Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Prediction of Error due to Eccentricity of Hole in Hole-Drilling Method Using Neural Network

  • Kim, Cheol (Department of Mechanical Design, Sungkyunkwan University) ;
  • Yang, Won-Ho (School of Mechanical Engineering, Sungkyunkwan University)
  • Published : 2002.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

The measurement of residual stresses by the hole-drilling method has been used to evaluate residual stresses in structural members. In this method, eccentricity can usually occur between the hole center and rosette gage center. In this study, we obtained the magnitude of the error due to eccentricity of a hole through the finite element analysis. To predict the magnitude of the error due to eccentricity of a hole in the biaxial residual stress field, it could be learned through the back propagation neural network. The prediction results of the error using the trained neural network showed good agreement with FE analyzed results.

Keywords

References

  1. Ajovalasit, A., 1979, 'Measurement of Residual Stresses by the Hole-drilling Method;Influence of Hole Eccentricity,' Journal of Strain Analysis, Vol. 14, No. 4, pp. 171-178 https://doi.org/10.1243/03093247V144171
  2. ASTM Standard E837-99, Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
  3. Cho S.S. and Joo W.S., 2000, 'A Study on Fatigue Crack Growth and Life Modelling using Backpropagation Neural Network', Transactions of the KSME, Vol. 24, No. 3, pp. 634-644 (in Korean)
  4. Fausett, L., 1994, Fundamentals of Neural Net-work: Architectures, Algorithms and Applications, Prentice Hall, pp. 3-37
  5. Flaman, M.T. and Herring, J.A., 1986, 'Ultra-high-speed Center-hole Technique for Difficult Machining Materials,' Experimental Technique, Vol. 10, pp. 34-35
  6. Inamdar, M.V., Data, P.P. and Desai, U.B., 2000, 'Studies on the Preduction of Springback in Air Vee Bending of Metallic Sheets Using an Artificial Neural Network,' Journal of Materials Processing Technology, Vol. 108, pp. 45-54 https://doi.org/10.1016/S0924-0136(00)00588-4
  7. Kim, C., Seok, C.S. and Yang, W.H., 2000, 'Influence of the Hole Eccentricity in Residual Stresses Measurement by the Hole-drilling Method,' Transactions of the KSME, Vol. 24, No. 8, pp. 2059-2064 (in Korean)
  8. Mathar, J., 1934, 'Determination of Initial Stresses by Measuring the Deformation Around Drilled Holes', Trans. ASME, Iron & Steel, Vol. 56, pp. 249-254
  9. Rumelhart, D.E., Hinton, G.E. and Williams, R.J., 1986, 'Learning Internal Representations by Error Propagation:in Parallel Distributed Processing,' The MIT Press, Vol. 1, pp. 675-695
  10. Schajer, G.S. and Tootonian, M., 1997, 'A New Rosette Design for More Reliable Hole-drilling Residual Stress Measurements,' Experimental Mechanics, pp. 299-306 https://doi.org/10.1007/BF02317422
  11. Timoschenko, S.P. and Goodier, J.N., 1970, Theory of Elasticity, 3rd ed., McGraw-Hill, pp. 90-97
  12. Tootoonian, M. and Schajer, G.S., 1995, 'Enhanced Sensitivity Residual-stress Measurements Using Taper-hole Drilling,' pp. 124-12 https://doi.org/10.1007/BF02326469