Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

The Experimental Study of the Interaction Between the Flow rind Temperature Field and a Boundary Layer Due to a Variety of tole Height of a Vortex Generator

와동 발생기 높이 변화에 대한 경계층 내의 유동장과 온도장에 관한 실험적 연구

  • Published : 2002.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of the interaction between the flow and temperature field and a boundary layer due to a variety of the height of a vortex generator are experimentally investigated. The test facility consists of a boundary-layer wind tunnel with the vortex generator protruding from the bottom surface. In order to control the strength of the longitudinal vortices, the angle of attack and the spacing distance of the vortex generator are 20 degree and 40 mm, respectively. The height of the vortex generator (H) is 15 mm, 20 mm and 30 mm and the cord length of it is 50 mm. Three-component mean velocity measurements are made using a 5-hole probe system and the surface temperature distribution is measured by the hue capturing method using thermochromatic liquid crystals. By using the method mentioned above, the following conclusions are obtained from the present experiment. The boundary layer is thinned in the downwash region where the strong downflow and the lateral outflow of the boundary layer fluid occur and thickened in the upwash re,3ion where the longitudinal vortex sweeps low momentum fluid away from the bottom surface. In case that the height of the vortex generator increases, the averaged circulation and the maximum vorticity of the vortex pair decrease. The contours of the non-dimensional temperature show the similar trends fur all the cases (H=15 mm, 20 mm and 30 mm). The peak augmentation of the distribution of the local non-dimensional temperature occurs in the downwash region near the point of minimum boundary-layer thickness.

Keywords

References

  1. Fiebig, M., 1997,'Vortices and Heat Transfer,' Zeitschriji fur Angewandte Mathematik und Mechanik, Vol. 77, No.1, pp. 3 -18 https://doi.org/10.1002/zamm.19970770103
  2. Reichert, B. A. and Wendt, B. J., 1993, 'An Experimental Investigation off S-Duct Flow Control Using Arrays of Low Profile Vortex Generations,' AIAA Paper 93 - 0019
  3. Wendt, B. J. and Hingst, W. R., 1994, 'Flow Structure in the Wake of a Wishbone Vortex Generator,' AIAA Journal, Vol. 32, No. 11, pp. 2234-1140 https://doi.org/10.2514/3.12282
  4. Wendt, B. J. and Greber, I., 1993, 'Structure and Development of Streamwise Vortex Arrays Embedded in a Turbulent Boundary Layer,' AIAA Journal, Vol. 31, No.2, pp. 2427-2444
  5. Pauley, W. R. and Eaton, J. K., 1988, 'The Fluid Dynamics and Heat Transfer Effects of Streamwise Vortices Embedded in a Turbulent Boundary Layer,' Report MD-51, Department of Mechanical Engineering, Stanford University
  6. 양장식, 나종문, 이기백, 1995, '선형 터빈 캐스케이드 끝벽의 열전달 특성에 관한 연구,' 대한기계학회, 제19권, 제9호, pp. 2386-2398
  7. 이기백, 김태영, 양장식, 1997, '색상포착기법과 수치 계산을 이용한 3차원 밀폐공간 내의 자연대류 연구,' 대한기계학회논문집(B), 제21권, 제12호, pp. 1595-1607
  8. Gillespie, D. R., Wang, Z. and Ireland, P. T., 1995, Heating Element, 'Patent Application PCT/GB96/02017
  9. 양장식, 1995. '선형 터빈 익렬 내의 3차원 유동과 끝벽의 열전달 특성에 관한 연구.' 부산대학교 박사학위논문
  10. 한동주, 1999, '종방향 와동쌍의 상호작용과 유동특성에 관한 연구,' 부산대학교 석사학위논문
  11. Weshphal, R. V., Pauley, W. R. and Eaton, J. K.,1987, 'Interaction Between a Vortex and a Turbulent Boundary Layer-Part I: Mean Flow Evolution and Turbulence Properties,' NASA TM88361
  12. Abernethy, R. B., Benedict, R. P. and Dowedell, R. B., 1985, ASME Measurement Uncertainty,' ASME Jounral of Fluids Engineering, Vol. 107, pp. 161-164 https://doi.org/10.1115/1.3242450