Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Introduction to Plastics Processing and Its Research Trend

플라스틱 성형법의 개요와 연구동향의 고찰

  • 류민영 (서울산업대학교 금형설계학과)
  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Overview of plastics processing is described and the research trend of the processing is also noted. The main manufacturing processes in the plastics industry are injection molding, blow molding, compression molding, transfer molding, extrusion and thermoforming. The principles of those processes have been discussed and molds for shaping operation have been mentioned. References for each process have also been presented.

Keywords

References

  1. Injection Molding I. Rubin
  2. 사출성형 금형형설계기술 조웅식
  3. Plastic Part Design for Injection Molding R. A. Malloy
  4. Polymer Processing J.-F. Agassant;P. Avenas;J. -Ph. Sergent;P. J. Carreau
  5. Materials Science of Polymers for Engineers T.A. Osswald;G. Menges
  6. Plastics Mold Engineering Handbook E. V. Buckleitner
  7. Injection Molding Handbook Donald V. Rosato;Dominick V. Rosato
  8. Extrusion dies for Plastics and Rubber W. Michaelil
  9. Rheology in Polymer Processing C. D. Han
  10. Principles of Polymer Engineering Rheology J. L. Whte
  11. Intern. Polym Proc. v.8 H. Potente;M. Hansen https://doi.org/10.3139/217.930345
  12. International Communication in Heat and Mass Transfer v.22 S. C. Chen;N. T. Cheng;K. S. Hsu https://doi.org/10.1016/0735-1933(95)00023-R
  13. Ind. Eng. Chem. Res. v.34 Shia C. Chen;Ke S. Hsu;Jeng s. Huang https://doi.org/10.1021/ie00040a048
  14. Adv. Polym. Tech. v.14 S. Y. Yang;S. J. Liou https://doi.org/10.1002/adv.1995.060140303
  15. Adv. Polym. Tech. v.14 L. S. Turang https://doi.org/10.1002/adv.1995.060140101
  16. Polym. Eng. Sci. v.36 H. Potente;E. Moritzer;C. H. Obermann https://doi.org/10.1002/pen.10613
  17. Polym. Proc. v.3 D. M. Gao;K. T. Nguyen;A Garcia-Rejon;G. Salloum
  18. Polym. Proc. v.3 G. A. A. V. Haagh;H. Zuidema;F. N.van de Vosse;G. W. M. Peters;H. E. H. Meijer
  19. Polym. Eng. Sci. v.38 Shia-Chung Chen;Sheng-Yan Hu;Jeng-Sheng Huang https://doi.org/10.1002/pen.10276
  20. Adv. Polym. Tech. v.9 W. Michaeli;G. Menges https://doi.org/10.1002/adv.1989.060090108
  21. ANTEC S. C. Chen;K. F. Hsu;K. S. Hsu
  22. Adv. Polym. Tech. v.12 K. Himasekhar;L. S. Turing;V. W. Wang;H. H. Chang;K. K. Wang https://doi.org/10.1002/adv.1993.060120302
  23. J. Eng. Mater. Tech. v.115 L. S. Turng;V. W. Wang;K. K. Wang https://doi.org/10.1115/1.2902156
  24. Polym. Proc. v.3 W. F. Zoetelief;G. W. M. Peters;H. E. H. Meijer
  25. Adv. Polym. Tech. v.18 S. Y. Yang;P. T. Chu https://doi.org/10.1002/(SICI)1098-2329(199921)18:1<11::AID-ADV2>3.0.CO;2-K
