The Transactions of the Korean Institute of Electrical Engineers C (대한전기학회논문지:전기물성ㆍ응용부문C)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Surface Modification of Glass Fiber for Polymer Insulator by Plasma Surface Treatment

플라즈마 표면처리에 따른 고분자절연재료용 유리섬유의 표면개질

  • Published : 2003.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

It is hard to expect excellent electrical, mechanical and chemical properties from most of the composite materials presently used as insulators due to insufficient wettability property caused by the difference of interfacial properties between the matrix material and the reinforcer. Therefore, various interfacial coupling agents have been developed to improve the interfacial properties of composite materials. But if the wettable coupling agents are used outdoor for a long time, change in quality takes place in the coupling agents themselves, bringing about deterioration of the properties of the composite materials. In this study, glass surface was treated by plasma to examine the effect of dry interface treatment without coupling agent. It was identified that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. Also, the surface resistance rate and dielectric property were improved.

Keywords

References

  1. K. Dusek, 'Epoxy Resins and Composites', Springer-Verlag, pp. 24-54, 1985
  2. Y. Watanabe, 'Development of Outdoor Epoxy Resin Mold Apparatus for Distribution Systems', IEEE Trans, On Power Delivery, Vol. 5, No. 1, pp. 204-211, 1990 https://doi.org/10.1109/61.107275
  3. H. Hara, C. H. Park, M. Akazaki, 'Effect of Heat Treatment and Mechanical Stress on the Dielectric Strength of Uniaxially Drawn PET Film', IEE EI, Vol. 19, No. 4, pp. 273-280, 1984 https://doi.org/10.1109/TEI.1984.298799
  4. M. H. Geier, 'Quality Handbook for Composite Materials', Chapman & Hall, pp. 4, 1994
  5. Dr. A. Brent Strong, 'Fundamentals of Composites Manufacturing', Society of Manufacturing Engineers, pp. 15-21, 1989
  6. R. Yosomita, K. Morimoto, A. Nakajima, Y. Ikada, T. Suzuki, 'Adhesion and Bonding in Composites', Marcel Dekker Inc., pp. 109-147, 1989
  7. Edwin P. Plueddemane, 'Interface in Polymer Matrix Composite', Academic Press, New York & London, Vol. 6, pp. 173-216, 1974
  8. Akemi Futakawa and S. Yamasaki, 'Dynamic Deformation and Strength of Stator End Winding During Sudden Short Circuit', IEEE EI, Vol. 16, No. 1, pp. 31-39, 1981 https://doi.org/10.1109/TEI.1981.298401
  9. W. Johnson and S. K. Ghoshm, 'Some Physical Defects Arising in Composite material Fabrication', J. of Materials Sci., Vol. 16, pp. 285-301, 1981 https://doi.org/10.1007/BF00738617
  10. M. Mercedes Pastor-Blas, Jose Miguel Martin-Martinez, John G. Dillard, 'Surface Characterization of Synthetic Vulcanized Rubber Treated with Oxygen Plasma', Surface and Interface Analysis, Vol. 26, pp. 385-399, 1998 https://doi.org/10.1002/(SICI)1096-9918(19980501)26:5<385::AID-SIA384>3.0.CO;2-K
  11. N. Dilsiz, E. Ebert, W. Weisweiler, G. Akovali, 'Effect of Plasma Polymerization on Carbon Fibers Used for Fiber/Epoxy Composites', Journal of Colloid and Interface Science, Vol. 170, pp. 241-248, 1995 https://doi.org/10.1006/jcis.1995.1093
  12. 임경범, 이덕출, '플라즈마 표면처리가 Poly(ethylene terephthalate) 필름의 전기적 및 기계적 성질에 미치는 영향', 한국산업안전학회, Vol. 16, No. 3, pp. 61-67, 2001
  13. D. W. Van Krevelen, 'Properties of Polymers', Elsevier Scientific Publishing Company, Amsterdam, pp. 227-240, 1990
  14. 堺 孝 夫 , '放電による固體誘電體表面の劣化と改質', 靜電氣學會誌, Vol. 18, No. 5, pp. 449-456, 1994
  15. Michael L. Owen and Patrick J. Smith, 'Plasma treatment of polydimethylsiloxane', Polymer Surface Modification: Relevance to Adhesion, K. L. Mitta(ed.), VSP, pp.319-325, 1995
  16. 中尾一宗, '表面, 接羞, 複合材料', 表面技術, Vol. 42, No. 10, pp. 964-975, 1991
  17. R. Yosomota, K. Morimoto, A. Nakajima, Y. Ikada, T. Suzuki, 'Adhesion and Bonding in Composites', Marcel Dekker Inc., pp. 49-81, 1989