Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Modeling Method of Slabs in RC Flat-Plate Structures Under Lateral loading

횡하중을 받는 RC 무량판 구조의 슬래브 모델링 기법

  • Published : 2002.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

To reasonably predict the behaviors for RC flat-plate structures, analysis model considering the flexural stiffness of slabs is required. FEMA 273 and ACI 318-99 refer to theoretical analysis models of two-way slab systems under lateral loading but the actual application method is not suggested. In this study, the modeling and application methods of the flat-plates using effective beam concept are suggested. The results of this study are as follows. 1) The effective beam width model suggested in this study is very useful to model flat-Plate structures subjected to seismic loading for three dimensional analysis 2) The result of analysis for idealized flat-plate example using the effective beam widths considering the effect of the slab crack is shown upper value for displacements. Whereas the model considering effective beam width coefficients only is shown upper value for unbalanced moments

철근콘크리트 무량판 구조의 내력 및 변위를 합리적으로 예측하기 위해서는 슬래브의 휨 강성을 고려한 해석모델이 필요하다. FEMA 273과 ACI 318-99에서는 횡 하중에 대한 슬래브의 해석모델들을 제시하고 있으나 실제적인 적용 방법론은 언급하고 있지 않다. 본 연구에서는 무량판 슬래브의 모델링 방법론을 정립하고 이를 내진설계에 어떻게 적용할 것인가에 대하여 연구하였다. 연구결과는 다음과 같다. 1) 무량판 구조의 3차원 해석시 슬래브의 휨 강성을 적절히 고려하기 위해서는 본 연구진이 제시하는 유효보폭 모델을 적용하는 것이 바람직하다. 2) 예제 무량판 건물 해석에서 슬래브의 균열효과를 고려한 유효보폭을 이용할 경우 해석결과는 횡변위에 대하여 상한값을 나타낸 반면 유효보폭 계수만을 고려한 모델은 접합부 불균형 모멘트에 대하여 상한값의 결과를 나타냈다.

Keywords

References

  1. ATC, "NEHRP Guidelines for the Seismic Rehabilitation of Buildings," FEMA Report 273, Applied Technology Council for the Building Seismic Safety Council, Washington, D. C, 1997.
  2. ACI Commite 318, "Building Code Requirements for Structural Concrete (ACI 318-99)," Portland Cement Association, 1999.
  3. Aalami, B., "Moment-Rotation Relation Between Column and Slab," ACI Structural Journal, Vol. 65, No. 5, May 1972, pp.263-269.
  4. Mehrain, M. and Aalami, B., "Rotational Stiffness of Concrete Slabs," ACI Structural Journal, September 1974, pp.429-435.
  5. Pecknold, D. A., "Slab Effective Width for Equivalent Frame Alalysis," ACI Structural Journal, April 1975, pp.135-137.
  6. Allen, F. H. and Darvall, P. LeP., "Lateral Load Equivalent Frame," ACI Structural Journal, July 1977, pp.294-299.
  7. Fraser, D. J., "Elastic Analysis of Laterally Loaded Frames," Journal of the Structural Engineering, Vol.109, No.6, June. 1983, pp.1479-1489. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:6(1479)
  8. Milija, N. P. and Steven M. P., "On the Computation of Slab Effective Widths," Journal of the Structural Engineering, Vol.111, No.2, Feb. 1985, pp.363-377. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:2(363)
  9. Hwang, S. J. and Moehle, J. P., "An Experimental Study of Flat-plate Structures Under Vertical and Lateral Loads," No. UCB/EERC-93/03, University of California, Berkeley, Feb, 1993.
  10. Fariborz, B., Rainer, E., and Mehrdad, F., "Moment Transfer and Slab Effective Widths in Laterally Loaded Edge Onnections," ACI Structural Journal, Sep.-Oct., 1991, pp.615-623.
  11. Luo, Y. H. and Durrani, A. J., "Equivalent Beam Model for Flat-Slab Buildings - Part I: Interior Connections," ACI Structural Journal, Jan-Feb, 1995, pp.115-124.
  12. Luo, Y. H. and Durrani, A. J., "Equivalent Beam Model for Flat-Slab Buildings - Part II: Exterior Connections," ACI Structural Journal, Mar-Apr, 1995, pp.250-257.
  13. 최정욱, 김철수, 송진규, 이수곤, "횡하중을 받는 Flat-Plate 구조의 유효보폭 계수," 대한건축학회 논문집 구조계, 제17권, 6호, 2001, pp.77-86.
  14. Choi, J. W., Kim, C. S., Song, J. G., and Lee, S. G., "Effective Beam Width Coefficients for Lateral Stiffness in Flat-Plate Structures," KCI Concrete Journal, Vol. 13, No. 2, July 2001, pp.49-57.
  15. 김철수, 최정욱, 송진규, 윤정배, 이수곤, "횡하중을 받는 벽-슬래브 접합부의 유효보폭 계수," 대한건축학회 학술발표논문집, 제21권, 2호, 2001, pp.27-30.
  16. 최정욱, 송진규, 윤정배, 이수곤, "횡하중을 받는 RC 무량판 구조의 골조해석 모델," 대한건축학회 논문집 구조계, 제18권, 3호, 2002, pp.37-46.
  17. Moehle, J. P. and Diebold, J. W., "Experimental Study of the Seismic Response of a Two Story Flat Plate Structure," Roport No. UCB/EERC-84/08, Earthquake Engineering Research Center, University of California, Berkeley, Aug. 1984.
  18. Pan, A. P. and Moehle, J. P., "Reinforced Concrete Flat Plates Under Lateral Loading : An Experimental Study Including Biaxial Effects," Report No. UCB/EERC-88/16, Earthquake Engineering Research Center, University of California at Berkeley, Oct. 1988.
  19. Hwang, S. J. and Moehle, J. P., "Vertical and Lateral Load Tests of Nine-Panel Flat-Plate Frame," ACI Structural Journal, Vol. 97, No. 1, Jan-Feb 2000, pp.193-203.
  20. "Uniform Building Code," International Conference of Building Officials, Whittier, California, 1997.
  21. 건축물 하중기준 및 해석, 대한건축학회, 2000.