  26. Adv. Polym. Tech. v.20 Nan Shing Ong;H. L. Lee;M. A. Parvez https://doi.org/10.1002/adv.10000
  27. 소성가공학회, 춘계학술대회 강신일
  28. 대한기계학회 v.24 문종신;신효철
  29. polymer(korea) v.25 조태식;정원용
  30. Adv. Polym. Tech. v.14 S. Y. Yang;M. Z. Ke https://doi.org/10.1002/adv.1995.060140102
  31. Adv. Polym. Tech. v.15 S. Y. Yang;I. Nien https://doi.org/10.1002/(SICI)1098-2329(199623)15:3<205::AID-ADV2>3.0.CO;2-Y
  32. Intern. Polym. Proc. v.15 W. B. Yong https://doi.org/10.3139/217.1618
  33. Adv. Polym. Tech. v.15 S. Y. Tang;L. Nien https://doi.org/10.1002/(SICI)1098-2329(199623)15:3<205::AID-ADV2>3.0.CO;2-Y
  34. Adv. Polym. Tech. v.17 S. Y. Yang;Y.C. Chen https://doi.org/10.1002/(SICI)1098-2329(199824)17:4<353::AID-ADV6>3.0.CO;2-Q
  35. Adv. Polym. Tech. v.19 M. Evstatiev;S. Fakirov;G. Bechtold;K. Friedrich https://doi.org/10.1002/1098-2329(200024)19:4<249::AID-ADV2>3.0.CO;2-R
  36. Adv. Polym. Tech. v.21 Shia-Chung Chen;Yung-Cheng Chen;Hsin-Shu Peng;Lei-Ti Huang https://doi.org/10.1002/adv.10024
  37. 소성가공학회, 춘계학술대회 김종성
  38. 대학기계학회 v.22 김일환;박성진;정성택;권태헌
  39. Polym. Eng. Sci. v.30 I. Pandelidis;Q. Zou https://doi.org/10.1002/pen.760301502
  40. Polym. Eng. Sci. v.30 I. Pandelidis;Q. Zou https://doi.org/10.1002/pen.760301503
  41. Polym. Eng. Sci. v.31 N. Dontula;P. C. Sukanek;H. Devanathan;G. A. Campbell https://doi.org/10.1002/pen.760312308
  42. Polym. Eng. Sci. v.31 C. P. Chiu;M. C. Shih;J. H. Wei https://doi.org/10.1002/pen.760311908
  43. Polym. Eng. Sci. v.32 C. J. Yu;J. E. Sunderland https://doi.org/10.1002/pen.760320305
  44. Polym. Eng. Sci. v.33 M. Yoshii;H. Kuramoto https://doi.org/10.1002/pen.760331905
  45. ANTEC D. M. Gao;K. T. Nguyen;P. Girard;G. Salloum
  46. Adv. Polym. Tech. v.13 K. Amellal;C. Tzoganakis;A. Penlidis;G. L. Rempel https://doi.org/10.1002/adv.1994.060130407
  47. ANTEC P. R. Oehler
  48. ANTEC A. J. Poslinski;P. R. Oehler
  49. ANTEC L. Q. Tang;K. Pochiraju;C. Chassapis;S. Manoochehri
  50. ANTEC B. A. Salamon;R. J. Donald
  51. Intern. Polym. Proc. v.11 M. C. O. Chang https://doi.org/10.3139/217.960076
  52. Intern. Polym. Proc. v.12 G. Batch https://doi.org/10.3139/217.970257
  53. Polym. Compos v.19 R. Singh;F. Chen;F. R. Jones https://doi.org/10.1002/pc.10073
  54. Intern. Polym. Proc. v.14 S. S.L. Wen;C. K. Jen;K. T. Nguyen
  55. Polym. Eng. Sci. v.13 J. L. Berger;C. G. Gogos https://doi.org/10.1002/pen.760130205
  56. Polym. Eng. Sci. v.14 P. C. WU;C. F. Huang;C. G. Gogos https://doi.org/10.1002/pen.760140311
  57. Polym. Eng. Sci. v.30 C. C. Lee https://doi.org/10.1002/pen.760302409
