Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Rigid-Plastic FE Modeling of Frictional Contact Problems based on a Penalty Method

벌칙방법에 의한 마찰 접촉문제의 강소성 유한요소 모델링

  • 장동환 (인하대학교 자동화공학과) ;
  • 황병복 (인하대학교 기계공학부)
  • Published : 2003.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a rigid-plastic finite element method to handle the frictional contact problem between two deformable bodies experiencing large deformation. The variational formulation combined with incremental quasi-static model is employed for treating the contact boundary condition. The frictional behavior of the model obeys Coulomb's law of friction. The proposed contact algorithms are classified into two categories, one for searching contacting nodes and the other for calculating contact forces at the contact surface. A slave node and master contact segment are defined using the geometric condition of finite elements on the contact interface. The penalty parameter is used to limit the penetration between contacting bodies, and the finite elements are coupled with contact boundary elements.us gates and cavity thicknesses. Through this study we have observed that the jetting is related to the die swell of material. This means that the jotting is strongly affected by the elastic flow property rather than the viscous flow property in viscoelastic characteristics of molten polymer. Different resins have different elastic properties, and elastic flow behavior depends on the shear rate of flow, i.e. injection speed. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mole design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting regardless of amount of elasticity of polymer melt.

Keywords

References

  1. Int. J. Computers & Mathematics with Appl v.38 Solution of cantact problem using the hp-version of the finite element method I. Paczelt;B. A. Szabo;T. Szabo https://doi.org/10.1016/S0898-1221(99)00261-8
  2. J. of Material Processing Tech v.67 Development of a penalty method contact algoritm and its application to a sheet forming problem T. Shimizu;T. Sano https://doi.org/10.1016/S0924-0136(96)02840-3
  3. Int. J. Nummerical Methods in Engineering v.40 A formulation of arbitrary shaped surface elements for three-dimensional large deformation contact with friction H. Parisch;CH. Lubbing https://doi.org/10.1002/(SICI)1097-0207(19970930)40:18<3359::AID-NME217>3.0.CO;2-5
  4. J. Elasticity v.5 The Hertz contact problem with finite friction D. A. Spence https://doi.org/10.1007/BF00126993
  5. Int. J. Numerical Methods in Engineering v.9 A note on numerical computation of elastic problem A. Francavilla;O. C. Zienkiewiez https://doi.org/10.1002/nme.1620090410
  6. Comp. Methods Appl. Mech .Engrg. v.8 A finite element method for a class of contact-impact problems T. J. R. Hughes;R. L. Taylor;J. L. Sackman https://doi.org/10.1016/0045-7825(76)90018-9
  7. Commun. Appl. Number. Methods v.1 A note on tangent stifness for the fully nonlinear contact problems P. Wriggers;J. C. Simo https://doi.org/10.1002/cnm.1630010503
  8. Computers & Structures v.33 no.1 A contact searching algorithm for contact problems Z. H. Zhong;L. Nillson https://doi.org/10.1016/0045-7949(89)90141-7
  9. Computers & Structures v.52 no.2 Automatic contact serching algoritm for dynamic finite element analysis Z. H. Zhong;L. Nillson https://doi.org/10.1016/0045-7949(94)90271-2
  10. Finite element procedures for contact-impact problems Z. H. Zhong
  11. Engineering computations v.8 Elasto-plastic finite element analysis of unilateral contact with generalized Coulmb friction P. Hrycaj;S. Cescotto;J. Oudin https://doi.org/10.1108/eb023840
  12. Int. J. for Num. Mech. Eng v.26 A finite element method for elasto-plastic Structures and contact problems by parametric quadratic programming Z. Wanxie;S. Suming https://doi.org/10.1002/nme.1620261210
  13. Computers & Structures v.18 no.5 A computational method for elasto-plastic contact problems B. C. Lee;B. K. Kwak https://doi.org/10.1016/0045-7949(84)90022-1
  14. Computers & Structures v.24 no.6 Analysis and applications of elasto-plastic contact problems considering large deformation J. W. Joo;B. M. Kwak https://doi.org/10.1016/0045-7949(86)90304-4
  15. Int. J. for Numerical Methods in Engrg. v.46 Numerical formulations and algoritm for slolving contact problems in metal forming simulation L .Fourment;J. L. Chenot;K. Mocellin https://doi.org/10.1002/(SICI)1097-0207(19991130)46:9<1435::AID-NME707>3.0.CO;2-9
  16. Numerical Methods in Industrial Forming Process '89 An automatic algorithm for contact problem: Application to sheet metal forming J. B. Dalin;E. Onate
  17. Adv. Technol. Plast. v.3 Development of penalty method contact algorithm for rigid plastic FEM T. Shimizu;T. Sano
  18. J. Mater. Process. Technol. v.48 An application of a penalty mehod contact friction algorithm to a 3-dimensional tool surface expressed by a B-spline patch T. Shimizu;T. Sano https://doi.org/10.1016/0924-0136(94)01651-G
  19. Computer Methods in Applide Numerical Methods v.51 Sliding interfaces with contact-impact in large-scale Lagrangian computation J. O Hallquist;G. L. Goudreau;Benson DJ
  20. Nonlinear finite elemednt for continua and structures T. Belytschko;W. K. Liu;B. Moran
  21. Int. J. for Numerical Methods in Engineering v.36 A continuum-based finite element formulation for the implicit solution of multibody large deformation frictional contact problems T. A. Laursen;J. C. Simo https://doi.org/10.1002/nme.1620362005
  22. A contact searching algorithm for axisymmetric finite element analysis S. H. Cho
  23. Applications of numerical methods to forming processes v.28 Rigid plastic finite element anaysis of ring compression C. C. Chen;S. Kobayashi
  24. Proceedings of NAMRC IX ALPID - A General Purpose FEM Program for Metal Forming S. I. Oh;G. D. Lahoti;T. Altan
  25. Materials and Practices Forming Equipments Air Force Material Laboratory
  26. Int. J. Number. Mech. Engng v.48 Contact search strategies for FEM simulation of the blow molding process S. Wang; A. Makinouchi https://doi.org/10.1002/(SICI)1097-0207(20000610)48:4<501::AID-NME887>3.0.CO;2-S