Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Dynamic Behavior Analysis of Reciprocating Compressor Pistons

왕복동형 압축기 피스톤의 동적 거동 해석

  • 김태종 (부산대학교 기계공학부)
  • Published : 2002.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, a numerical analysis for the piston secondary dynamics of small refrigeration reciprocating compressors is performed. In general, the length of cylinder in this class of compressors is shortened to diminish the frictional losses of the piston-cylinder system. So, the contacting length between piston and cylinder wall is in variable with the rotating crank angle around the BDC of the reciprocating piston. In the problem formulation of the piston dynamics, the change in bearing length of the piston and all corresponding forces and moments are considered in order to determine the piston trajectory, velocity and acceleration at each step. A Newton-Raphson procedure was employed in solving the secondary dynamic equations of the piston. The developed computer program can be used to calculate the entire piston trajectory and the hydrodynamic force and moment as functions of crank angle under compressor running conditions. The results explored the effects of the radial clearance, lubricant viscosity, length of the cylinder wall, and pin location on the stability of the piston.

Keywords

References

  1. Li, D. F., Rohde, S. M. and Ezzat, H. A., 1983, "An Automotive Piston Lubrication Model," ASLE Transactions, Vol. 26, No. 2, pp. 151-160. https://doi.org/10.1080/05698198308981489
  2. Zhu, D., Cheng, H. S., Arai, T. and Hamai, K., 1992, "A Numerical Analysis for Piston Skirts in Mixed Lubrication Part 1: Basic Modeling," Journal of Tribology, Vol. 114, pp. 553-562. https://doi.org/10.1115/1.2920917
  3. Zhu, D, Hu, Y. Z., Cheng, H. S., Arai, T. and Hamai, K., 1993, "A Numerical Analysis for Piston Skirts in Mixed Lubrication Part 2: Deformation Consideration," Journal of Tribology, Vol. 115, pp. 125-133. https://doi.org/10.1115/1.2920965
  4. Gommed, K. and Etsion, I., 1993, "Dynamic Analysis of Gas Lubricated Reciprocating Ringless Piston-basic Modeling," Trans ASME, Journal of Tribology, Vol. 115, pp. 207-213. https://doi.org/10.1115/1.2920993
  5. Gommed, K. and Etsion, I., 1994, "Parametric Study of the Dynamic Performance of Gas Lubricated Ring-less Piston," Trans ASME, Journal of Tribology, Vol. 116, pp. 63-69. https://doi.org/10.1115/1.2927047
  6. Etsion, I. and Gommed, K., 1995, "Improved Design with Non-cylindrical Profile of Gas Lubricated Ringless Piston," Trans ASME, Journal of Tribology, Vol. 117, pp. 143-147. https://doi.org/10.1115/1.2830590
  7. Nakada, T., Yamamoto, A. and Abe, T., 1997, "A Numerical Approach for Piston Secondary Motion Analysis and Its Application to the Piston Related Noise," SAE paper No. 972043.
  8. 조성호, 안상태, 김양한, 2000, "피스톤 슬랩 충격력 예측을 위한 충돌점 모델," 한국소음진동공학회지, 제 10 권 제 3 호, pp. 474-479.
  9. Prata, A. T., Fernando Julio R. S. and Fagotti, F., 2000, "Dynamic Analysis of Piston Secondary Motion for Small Reciprocating Compressor," Trans ASME, Journal of Tribology, Vol. 122, pp. 752-760. https://doi.org/10.1115/1.1314603
  10. 김태종, 2001, "가변속 왕복동형 압축기 크랭크축-베어링계의 동적 거동 해석," 한국윤활학회지, 제 17 권 제 6 호, pp. 426-434.

Cited by

  1. Dynamic Analysis of the Small Reciprocating Compressors Considering Viscous Frictional Force of a Piston vol.12, pp.11, 2002, https://doi.org/10.5050/KSNVN.2002.12.11.904
  2. Analysis and Estimation of Vibration Characteristics of a Reciprocal Compressor with Variable Rotating Speed vol.26, pp.3, 2016, https://doi.org/10.5050/KSNVE.2016.26.3.290
  3. Optimization of the Shape of Loop-pipe in a Reciprocating Compressor Using Genetic Algorithm vol.26, pp.4, 2016, https://doi.org/10.5050/KSNVE.2016.26.4.398