  58. Polym. Eng. Sci. v.30 M. Gupta;T. H. Kwon https://doi.org/10.1002/pen.760302203
  59. Polym. Eng. Sci. v.30 H. F. Nied;C. A. Taylor;H. G. Delorenzi https://doi.org/10.1002/pen.760302009
  60. Polym. Eng. Sci. v.31 H. H. Chiang;C. A. Hieber;K. K. Wang https://doi.org/10.1002/pen.760310210
  61. Polym. Eng. Sci. v.31 H. H. Chiang;C. A. Hieber;K. K. Wang https://doi.org/10.1002/pen.760310211
  62. Intern. Polym. Proc. v.6 D. Fauchon;H. H. Dannelongue;P. A. Tanguy https://doi.org/10.3139/217.910013
  63. Polym. Eng. Sci. v.32 H. H. D. Frahan;V. Verleye;F. Dupret;M. J. Crochet https://doi.org/10.1002/pen.760320405
  64. Polym. Eng. Sci. v.33 I. Karidio;J. J. C. Picot https://doi.org/10.1002/pen.760330305
  65. ANTEC D. M. Gao;K. T. Nguyyin;P. Girard;G. Salloum
  66. TEC S. Cha;F. S. Lai
  67. ANTEC C. Friedl;M. P. Lid
  68. Intern. Polym. Proc. v.12 G. Titomanlio;V. Speranza;V. Brucato https://doi.org/10.3139/217.970045
  69. Polym. Eng. Sci. v.37 M. Buchmann;R. Theriault;T. A. Osswald https://doi.org/10.1002/pen.11710
  70. Polym. Eng. Sci. v.37 C. Likakou https://doi.org/10.1002/pen.11696
  71. Polym. Eng. Sci. v.14 S. Y. Hobbs https://doi.org/10.1002/pen.760140906
  72. Polym. Eng. Sci. v.14 W. K. Krueger;Zehev Tadmor
  73. Polym. Eng. Sci. v.21 S. C. Malguarmera;A. M. anisali https://doi.org/10.1002/pen.760211004
  74. Polym. Eng. Sci. v.21 S. C. Malguarnera;A. I. Manisali;D. C. Riggs https://doi.org/10.1002/pen.760211706
  75. Polym. Eng. Sci. v.23 R. M. Criens;H. G. Mosle https://doi.org/10.1002/pen.760231011
  76. Polym. Eng. Sci. v.26 Sang-Gook Kim;Nam P. Suh https://doi.org/10.1002/pen.760261707
  77. J. Mater Sci. v.25 D. Singh;H. G. Mosle;M. Kunz;W. Wenig https://doi.org/10.1007/BF01129928
  78. Polym. Eng. Sci. v.30 K. Tomari;S. Tonogal;T. Harada https://doi.org/10.1002/pen.760301508
  79. Polym. Eng. Sci. v.31 B. Fisa;M. Rahmani https://doi.org/10.1002/pen.760311807
  80. Polym. Eng. Sci. v.33 K. Tomari;T. Harada https://doi.org/10.1002/pen.760331509
  81. Polym. Eng. Sci. v.34 B. Brahimi;A. Ait-Kadi;A. Ajji https://doi.org/10.1002/pen.760341506
  82. J. Appl. Polym. Sci. v.57 S. Fillahi;B. Fisa;B. D. Favis https://doi.org/10.1002/app.1995.070571109
  83. Adv. Polym. Tech. v.14 Kiyotaka Tomari;Hiroki Takashima;Hiroyuki Hamada https://doi.org/10.1002/adv.1995.060140103
  84. Adv. Polym. Tech. v.14 N. Mekhilef;A. Ait-Kadi;A. Ajji https://doi.org/10.1002/adv.1995.060140405
  85. ANTEC Garrett P. Gardner;Robert. A. Malloy
  86. J. Mater. Sci. v.31 W. Wenig;C. Stolzenberger https://doi.org/10.1007/BF01152966
  87. 한국고분자학회, 추계학술대회 고득현;이성우;김현경;모정혁;류민형
  88. Polym. Eng. Sci. v.37 R. Selden https://doi.org/10.1002/pen.11663
