The Combustion Gases Toxicity Evaluation of Plastics Material by Colorimetric Gas Detector Tubes

가스검지관법에 의한 플라스틱재료의 연소가스 독성평가

  • 박영근 ((사)한국화재보험협회 부설 방재시험연구원) ;
  • 김동일 ((사)한국화재보험협회 부설 방재시험연구원) ;
  • 현성호 (경민대학 소방과학과)
  • Published : 2002.12.01

Abstract

In this paper, we had analyzed comsbustion gases using a GASTEC colorimetric gas detector tube according to the method of NES 713 in order to combustion gases toxicity evaluation for beads polystyrene foam, extruded polystyrene foam, rigid polyurethane foam, flexible polyurethane foam, flexible polyvinyl chloride pipe, vinyl floor cover, polyethyelene foam(flame retardant untreated) and polyethyelene foam (flame retardant treated) of plastics material. As results of gas analyses by using this method, comsbustion gases producted from small specimens of plastics material had reached fatal to man at 30 minutes exposure time that had possesed toxicity index of more than 1. Toxicity indexes of each specimen were estimated range of 4.3∼179.2, flexible polyvinyl chloride showed the hightest toxicity index at 179.2, and beads polystyrene foams showed the lowest toxicity index at 4.3.

본 연구는 플라스틱재료 중 비드발포폴리스티렌폼, 압출발포폴리스티렌폼, 연질폴리우레탄폼, 경질폴리우레탄폼, 경질PVC파이프, 비닐장판, 폴리에틸렌폰(비난연), 폴리에틸렌폼(난연)를 대상으로 연소가스 독성평가를 위하여 NES 713 방법에 따라 발생되는 연소가스를 가스텍(GASTEC) 가스검지관을 이용하여 조사하였다. 연구결과 플라스틱재료의 연소시 발생되는 연소가스에 인간이 30분 동안 노출될 경우 사망에 이르는 독성지수 1 이상을 갖고 있었으며, 각 실험체의 독성지수 결과는 4.3∼179.2로 나타났으며 경질 PVC파이프가 179.2로 가장 높았다.

Keywords

References

  1. '95화재통계년보', 내무부소방국, p37(1996)
  2. '소방백서', 소방청편, pp46-50(1998)
  3. 'NFPA analysis of data from U.S. death certificates coded', NFPA, E890-E899(1995)
  4. 윤명오, '화성씨랜드 화재문제 및 대책', 한국화재 . 소방논문지. Vol. 12, No.4, p58(1999)
  5. NES 713, 'Determination of the toxicity index of the products of combustion from small speciments of materials', Issue 03(1985)
  6. DIN 53436, 'Generation of thermal products materials in air and their toxicological evaluation', DIN(1981)
  7. Gordon E. HartzeIl, 'Advances in Combustion Toxicology', Vol. 3, Technomic Publishing Co., Inc., PA, pp.8-18(1989)
  8. NF X 70-100, 'Fire tests- Analysis of combustion and pyrolysis gases-Tube furnace method', AFNOR (1986)
  9. ISO TR 9122, 'Toxicity testing of fire effluents', ISO(1989)
  10. BSI DD 180, 'Draft for Development Guide for the assessment of toxic hazards in fire buildings and transport', BSI(1989)
  11. IMO MSC 61.(67), 'Adoption of the international code for application of fire test procedures, Part 2. Somke and toxicity test', IMO(l996)
  12. Ejji Yanai, '고분자재료의 연소생성가스 및 그 독성', 火災, Vol. 47, No.6, p6(1997)
  13. IEC 811-1-3, 'Insulation and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 3: Methods for determining the density - Water absorption tests - Shrinkage test', IEC(1993)