Journal of the Korean Society of Fisheries and Ocean Technology (수산해양기술연구)

The Korean Society of Fisheries and Ocean Technology (한국수산해양기술학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis on Deformation and Stiffness of Frame Structure for Fishery using Finite Element Methods

유한 요소법을 이용한 어업용 프레임 구조물의 변형 및 강도 해석

  • Published : 2002.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

In order to evaluate the deformation and stiffness of frame structure for fishery, composed of unit platforms which made of two concentric high density polyethylene buoys fixed by clamps and belts and rubber hinge components, under wave, the structural analysis for the square type of the structure was carried out by using finite element methods. The accurate physical properties of rubber hinge components determined by material tests were an important parameter to evaluate more reliable structural stability for the structure. The idealization to beam element with equivalent stiffness and rubber element with linearity for rubber hinges was necessary for the modeling of rubber component which has hyper-elastic characteristics. In addition, it was shown that the structural response of the structure under wave was larger in the hogging condition than that of in the still water or in the sagging condition.

2개의 PE 부이가 클램프 및 벨트로 고정되고 그 위에 발판을 지지하기 위한 프레임 등으로 구성된 단위 틀이 외부 재질이 고무 성분인 힌지로연결된 어업용 프레임 구조물의 강도 및 변형을 해석하여 구조적 안정성을 평가하고자 유한 요소법을 이용하여 그것의 구조 해석을 수행하였으며, 해석에서 얻어진 결과는 다음과 같이 요약할 수있다. 1) 고무 힌지로 구성된 어업용 프레임 구조물의 구조적인 안정성을 해석하기 위해서는 힌지 부분을 정확하게 모델링하는 것이 중요하며, 특히 해석 결과는 모델링의 기법에 따라 다르게 나타났다. 2) 고무 힌지의 경우 먼저 재료 시험을 통해 그것의 정확한 불성치를 확보한 후 구조 해석을 수행해야 하며, 단순히 영 계수 E만을 인자로서 해석하는 경우 신뢰성이 있는 결과를 얻을 수 없다는 것을 확인하였다. 3) 초탄성 거동을 하는 고무는 대변형을 하지만 하중과 변형이 선형 관계를 유지하고 있으므로 영 계수 E 등의 물성치를 적절히 사용하면, 힌지를 단순하게 선형 문제로 이상화하여 구조해석을 수행할 수 있을 것으로 사료된다. 4) 동일한 조건에서 파랑 하중에 대한 어업용 프레임 구조물의 구조 응답은 Hogging 상태 즉, 파정이 그것의 중앙부에 오는 것이 정수 중이나 Sagging 상태인 경우보다 크게 나타났다.

Keywords

References

  1. Aarsnes, J. V., Rudi, H. and LOland, G.(1990) : Current forces on cage, net deflection, Engineering for Offshore Fish Farming, Thomas Telford, London, 137-152.
  2. Colbourne, D. B. and Allen, J. H.(2001): Observations on motions and loads in aquaculture cages from full scale and model scale measurements. aquacultural engineering 24, 129-148. https://doi.org/10.1016/S0144-8609(00)00069-8
  3. Fu, E. B., Sato, O., Nashimoto, K. and Yamamoto., K.(1989) : Fluid force on simplified models of aquaculture net cage. Nippon Suisan Gakkashi 55(7). 1211-1216 (in Japanese). https://doi.org/10.2331/suisan.55.1211
  4. Fu, E. B., Nashimoto, K., Yamamoto, K., Hiraishi, T. and Takagi, T.(1994): Model experiment examination of mooring method in aquaculture net cage. Bulletin of the Faculty of Fisheries, Hokkaido University 45(1). 9-18 (in Japanese).
  5. Fujita, S., Fukahori, K. and Nishinokubi, H. (1991) : Tension of the mooring ropes on the net cage model of raft type in regular waves. Nippon Suisan Gakkashi 57(12). 2229-2235 (in Japanese). https://doi.org/10.2331/suisan.57.2229
  6. Hideshima, Y.(1982): Fundamental study on mooring force of the aquacultural wire netting cage (1). Fisheries Engineering 19(1). 1-6 (in Japanese).
  7. Kim, T. H.(2000) : Hydrodynamic characteristics of frame structures for fishery, Ph. D. thesis, Department of Ocean Engineering, Pukyong National University, 67-84 (in Korean).
  8. Kim, T. H., Kim, J. O. and Ryu, C. R.(2001) : Dynamic motions of model fish cage systems under the conditions of waves and current. J. Korean Fish. Soc. 34(1). 67-84 (in Korean).
  9. Kim, W. D., Han, S. W., Lee, H. J., Woo, C. S., Kim, J. Y., Kim, W. S. and Kim., C. H. (2001a) : Development of design and analysis system of mechanical rubber components. Proceeding of the 6th Pusan-Kyungnam Automotive Techno Center (PKATEC) Workshop on Automotive Technology, Pusan National University, 67-84 (in Korean).
  10. Kim, W. D., Kim, W. S. and Lee, H. J. (2001b) : Experimental testing of rubber materials for finite element alalysis, 6th Pusan-Kyungnam Automotive Techno Center (PKATEC) Workshop on Automotive Technology. Pusan National University, 67-84 (in Korean).
  11. LOland, G.(1991) : Current forces on and flow through fish farms, Ph. D. thesis, Division of Marine Hydrodynamics, The Norwegian Institute of Technology, 126-129.
  12. Matsubara, Y.(1990): Dynamic response of offshore fish cage in the regular wave, Journal of the Japan Coastal Engineering Society 37, 714-718.
  13. MSC/PATRAN(1999) : User documentation ver 9.0.
  14. MSC/NASTRAN(1999) : User documentation ver 70.7.
  15. Oltedal, G., Lien, E. and Aarsnes, J. V. (1989) : Simulation of fish cage response to waves and current. Aquaculture Engineering Technologies for the Future, IchemE Symposium Series 111, 123-132.
  16. Ormberg, H.(1991): Non-linear response analysis of floating fish farm systems. Ph. D. thesis. Division of Marine Structures. The Norwegian Institute of Technology, Trondheim, 54-79.
  17. Ormberg, Hand Slaattelid, O. H.(1993): Response analysis of floating fish farms. Proceedings of The First International Conference on Fish Farming Technology, 185-192.
  18. Slaattelid, O. H.(1990): Model test with flexible, circular floats for fish farming. Engineering for Offshore Fish Farming Conference. Glasgow, United Kingdom, 93-106.
  19. Tsukrov I., Mustafa, O. Fredriksson, D., Swift, M. Baldwin, K. and Celikkol, B. (2001) : Open ocean aquaculture engineering: Numerical modeling. MTS Journal 34(1), 29-40.