  89. The Korea Journal of Rheology v.9 이시춘;김형수;홍인권;윤용수 https://doi.org/10.1002/pen.11665
  90. J. Mater. Sci. v.33 A. Chrysostonou;S. Hashemi https://doi.org/10.1023/A:1004365323620
  91. J. Mater. Sci. v.33 A. Chrysostonou;S. Hashemi https://doi.org/10.1023/A:1004365323620
  92. Polym. Plast. Tech. Eng. v.37 J. Rioux;D. Yao;B. H. Kim https://doi.org/10.1023/A:1004365323620
  93. Polym. Eng. Sci. v.38 D. F. Mielewski;D. R. Bauer;P. J. Schernitz;H. van oene https://doi.org/10.1080/03602559808006934
  94. ANTEC N. Shah;S. M. Carthy;D. Colford https://doi.org/10.1002/pen.10371
  95. ANTEC W. C. Bushko;V. K. Stokes;A. J. Poslinski
  96. ANTEC A. J. Poslinski;W. C. Bushko;V. K. Stokes;L. R. Cosma
  97. ANTEC W. C. Bushko;V. K. Stokes
  98. Intern. Polym. Proc. v.12 S. Han;K. K. Wang https://doi.org/10.3139/217.970228
  99. Intern. Polym. Proc. v.13 K. M. B. Janses;D. J. van Dijk;E. V. Burgers https://doi.org/10.3139/217.980099
  100. 대한기계학회 v.19 유중학;김희송
  101. 한국고분자학회, 추계학술대회 김현진;김정화;김화영;모정혁;류민영
  102. Adv. Polym. Tech. v.21 Shia-Chung Chen;Yung-Cheng Chen;Hsin-Shu Peng;Lei-Ti Huang https://doi.org/10.1002/adv.10024
  103. 한국고분자학회, 추계학술대회 v.10 신희철;양승관;류민영 https://doi.org/10.1002/adv.10024
  104. 한국소성가공학회 금형가공심포지움 류민영
  105. 폴리머 v.24 류민영;신희철;배유리
  106. Polym. Eng. Sci. v.16 K. Oda;J. L. White;And EClark https://doi.org/10.1002/pen.760160811
  107. Polym. Eng. Sci. v.19 J. L. White https://doi.org/10.1002/pen.760160811
  108. ANTEC H. Hamada;H. Tsunasawa https://doi.org/10.1002/pen.760191504
  109. Polym. Eng. Sci. v.32 S. Y. Hobbs
  110. J. Appl. Phys. v.22 R. G. Treuting;W. T. Read;JR.
  111. J. Appl. Phys. v.25 R. D. Andrews https://doi.org/10.1063/1.1699913
  112. J. Appl. Phys. v.25 E. F. Gurnee https://doi.org/10.1063/1.1721534
  113. ISA Trans. A. J. Bush;F. J. Kromer https://doi.org/10.1063/1.1721535
  114. J. Mater. Sci v.14 L. D. Coxon;J. R. White https://doi.org/10.1007/BF00561295
  115. Acta v.19 A. I. Isayev;C. A. Hieber;Rheol https://doi.org/10.1007/BF00561295
  116. J. Appl. Polym. Sci. v.25 J. R. Saffell;A. H. Windle https://doi.org/10.1002/app.1980.070250614
  117. Polym. Eng. Sci. v.21 J. G. Williams;J. M. Hodgkinson;A. Gray https://doi.org/10.1002/app.1980.070250614
  118. Polym. Eng. Sci. v.21 L. K. Agbezuge https://doi.org/10.1002/pen.760211304
  119. Polym. Eng. Sci. v.21 J. F. Mandill;K. L. Smith;D. D. Huang https://doi.org/10.1002/pen.760210904
  120. J. Rheol v.27 J. Greener;G. H. Pearson https://doi.org/10.1002/pen.760211711
  121. Polym. Eng. Sci. v.23 A. I. Isayev https://doi.org/10.1122/1.549701
