Journal of Korea Foundry Society (한국주조공학회지)

Korea Foundry Society (한국주조공학회)
권호 표지

Effect of Alloying Elements on the Microstructure and High Temperature Oxidation Behavior of the Electro-Slag Remelted Fe-22Cr-5Al Alloy

일렉트로 슬래그로 재용해한 Fe-22Cr-5Al 합금의 미세조직 및 고온 산화 거동에 미치는 첨가 원소의 영향

  • Kim, Moon-Hyun (School of materials science and engineering, Inha University) ;
  • Lee, Jeong-Keun (School of materials science and engineering, Inha University) ;
  • Joo, Dae-Heon (School of materials science and engineering, Inha University) ;
  • Kim, Myung-Ho (School of materials science and engineering, Inha University)
  • 김문현 (인하대학교 재료공학부) ;
  • 이정근 (인하대학교 재료공학부) ;
  • 주대헌 (인하대학교 재료공학부) ;
  • 김명호 (인하대학교 재료공학부)
  • Published : 2002.12.20
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of alloying elements added on the microstructure and high temperature oxidation behavior of the electro-slag remelted Fe-22Cr-5Al alloy were investigated. The amount of casting defect was makedly reduced by the electro-slag remelting. The electro-slag remelted ingot had a directionally solidified structure and cleaner surface than that of air-melted one. The high temperature oxidation reststance was greatly improved by the addition of Be and Zr.

Keywords

References

  1. J. Jedlinski, A. Glazkov, M. Konopka, G. Borchardt, E. Tscherkasora, M. Bronfin, and M. Nocun: Applied Surface Sci. 'An XPS/SEM/EDX study of the early oxidation stages of the Fe-19Cr-5A1(+Y) alumina-forming alloys' 103 (1996)205-216 https://doi.org/10.1016/0169-4332(96)00521-1
  2. Y. C. Shin, K. S. Lee, K. H. Oh, W. W. Park, and H. Y. Ra: J. Kor. Met. & mater., 'Effect of Cr, Al and La on High Tem-perature Oxidation Kinetucs in Melt Spun Fe-Cr-Al-La Alloy Ribbons' 34(1996)936-942
  3. I. M. Wolff, L. E. lorio, T. Rumpf, P. V. T. Scheers, and J. H. Potgieter : Met. Sci. Eng., 'Oxidation and corrosion behav-iour of Fe-Cr and Fe-Cr-Al alloys with minor alloying additions' A234 (1998) 264-276
  4. B. W Lee, H. I. Park, J. S. Kim, K. H. Lee, and H. S. Kim : Kor. J. Mater. Res., 'A Study on the Behaviour of High Temperature Corrosion of Fe-22Cr-5A1-X Alloy (X = Zr, Y)' 7(1997)898-907
  5. S. S. Kim, S. M. Joo, H. G. Joo, D. J. Lee, and D. C. Choi: J. Kor. Foundrymen's Soc., 'Effect of Ti, Hf and Zr Alloy- ing Elements on Mechanical Properties and Fracture Behaviors of Fe-30A1-5Cr Alloys' 21(2001) 24-32
  6. S. M. Joo, H. C. Choi, K. M. Lee, D. J. Lee and D. C. Choi: J. Kor. Met. & mater., 'Effect of Alloying Elements on Microstructures, Mechanical Properties and Fracture Behaviors for Fe-Cr-Al Ternary Alloys' 38(2000) 260-270
  7. C. Badini and F. Laurella : Surface and Coatings Tech., 'Oxidation of FeCrAl alloy : influence of temperature and atmosphere on scale growth rate and mechanism' 135 (2001)291-298 https://doi.org/10.1016/S0257-8972(00)00989-0
  8. S. C. Choi, S. H. Kim, D. B. Lee, and H. S. Park : J. Kor. Met. & Mater., 'The Effect of the Zr Addition on the Oxida-tion Behavior of Fe-Aluminide Intermetallic Compounds' 35(1997)145-152
  9. J. H. Lettle, T. J. Queen, and I. M. Mackemzie : Proc. of a conference on ElectoSlag Refining, 'Metallurgical study of electroslag-refined plates' (1973) 43-53
  10. J. K. Lee, J. S. Byun, and M. H. Kim : J. Kor. Inst. Met. & Mater., "Physical Chemistry : Effects of Beryllium on the Characteristics of Oxide Film in the Al-Si-Mg Alloy" 38 (2000)219-225
  11. R. J. Howkins, D. J. Swinden, and D. N. Pocklington: Proc. of a conference on EklectroSlag Refining, "Relevance of laboratory experiments to the control of composition in pro-duction-scale ESR" (1973) 21-34
  12. K. Messaoudi, A. M. Huntz, and B. Lesage: Met. Sci. Eng., 'Diffudion and growth mechanism of $AI_{2}O_{3}$, scales on fer-ritic Fe-Cr-Al alloys" A247 (1998) 248-262