International Journal of Precision Engineering and Manufacturing

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Autonomous Sensor Center Position Calibration with Linear Laser-Vision Sensor

  • Jeong, Jeong-Woo (Graduate School of Electrical Engineering (Control and Automation), University of Ulsan) ;
  • Kang, Hee-Jun (School of Electrical Engineering (Control and Automation), University of Ulsan)
  • Published : 2003.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

A linear laser-vision sensor called ‘Perception TriCam Contour' is mounted on an industrial robot and often used for various application of the robot such as the position correction and the inspection of a part. In this paper, a sensor center position calibration is presented for the most accurate use of the robot-Perceptron system. The obtained algorithm is suitable for on-site calibration in an industrial application environment. The calibration algorithm requires the joint sensor readings, and the Perceptron sensor measurements on a specially devised jig which is essential for this calibration process. The algorithm is implemented on the Hyundai 7602 AP robot, and Perceptron's measurement accuracy is increased up to less than 1.4mm.

Keywords

References

  1. D. J. Bennett. D. geiger, and J. M. Hollerbach, 'autonomous Robot Calibration For Hand_Eye Coordination,' The Intenational Journal of Robotic Research Vol. 10, No. 5, pp. 550-559, 1991 https://doi.org/10.1177/027836499101000510
  2. W. S. Newman and D. W. Osborn, 'A New Method for Kinematic Parameter Calibration via Laser Line Tracking,' Proc. IEEE International Conference. on robotics and Automation, Vol.2, pp. 160-165, 1993
  3. X. L. Zhong, and J. M. lewis, 'A New Method for Autonomous Robot Calibration,' Proc. IEEE international Conference, on Robotics and Automation. on Robotics and Automation, pp. 1790-1795, 1995 https://doi.org/10.1109/ROBOT.1995.525529
  4. H. Zhuang, L. Wang and X. S. Roth, 'Simultaneous Calibration of a Robot and a Hand-Mounted Camera', Proc.IEEE International Conference. on Robotics and Automation, Vol. 2, pp. 149-154, 1993 https://doi.org/10.1109/ROBOT.1993.292139
  5. M. Ikits and J. M. Hollerbach, 'Kinematic Calibration Using a Plane Constraint,' Proc. IEEE International Conference. on Robotics and Automation, pp. 3191-9196, 1997
  6. D. Whitney, Lozinsky, and J.Rourke, 'Industrial Robot Forward Calibration Method and Results,' ASME journal of Dynamic Systems, Measure and Control, pp. 1-8, 1986
  7. M, R. Driels, L. W. Swayze, and L. S. Potter, 'Full-Pose Calibration of a Robot Manipulator using a Coordinate Measuring Machine,' International Journal of Adv. Manuf. Technol., pp. 34-41, 1993
  8. L. Kelmar and P. K. Khosla, 'Automatic Generation of Kinematics for a Reconfigurable Modular Manipulator System,' Proc. IEEE International Conference. on Robotics and Automation, pp. 663-668, 1988