  122. J. Appl. Polym. Sci. v.28 C. J. Wust, JR;D. C. Bogue https://doi.org/10.1002/pen.760230507
  123. Polym. Eng. Sci. v.24 M. Thompson;J. R. White https://doi.org/10.1002/app.1983.070280609
  124. J. Appl. Polym. Sci. v.31 S. Lee;J. D. L. Vega;D. C. Bogue https://doi.org/10.1002/pen.760240402
  125. Polym. Eng. Sci. v.26 M. R. kamal;P. G. Lafleur https://doi.org/10.1002/app.1986.070310832
  126. Polym. Eng. Sci. v.26 J. F. Stevenson;L. J. Lee;R. M. Griffith https://doi.org/10.1002/pen.760260115
  127. Canadian Journal of Phys. v.45 J. C. M. Li https://doi.org/10.1002/pen.760260308
  128. Polym. Eng. Sci. v.14 L. J. Broutman;S. M. Krishnakumer https://doi.org/10.1002/pen.760140402
  129. Polym. Eng. Sci. v.16 L. J. Broutman;S. M. Krishnakumar https://doi.org/10.1002/pen.760140402
  130. Polym. Eng. Sci. v.16 P. So;L. J. Broutman https://doi.org/10.1002/pen.760160203
  131. Acta v.16 H. J. Kriegl https://doi.org/10.1002/pen.760161202
  132. Polym. Eng. Sci. v.17 L. Hoare;D. Hull https://doi.org/10.1007/BF01534086
  133. Rheol. Acta v.17 W. Dietz;J. L. White https://doi.org/10.1002/pen.760170309
  134. Polym. Eng. Sci. v.19 A Siegmann;M. Narkis;N. Rosenzweig https://doi.org/10.1007/BF01522040
  135. Polym. Eng. Rev. v.1 L. Schmidt;J. Opfermann;G. Menges https://doi.org/10.1002/pen.760190310
  136. Polym. Eng. Rev. v.1 J. L. White;A. Agrawal
  137. Polym. Eng. Sci. v.22 A. Siegmann;A. Buchman;S. Kenig https://doi.org/10.1002/pen.760220107
  138. Polym. Eng. Sci. v.22 A. I. Isayev;D. L. Crouthamel https://doi.org/10.1002/pen.760220107
  139. J. Marel. Sci. v.20 J. R. White
  140. Polym. Eng. Sci. v.26 P. G. Lafleur;M. R. Kamal https://doi.org/10.1002/pen.760260114
  141. Polym. Eng. Sci. v.26 R. K. Mittal;V. Rashmi https://doi.org/10.1002/pen.760260114
  142. Modern Plastics v.27 G. D. Gilmore;R. S. Spencer
  143. Modern Plastics v.27 R. I. Dunlap;F. J. Pokigo;S. E. Glick
  144. Modern Plastics v.38 R. L. Ballman;H. L. Toor
  145. SPE J v.17 F. J. Rielly;W. L. Price
  146. SPE J. v.17 C. T. Hathaway
  147. Modern Plastics v.39 Joy L. Vermillion
  148. British Plastics Gnter Peilstcker
  149. Modern Plastics v.40 Lowell S. Thomas;Kenneth J. Cleereman
  150. Modern Plastics v.41 L. I. Johnson
  151. SPE J v.22 James K. Harkleroad
  152. SPE J v.23 Edward S. Clark
  153. Modern Plastics v.23 Robert Rager
  154. Frankfurt a. M v.60 Bodo Carlowitz;Norbert Kallus
  155. SPE J v.28 Lowell S. Thomas;Kenneth J. Cleoroman
  156. SPE J v.28 Lowell S. Thomas;Kenneth J. Cleoroman
  157. J. Mater. Sci. v.23 E. Morales;J. R. White https://doi.org/10.1007/BF00540503
  158. J. Appl. Polym. Sci. v.50 Erik Andreassen;Ole Jan Myhre https://doi.org/10.1002/app.1993.070501005
