Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Micro Machine Tools and Micro Machining

초소형 공작기계와 미세가공

  • 배영호 (영남대학교 기계공학과 대학원) ;
  • 김희술 (영남대학교 기계공학부) ;
  • 고태조 (영남대학교 기계공학부)
  • Published : 2002.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. G. Benavides, P. Yang,D. Adams, 'Meso-machining capabilities,' NSF Workshop on Micro/Meso Mechanical Manufacturing, May 16, Northwestern University, 2000
  2. Z. Yu, K. P. Rajukar, 'Generation of complex micro cavities by micro EDM,' Transactions of NAMRI/SME, Vol. 28, pp. 233-238, 2000
  3. J. Qian, H. Ohmori, T. Kato, 'Fabrication of micro shapes of advanced materials by Elid-grinding,' Transactions of NAMRI/SME, Vol. 28, pp. 269-274, 2000
  4. T. Moriwaki, E. Shamoto, 'Ultraprecision diamond turning of stainless steel by applying ultrasonic vibration,' Annals of the CIRP, Vol. 40, No. 1, pp. 559-562, 1991 https://doi.org/10.1016/S0007-8506(07)62053-8
  5. C.R. Friedrich, P.J. Coane, M. J. Vasile, 'Micromilling development and applications for microfabrication,' MICROELECTRONIC ENGINEERING, Vol. 35, pp. 367-372, 1997 https://doi.org/10.1016/S0167-9317(96)00198-0
  6. 안치현, 김규만, 주종남, '전기화학적 에칭을 이용한 텅스텐 미세 탐침가공,' 한국정밀공학회지, Vol. 18, No. 2, pp. 111-118, 2001
  7. A. C. Wang, B. H. Yan, X. T. Li, F. Y. Huang, 'Use of micro ultrasonic vibration lapping to enhance the precision of microholes drilled by micro electro-discharge machining,' Int. J. of Mach. Tools & Manufact., Vol. 42, pp. 915-923, 2002 https://doi.org/10.1016/S0890-6955(02)00025-1
  8. B. Bhattacharyya, S. Mitra, A. K. Boro, 'Electrochemical machining: new possibilties for micromachining,' Robotics and Computer Integrated Machining, Vol. 18, pp. 283-289 https://doi.org/10.1016/S0736-5845(02)00019-4
  9. J. J. Sun, H. G. Huang, Z. Q. Tian, L. Xie, J. Luo, X. Y. Ye, Z. Y. Zhou, S. H. Xia, Z. W. Tian, 'Three-dimensional micromachining for microsystems by confined etchant layer technique,' Electrochimica Acta, Vol. 47, pp. 95-101, 2001 https://doi.org/10.1016/S0013-4686(01)00596-5
  10. W.A. Beck, 'Recent advances in laser micromachining,' Proc. of SPIE, pp. 2-15, 2000
  11. Y. Okazaki, T. Kitahara, 'NC micro-lathe to machine micro-parts,' American Society for Precision Engineering, Vol. 22, pp. 575-578, 2000
  12. N. Lobontiu, M. Goldfarb, E. Garcia, 'A piezoelectric-driven inchworm locomotion device,' Mechanism and Machine Theory, Vol. 36, pp. 425-443, 2001 https://doi.org/10.1016/S0094-114X(00)00056-2
  13. 박창엽, '전지전자용 압전세라믹스,' pp. 174-161, 1995
  14. PI 社, 'Nanopositioning,' pp. 1.6, 4.24-25, 1998
  15. J. M. Paros and L. Weisbord, 'How to Design Flexure Hinges,' Machine Design, pp. 151-156, Nov., 1965
  16. 김인수, 이홍식, 송준엽, '이송자벌레로의 압전세라믹 작동기 응용,' 한국정밀공학회지, 제 18 권, 제 8 호, pp. 157-163, 2001
  17. Z. X. Wang, K. Jouaneh and D. Dornfield, 'Desige and characterization of a linear motion Piesoelectric microactuator,' IEEE Conf. Robotics and Automarion, pp. 1710-1715, 1989 https://doi.org/10.1109/ROBOT.1989.100222
  18. S. Sakuta, K. Okawa, K. Ueda, 'Experimental studies on ultra-precision positioning an inchworm movement method using fine and coarse positionings,' Int. J. Japan Soc. Prec Eng. 27, pp. 235-240, 1993