Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

Effects of Fuel Injection Timing on Exhaust Emissions Characteristics in Marine Diesel Engine

선박용 디젤기관의 연료분사 시기가 배기배출물 특성에 미치는 영향

  • Published : 2002.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

A study on the exhaust emissions of marine diesel engine with various fuel injection timing is performed experimentally .In this paper, fuel injection timing is changed from BTDC $14^{\circ}$ to $20^{\circ}$ by $2^{\circ}$ intervals, the experiments are performed at engine speed 1800rpm and from load 0% to 100% by 25% intervals, and main measured parameters are fuel consumption rate, Soot, NOx, HC and CO emissions etc. The obtained conclusions are as follows (1) Specific fuel consumption is indicated the least value at BTDC $18^{\circ}$ of fuel injection timing and it is increased in case of leading the injection timing. (2) Soot emission is decreased in case of leading fuel injection timing and it is increased in the form of convex downwards with increasing the load. (3) NOx emission is increased in case of leading fuel injection timing and it is increased in the form of straight line nearly with increasing the load. (4) HC and CO emissions are decreased in case of leading fuel injection timing and they are changed in the form of convex downwards with increasing the load.

Keywords

References

  1. SAE 890851 Fuel Injection Equipment for Heavy-duty Diesel Engines for U.S. 1991/1994 Emission Limits Stumpp G.;Polach W.;Muller N.;Warga J.
  2. USA-Code : Title 40 Emissions Standards for Vehicles USA-Environmental Protection Agency
  3. Technical code on control of emission of nitrogen oxides from marine diesel engine Technical code on control of emission of nitrogen oxides from marine diesel engine International Maritime Organization
  4. 한국박용기관학회지 v.20 no.3 선박용디젤기관의 환경문제 전효중
  5. CIMA'73 Reduction of Exhaust Emissions of Diesel Engines by means of the Injection Equipment Stumpp G.
  6. SAE 900854 Injection Timing and Rate Control a Solution for Low Emissions Needham J.R. (et al)
  7. SAE 811196 Effects of Intake-Air Composition on Gas-Phase and Particulate-Bound HC Emissions from Diesel Engines Ahmad T.;Plee S.L.;Myers J.P.
  8. SAE 841053 The Effects of Coolant Temperature on the Performance and Emissions of a Single-Cylinder Divided-Chamber Diesel Engine Alkidas A.C.;Cole R.M.
  9. SAE 80048 Sources of Hydrocarbon Emissions from Direct Injection Diesel Engines Yu R.C.;Wong V.W.;Shahed S.M.
  10. 自動車技術會論文集 v.24 no.4 ヂィゼル機關におけるEGR過給の組み合ぁせよる排出特性改善 內田 登 (외3명)
  11. SAE 740104 Optimizing Engine Parameters with Exhaust Gas Recirculation Gumbleton J.J.;Bolton R.A.;Lang H.W.
  12. SAE 811195 Flame Temperature Correlation for the Effects of EGR on Diesel Particulate and NOx Emissions Plee S.L.;Ahamed T.;Myers J.P.
  13. Internal Combustion Engine Fundamentals John B. Heywood
  14. Bulletin of the M.E.S.J. v.18 no.1 Effects of cylinder Temperature and pressure on Ingition Delay in Direct Injection Diesel Engine Soon-Ik Kwon (et al)