  159. 금형기술개발과 CAE해석 적용 세미나 류민영;조성환 https://doi.org/10.1007/BF00540503
  160. Polym. Eng. Sci. v.21 A. Siegmann;A. Buchman;S. Kenig https://doi.org/10.1002/app.1993.070501005
  161. Polym. Eng. Sci. v.31 M. Rezayat;R. O. Stafford https://doi.org/10.1002/pen.760310602
  162. Polym. Eng. Sci. v.40 H. Wang;K. K. Kabanemi;G. Salloum https://doi.org/10.1002/pen.760211503
  163. Polym. Eng. Sci. v.31 T. Matsuoka;J. I. Takabatake;A. Koiwai;Y. Inoue;S. Yamamoto;H. Takahashi https://doi.org/10.1002/pen.760310602
  164. Intern. Polym. Proc. v.13 K. M. B. Jansen;D. J. van Dijk;K. P. keizer https://doi.org/10.1002/pen.11212
  165. Polym. Eng. Sci. v.38 E. J. Fahy https://doi.org/10.1002/pen.760311408
  166. Adv. Polym. Tech. v.20 Yuanxian Gu;haimei Li;Changyu Shen https://doi.org/10.1002/1098-2329(200121)20:1<14::AID-ADV1001>3.0.CO;2-S
  167. 대한기계학회 v.24 정성택;김진곤 https://doi.org/10.1002/pen.10275
  168. Polym. Proc. D. H. Morton-Jones https://doi.org/10.1002/1098-2329(200121)20:1<14::AID-ADV1001>3.0.CO;2-S
  169. J. Materials Sci. v.3 C. Bridle;A. Buckley;J. Scanlan https://doi.org/10.1007/BF00757909
  170. J. Polym. Sci. v.6 J. H. Dumeleton https://doi.org/10.1002/pol.1968.110061107
  171. Polym. Eng. Sci. v.15 K. Thiruvillakkat;G. K. Mahajan https://doi.org/10.1007/BF00757909
  172. Polym. Eng. Sci. v.21 C. Bonnebat;G. Roullet;A. J. de Vries https://doi.org/10.1002/pol.1968.110061107
  173. Polym. Eng. Sci. v.22 R. Y. Wu;Z. H. Stachurski https://doi.org/10.1002/pen.760150407
  174. Polym. Eng. Sci. v.23 L. Brwin;M. A. Pollock;H. Gonzalez https://doi.org/10.1002/pen.760210403
  175. Polym. Eng. Sci. v.18 M. Cakmak;J. E. Spruiell;J. L. White https://doi.org/10.1002/pen.760220804
  176. Polym. Eng. Sci. v.24 M. Cakmak;J. E. Spruiell;J. L. White https://doi.org/10.1002/pen.760231507
  177. ANTEC J. Granata
  178. J. PLASTIC FILM & SEETING v.4 F. P. Gay https://doi.org/10.1002/pen.760241804
  179. Polym. J v.26 F. Rietsch, Eur.
  180. Polym. Eng. Sci. v.32 S. A. Jabarin https://doi.org/10.1177/875608798800400207
  181. ANTEC S. A. Jabarin;P. Chandran
  182. ANTEC A. Silberman;M. Omer;A. Ophir;S. Kenig https://doi.org/10.1002/pen.760321802
  183. ANTEC L. Martin;D. Stracovsky;D. Laroche;A. Bardetti;R. Ben-Yedder;R. Diraddo
  184. ANTEC C. S. Randall;David P. Prior
  185. Intern Polym. Proc. v.15 S. Wang;A. Makinouchi;M. okamoto;T. kotaka;M. Maeshima;N. Ibe;T. Nakagawa https://doi.org/10.3139/217.1582
  186. 한국소성공학회 v.10 주성택;김용환;류민영
  187. Inter. Polym. Proc. v.16 Min-Young Lyu;H. C. Kim;J. S. Lee https://doi.org/10.3139/217.1628
  188. 주성택, 김용환, 류민영, 2001 한국소성공학회, 10, p. 525.
