soils by prefabricated drains Hansbo, S
  7. Geotechnique 47 no.5 Aspacts of vertical drain disign: Darcian or non-Darcian flow Hansbo, S
  8. Geo-Coast'91 Laboratory testing of perfabricated wick drains Holtz, R.D.;Lancellotta, R.;Jamiolkowsky, M;Pedroni S
  9. Solids and Foundations v.28 no.4 Consolidation by vertical drains taking well resistamce and smear into consideration Onoue, A
  10. 博士學位論文 低平地に堆積する海成粘土の土質特性と鉛直排水工法による地盤改良に關する硏究 朴永穆