Analysis of GIUH Model using River Branching Characteristic Factors

하천분기 특성인자를 고려한 지형학적 순간단위도 모형의 해석

  • Ahn, Seung-Seop (Department of Urban Information & Cadastral Engineering, Kyungil University) ;
  • Kim, Dae-Hyeung (Department of Urban Information & Cadastral Engineering, Kyungil University) ;
  • Heo, Chang-Hwan (Department of Civil Engineering, Chungju National University) ;
  • Park, Jong-Kwon (Department of Civil Engineering, Andong Science College)
  • 안승섭 (경일대학교 도시정보지적공학과) ;
  • 김대형 (경일대학교 도시정보지적공학과) ;
  • 허창환 (충주대학교 토목공학과) ;
  • 박종권 (안동과학대학 토목과)
  • Received : 2002.09.12
  • Accepted : 2002.11.22
  • Published : 2002.12.31

Abstract

The purpose of this research was to develop a model that minimizes time and money for deriving topographical property factors and hydro-meteorological property factors, which are used in interpreting flood flow, and that makes it possible to forecast rainfall-runoff using a least number of factors. That is, the research aimed at suggesting a runoff interpretation method that considers the river branching characteristics but not the topographical and geological properties and the land cover conditions, which had been referred in general. The subject basin of the research was the basin of Yeongcheon Dam located in the upper reaches of the Kumho River. The parameters of the model were derived from the results of abstracting topological properties out of rainfall-runoff observation data about heavy rains and Digital Elevation Modeling(DEM). According to the result of examining calculated peak runoff, the Clark Model and the GIUH Model showed relative errors of 1.9~23.9% and 0.8~11.3%, respectively and as a whole, the peak values of hydrograph appeared high. In addition, according to the result of examining the time when peak runoff took place, the relative errors of the Clark Model and the GIUH Model were 0.5~1 and 0~1 hour respectively, and as a whole, peak flood time calculated by the GIUH Model appeared later than that calculated by the traditional Clark Model.

본 연구에서는 홍수유출해석시 사용되는 지형특성인자와 수문기상학적 특성인자 추출에 소요되는 시간적 경제적 노력을 최소화함은 물론, 가능한 한 최소한의 인자를 사용하여 강우-유출예측이 가능하도록 모형을 구축하는데 목적을 두었다. 즉, 강우-유출해석시 일반적으로 사용되던 지형 지질특성, 토지피복상태 등의 인자를 고려하지 않고 단순히 유역의 하천 분기특성만을 고려한 유출해석방법 제안하고자 하였다. 연구대상유역은 금호강 상류에 위치한 영천댐유역을 대상으로 하여 주요 호우시 강우-유출량 관측자료와 DEM자료를 이용한 공간특성자료 추출결과를 이용하여 모형매개변수를 추출하였다. 분석결과 실측 첨두치에 대한 추정 첨두 유출량의 상대오차가 Clark 및 GIUH 모형에서 각각 1.9~23.9% 및 0.8~11.3%로 나타내고 있었으며, 전체적으로 볼 때 GIUH모형에 의한 수문곡선의 첨두치가 크게 나타나고 있는 것으로 검토되었다. 그리고, 계산된 첨두 유출량의 발생시각에 대한 검토결과 Clark 모형과 GIUH 모형을 이용한 경우에 대하여 각각 0.5~1시간 및 0~1시간의 상대오차를 나타내고 있었으며, 전체적으로 볼 때 GIUH 모형을 이용할 경우 기존에 사용되던 Clark 모형에 비해 홍수 첨두 발생시각이 늦은 것으로 검토되었다.

Keywords