Korean Journal of Metals and Materials (대한금속재료학회지)

The Korean Institute of Metals and Materials (대한금속재료학회)
권호 표지

A Study on the Foam Characteristics of Hydrogen Treated Ti Scrap

수소처리된 Ti scrap의 발포특성 연구

Ahn, Duck-Kyu;Hur, Bo-Yong;Kim, Sang-Youl;Park, Su-Han;Ahn, Hyo-Jun;Park, Sun-Jung
안득규;허보영;김상열;박수한;안효준;박선정

  • Published : 2002.08.22
⟨ Previous Next ⟩

Abstract

In the process of metal foaming, hydride metal often is used as foaming agent. In our experiment $TiH_2$ was chosen as foaming agent to produce the Al foams. Ti scraps were usually produced in the machining process of panels, wire and pipes. To recycle Ti scraps, Ti scraps of various shape as like plate, chip, pipe etc., were hydrogen-treated in self-made hydride furnace. The samples were milled in a ball mill, and then morphologies of milled particles were observed by SEM. Laser and SEM were used to analyze the size distribution, and XRF, XRD, TG-DTA analysis were performed to investigate the composition and reaction conditions to prove the foaming possibility of forming agent in the production of Al foams.

Keywords

References

  1. The actual of Resources Recycling The Korean Institute of Resources Recycling
  2. Chemistry and Physics v.74 Wu, T.I.;Wu, J.K.
  3. Hydrogen Energy v.27 Elias, R.J.;Corso, H.L.;Gervasoni, J.L. https://doi.org/10.1016/S0360-3199(01)00082-9
  4. Alloys and Compounds v.293-295 Goltsova, M.V.;Artemenko, Y.A.;Zaitsev, V.I. https://doi.org/10.1016/S0925-8388(99)00374-6
  5. Metals and Materials v.6 Kim, S.H.;Park, Y.I. https://doi.org/10.1007/BF03026356
  6. Hydrogen Energy v.20 FoKin, V.N.;Malov, Y.I.;Fokina, E.E.;Troitskaya, S.L.;Shilkin, S.P. https://doi.org/10.1016/0360-3199(94)00075-B
  7. Alloys and Compounds v.231 Fernandez, J.F.;Cuevas, F.;Alguero, M.;Sanchez, C. https://doi.org/10.1016/0925-8388(95)01841-7
  8. Russian J. Phys. Chem. v.59 Lunin, V.V.;Solovetskii, Y.I.
  9. Alloys and Compounds v.310 Wipf, H.;Kappesser, B.;Werner, R. https://doi.org/10.1016/S0925-8388(00)00945-2
  10. Alloys and Compounds v.259 Kaess, U.;Majer, G.;Stoll, M. https://doi.org/10.1016/S0925-8388(97)00124-2
  11. Engineering Failure Analysis v.8 Carter, T.J.;Cornish, L.A. https://doi.org/10.1016/S1350-6307(99)00040-0
  12. Metals and Materials v.2 Chang, W.S.;Muddle, B.C. https://doi.org/10.1007/BF03026098
  13. Metals and Materials v.2 Kim, H.S.;Suhr, D.S.;Kim, G.H.;Kum, D.W. https://doi.org/10.1007/BF03025942
  14. Metals and Materials v.2 Kim, S.S.;Rhee, M.H.;Lee, C.S. https://doi.org/10.1007/BF03025945
  15. Metals and Materials v.3 Yoo, M.H.;Hishinuma, A. https://doi.org/10.1007/BF03026128