DOI QR코드

DOI QR Code

Remote Fuzzy Logic Control of Networked Control System Via Profibus-DP

Profibus-DP를 이용한 네트워크 기반 제어 시스템의 원격 퍼지 제어

  • Lee, Kyung-Chang (Mechanical Technology Research Center, Dept.of Mechanical Engineering, Busan National University) ;
  • Lee, Suk (Mechanical Technology Research Center, Dept.of Mechanical Engineering, Busan National University)
  • 이경창 (부산대학교 기계공학부 및 기계기술연구소) ;
  • 이석 (부산대학교 기계공학부 및 기계기술연구소)
  • Published : 2002.04.01

Abstract

This paper investigates on the feasibility of fuzzy logic control for networked control systems. In order to evaluate its feasibility, a networked control system for motor speed control is implemented on a Profibus-DP network. The NCS consists of several inde-pendent, but interacting processes running on two separate stations. By using this NCS, the network-induced delay is analyzed to find the cause and effect of the delay. Furthermore, in order to prove the feasibility, the fuzzy logic controller's performance is compared with those of conventional PID controllers. Based on the experimental results, the fuzzy logic controller can be a viable choice far NCS due to its robustness against parameter uncertainty.

Keywords

References

  1. A. Ray, 'Networking for computer-integrated manufacturing,' IEEE Network, vol. 2, no. 3, pp. 40-47, 1988 https://doi.org/10.1109/65.3272
  2. 홍승호, '필드버스 기술 동향,' 제어.자동화.시스템 공학회지, 제4권, 제6호, pp. 13-18, 1998
  3. 권욱현, 김영신, '분산 실시간 시스템에서의 네트워크프로토콜,' 제어.자동화.시스템공학회지, 제4권, 제6호, pp. 27-34, 1998
  4. 이경창, 김기웅, 김희현, 이석, '실시간 폐루프 제어 시스템을 위한 Profibus-FMS 네트워크의 구현,' 제어.자동화.시스템공학회 논문지, 제6권, 제5호, pp. 92-98, 2000
  5. IEC 61158-4, Digital Data Communication for Measurement and Control- Fieldbus for Use in Industrial Control Systems - Part 4: Data Link Protocol Specification, IEC, 1999
  6. G. C. Walsh, and Y. Hong, 'Scheduling of networked control systems,' IEEE Control Systems Magazine, vol. 21, no 1, pp. 57-65, 2001 https://doi.org/10.1109/37.898792
  7. W. Zhang, M. S. Branicky, and S. M. Phillips, 'Stability of networked control systems,' IEEE Control Systems Magazine, vol. 21, no. 1, pp. 84-99, 2001 https://doi.org/10.1109/37.898794
  8. Y. Halevi, and A. Ray, 'Integrated communication and control systems: Part I. analysis,' Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol. 110, pp. 367-373, 1988 https://doi.org/10.1115/1.3152698
  9. J. Nilsson, Real-Time Control Systems with Delays, Ph. D. dissertation, Dept, Automatic Control, Lund Institute of Technology, Lund, Sweden, 1998
  10. EN 50170, Profibus Specification - Normative Parts of Profibus-FMS, -DP, -PA According to the European Standard, vol.2, 1998
  11. K. Bender, Profibus-The Fieldbus for Industrial Automation, Prentice-Hall, 1993
  12. 이경창, 이석, '유전자 알고리즘을 이용한 네트워크 기반 제어 시스템의 원격 제어기 설계,' 제어.자동화.시스템공학 논문지, 제8권, 제1호, 2002
  13. O. J. Smith, 'Closer control of loops with dead time,' Chemical Engineering Process, vol. 53, no. 5, pp. 217-219, 1959
  14. M. Morari and E. Zafiriou, Robust process control, Prentice-Hall, 1989
  15. J. G. Ziegler, and N. B. Nichols, 'Optimum settings for automatic controllers,' Transactions on ASME, vol. 64, 1942
  16. M. J. Jang and C. L. Chen, 'Fuzzy successive modeling and control for time-delay system,' International Journal on Systems Science, vol. 27, no. 12, pp. 1483-1490, 1996 https://doi.org/10.1080/00207729608929355
  17. F. Zhao, J. Ou, and W. Du, 'Pattern-based fuzzy predictive control for a chemical process with dead time,' Engineering Applications of Artificial Intelligence, vol. 13, pp. 37-45, 2000 https://doi.org/10.1016/S0952-1976(99)00035-4
  18. F. Betin, D. Pinchon, and G. A. Capolino, 'Fuzzy logic applied to speed control of a stepping motor drive,' IEEE Transactions on Industrial Electronics, vol. 47, no. 3, pp. 610-622, 2000 https://doi.org/10.1109/41.847902
  19. C. C. Lee, 'Fuzzy logic in control systems: Fuzzy logic controller - Part I and II,' IEEE Transactions on systems Man, and Cybernetics, vol. SMC-20, no. 2, pp. 404-435, 1990 https://doi.org/10.1109/21.52551
  20. C. C. Lee, 'Fuzzy logic in control systems: Fuzzy logic controller - Part I and II,' IEEE Transactions on systems Man, and Cybernetics, vol. SMC-20, no. 2, pp. 404-435, 1990 https://doi.org/10.1109/21.52552
  21. G. Li, K. M. Tsang, and S. L. Ho, 'Fuzzy based variable step approaching digital control for plants with time delay,' ISA Transactions, vol. 37, pp. 167-176, 1998 https://doi.org/10.1016/S0019-0578(98)00016-0
  22. K. Ogata, Modern Control Engineering, Prentice-Hall, pp. 257-270, 1990