  189. 한국소성가공학회 추계학술대회 v.10 김진환;오창석;홍성택;류민영
  190. 한국고분자학회 춘계학술대회 v.4 류민영;김학철;이재식;신희철
  191. 한국고분자학회 추계학술대회 v.10 김학철;이재식;신희철;류면영
  192. 한국고분자학회 춘계학술대회 v.4 신희철;김명욱;류민영;주성택;김용환
  193. 한국소성가공학회 추계학술대회 v.10 신희철;류민영;김용환
  194. ANTEC Min-Young Lyu;H. C. Kim;H. C. Shin;J. S. Lee;S. T. Joo;Y. W. Kim
  195. Inter. Polym. Proc. 류민영;김윤환
  196. J. Appl. Polym. Sci. 류민영
  197. Polymer Extrusion C. Rauwendaal
  198. Intern. Polym. Proc. v.10 Min-Young Lyu;James L. White https://doi.org/10.3139/217.950305
  199. Intern. Polym. Proc. v.11 Min-Young Lyu;James L. White https://doi.org/10.3139/217.960208
  200. Intern. Polym. Proc. v.12 Min-Young Lyu;James L. White https://doi.org/10.3139/217.970104
  201. Polym. Eng. Sci. v.37 Min-Young Lyu;James L. White https://doi.org/10.1002/pen.11705
  202. Polym. Eng. Sci. v.38 Min-Young Lyu;James L. White
  203. 고분자과학과 기술 v.9 류민영 https://doi.org/10.1002/pen.11705
  204. J. Polym. Plast Tech. Eng. v.37 Min-Young Lyu;James L. White https://doi.org/10.1002/pen.10307
  205. J. of Reinforced Plastic and Composites v.19 Min-Young Lyu;James L. White https://doi.org/10.1106/R104-1AND-PJV9-VJWM
  206. Intern. Polym. Proc. v.17 D.-S. Kwag;M.-Y. Lyu;W.-S. Kim https://doi.org/10.1080/03602559808006935
  207. Polym. Eng. Sci. v.36 P. HurezandP. A Tanguy https://doi.org/10.1106/R104-1AND-PJV9-VJWM
  208. D.-S. Kwag, M.-Y. Lyu, W.-S. Kim, 2002, Intern. Polym. Proc., 17, p. 95. https://doi.org/10.3139/217.1686
  209. Polym. Eng. Sci. v.33 P. HurezandP. A Tanguy https://doi.org/10.1002/pen.10450
  210. Polym. Eng. Sci. v.28 B. Yang;L. J. Lee https://doi.org/10.1002/pen.760281102
  211. Polym. Eng. Sci. v.28 B. Yang;L. J. Lee https://doi.org/10.1002/pen.760331506
  212. Polym. Eng. Sci. v.37 Jing-Pin Pan;Ping-Yao Wu;Ta-Jo Liu https://doi.org/10.1002/pen.760281102
  213. Vinyl Tech v.10 E. B. Rabinovitch;J. G. Quisenberry https://doi.org/10.1002/pen.760281103
  214. Polym. Eng. Sci. v.27 B. Yang;L. J. Lee https://doi.org/10.1002/pen.11728
  215. Polym. Eng. Sci. v.26 James F. Stevenson; L. J. Lee;Rrichard M. Griffith https://doi.org/10.1002/vnl.730100408
  216. Plastics World Chris Rauwendaal https://doi.org/10.1002/pen.760271408
  217. Adv. Polym. Tech. v.9 W. Michaeli;G. Menges https://doi.org/10.1002/pen.760260308
  218. Polym. Eng. Sci. v.34 F. Thibault;P. A. Tanguy
  219. Adv. polym. tech. v.20 L. Mascia;T. Schwarzbach https://doi.org/10.1002/adv.1989.060090108
  220. Polym. Eng. Sci. v.38 W. A. Gifford
  221. Polym. Eng. Sci. v.30 Michel A. Huneault;Pierre G. Lafleur;Pierre J. Carreau https://doi.org/10.1002/adv.1007
  222. Polym. Eng. Sci. v.40 Woei-Shyong Lee;Hsueh-Yu Ho https://doi.org/10.1002/pen.11236
  223. Plastics Engineering Michel A. Huneault;Pierre G. Lafleur;Pierre J. Carreau https://doi.org/10.1002/pen.760302309
  224. Polym. Eng. Sci. v.27 Bing Yang;L. James Lee https://doi.org/10.1002/pen.11236
  225. Appl. Polym. Symp. v.7 S. G. Turley
  226. Polym. Eng. Sci. v.18 Pawan K. Agarwal;Edward B. Bagley;Christopher T. Hill https://doi.org/10.1002/pen.760271409
  227. ANTEC C. S. Randall
  228. J. Polym. Mater. v.8 M. D. Migahed;H. R. Hafiz;A. M. Shaban;M. Ishra https://doi.org/10.1002/pen.760180408
  229. Polym. Eng. Sci v.37 Jin Kon Kimm;Ju Ho Song;S. T. Chung;T. H. Kwon https://doi.org/10.1002/pen.11665
  230. Modern Plastics v.27 J. A. Neumann

Cited by

  1. A Study on Gas-Assisted Plastic Injection Mould of Flat TV Front Cover vol.12, pp.8, 2003, https://doi.org/10.5228/KSPP.2003.12.8.738