Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Machining Characteristics of Ti-6Al-4V Alloy

Ti-6Al-4V 타이타늄 합금의 절삭특성에 관한 연구

  • 김남용 (충남대학교 대학원 기계공학과) ;
  • 고준빈 (한밭대학교 기계설계공학과) ;
  • 이동주 (충남대학교 기계공학과)
  • Published : 2003.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The machinability of Ti-6Al-4V titanium alloy and tool wear behavior in machining of Ti-6Al-4V titanium alloy was studied to understand the machining characteristics. This material is one of the strong candidate materials in present and future aerospace or medical applications. Recently, their usage has already been broaden to everyday's commercial applications such as golf club heads, finger rings and many decorative items. To anticipate the general use of this material and development of the titanium alloys in domestic facilities, the review and the study of the machining parameters for those alloys are necessary. This study is concentrated to the machining parameters of the Ti-6Al-4V alloy due to their dominant position in the production of titanium alloys.

Keywords

References

  1. チタニウム協會, 'チタソの加工技術,' 日刊功業新聞社, 第 1 章, 1992
  2. Third Wave AdvantEdge Theorical Manual Version 4.0
  3. Noboru Ueda, Tetsuo Matsuo 'A Study of Sawtoothed Chip Formation(1st)-Analysis of the Pitch of Shear Zones and the Distance of Slips,' J. of JSPE, Vol. 44, No. 9, pp. 1085-1091, 1978
  4. J. Sheikh-Ahmad and J. A. Bailey, 'Flow Instability in the Orthogonal Machining of CP Titanium,' J. of Manufacturing Science and Engineering, ASME, Vol. 119, pp. 307-313, 1997 https://doi.org/10.1115/1.2831108
  5. J. C. Lemaire and W. A. Backofen, 'Adiabatic Instability in the Orthogonal Cutting of Steel,' Metallugical Transactions, ASME, Vol. 3, pp. 477-481, 1972
  6. Eiji Usui, Toshiyuki Obikawa, Takahiro Shirakashi, 'Study on Machining Process of Difficult-to-Machine Materials (2nd)-Analysis of Stress and Temperature Distributions by Visio-Plasticity Technique and Finite Difference Method,' J. of JSPE, Vol. 52, No. 9, pp. 1623-1630
  7. 김남용, 고준빈, 이동주, 'Ti-6Al-4V 합금의 절삭특성과 FEM 해석 비교에 관한 연구,' 한국공작기계학회지, 제10권, 제6호, pp. 29-36, 2001
  8. 김남용, 고준빈, 이동주, '초경공구를 사용한 Ti-6Al-4V 타이타늄 합금의 절삭가공시 공구마멸과 절삭특성에 관한 연구,' 한국공작기계학회지, 제11권, 제2호, pp. 9-16, 2001