Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Backlash Estimation of a Seeker Gimbal with Two-Stage Gear Reducers

2 단 기어 감속기를 갖는 탐색기 짐발의 백래시 추정

  • 백주현 (LG Innotek연구소 연구 7그룹) ;
  • 홍성민 (LG Innotek연구소 연구 7그룹) ;
  • 곽윤근 (한국과학기술원 기계공학과) ;
  • 김수현 (한국과학기술원 기계공학과)
  • Published : 2002.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

A unique technique to estimate the magnitude or contribution ratio of each stage backlash in a system with a two-stage gear reducer is proposed. The concept to estimate the magnitude or contribution ratio of each stage backlash is based on the change of frequency response characteristic, in particular, the change of anti-resonant frequency and resonant frequency, due to the change of each stage backlash magnitude, even though the total backlash magnitude of a system with a two-stage gear reducer is constant. The validity of the technique is verified in a seeker gimbal and satisfactory results are obtained. It is thought that the diagnosis and maintenance of the manufacturing machines and systems with two-stage gear reducers will become more efficient and economical by virtue of the proposed technique.

Keywords

References

  1. Dagalakis, N. G. and Myers, D. R., 1985, 'A Technique for the Detection of Robot Joint Gear Tightness,' Journal of Robotic Systems, Vol. 2, No.4, pp.414-423
  2. Stein, J. L. and Wang, C. H., 1998, 'Estimation of Gear Backlash: Theory and Simulation,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 74-82 https://doi.org/10.1115/1.2801324
  3. Sakar, N., Ellis, R. E. and Moore, T. N., 1997, 'Backlash Detection in Geared Mechanisms: Modeling Simulation, and Experimentation,' Mechanical Systems and Signal Processing, Vol. 11, No.3, pp. 391-408 https://doi.org/10.1006/mssp.1996.0082
  4. Pan, M. C., Brussel, H. V., Sas , P. and Verbeure, B., 1998, 'Fault Diagnosis of Joint Backlash,' ASME Journal of Vibration and Acoustics, Vol. 120, pp, 13-24 https://doi.org/10.1115/1.2893797
  5. Baek, J. H., Hong, S. M., Yang, T. S., Kim, S. H., .Kwak, Y. K., 2002, 'Frequency Response Characteristics of Two-Staged Gear Reduction Servo System according to the Backlash Contribution Ratio Variation of Each Gear Reduction Stage,' Journal of the Korean Society of Precision Engineering Vol. 19, No.5, pp. 103-109
  6. Baek, J. H., Hong, S. M., Yang, T. S., Kim, S. H., Kwak, Y. K., 2002, 'A Study on the Bandwidth of Gear Reduction Servo System According to Backlash and Motor Supplied Voltage,' Journal of the Korean Society of Precision Engineering, Vol. 19, No.6, pp. 119-127
  7. Chubb, B. A., 1967, Modern Analytical Design of Instrument Servomechanisms, Addison-Wesley Publishing Company, Massachusetts, USA
  8. Clifford, M., 1990, Modern Electronic Motors, Prentice Hall
  9. Nordin, M., Galic, J. and Gutman, P.O., 1997, 'New Models for Backlash and Gear Play,' International Journal of Adaptive Control and Signal Processing, Vol. 11, pp. 49-63 https://doi.org/10.1002/(SICI)1099-1115(199702)11:1<49::AID-ACS394>3.0.CO;2-X
  10. Dhaouadi, R., Kubo, K. and Tobise, M., 1993, 'Analysis and Compensation of Speed Drive Systems with Torsional Loads,' IEEE International Workshop on Advanced Motion Control, Yokohama, Japan, pp. 271-277 https://doi.org/10.1109/PCCON.1993.264212
  11. Bigley, W. J., 1993, 'Wideband Base Motion Isolation Control via the State Equalization Technique,' Optical Engineering, Vol. 32, No. 11, pp. 2805-2811 https://doi.org/10.1117/12.148097
  12. Meirovitch, L., 1997, Principles and Techniques of Vibrations, Prentice-Hall, Upper Saddle River, NJ

Cited by

  1. Torque Disturbance Analysis of Missile Hatch System by Spline Backlash vol.38, pp.1, 2014, https://doi.org/10.3795/KSME-A.2014.38.1.089