Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Material Flow and Surface Expansion in Radial-Backward Extrusion

레이디얼 압출과 연계된 후방압출의 소재유동과 표면확장

  • 고병두 (인하대학교 자동화공학과) ;
  • 최호준 (인하대학교 자동화공학과) ;
  • 장동환 (인하대학교 자동화공학과) ;
  • 황병복 (인하대학교 기계공학과)
  • Published : 2003.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The paper deals with an analysis of an extrusion process with a divided material flow in a combined radial - backward extrusion. The paper discusses the influences of tool geometry such as punch nose angle, relative gap height, die comer radius on material flow and surface expansion into can and flange region. To analyze the process, numerical simulations by the FEM and experiment, an Al alloy as a model material have been performed. Based on the results, the influence of design parameters on the distribution of divided material flow and surface expansion are obtained.

Keywords

References

  1. Advanced Technology of Plasticity v.1 Possibilities and Limitations of Cold Extrusion Processes Combined with Radial Extrusion Osen,W.
  2. J. of Material Processing Tech. v.63 Influence of Die Geometry on the Workability of Conversion Coatings Combined with Soap Lubricant in Cold Forming of Steels Saiki.H;Ngaile,G.;Ruan,L. https://doi.org/10.1016/S0924-0136(96)02629-5
  3. J. of Material Processing Tech. v.60 Control of Material Flow in a Combined Backward Can-Forward Rod Extrusion Kuzman,K.;Pfeifer,E.;Bay,N.;Hunding,J. https://doi.org/10.1016/0924-0136(96)02319-9
  4. Annals of the CIRP v.40 Lubrication Limits in Backward Can Extrusion at Low Reduction Bay,N.;Lassen,B.;Pedersen,K. https://doi.org/10.1016/S0007-8506(07)61977-5
  5. J. of Material Processing Tech. v.61 Limits of Lubrication in Backward Can Extrusion: Analysis by the Finite-Element Method and Physical Modeling Experiments Bennani,B.;Bay,N. https://doi.org/10.1016/0924-0136(95)02181-7
  6. J. of Material Processing Tech. v.113 The Influence of Die Geometry on the Randial Extrusion Processes Ko,B.D.;Lee,S.H.;Kim,D.J.;Hwang,B.B. https://doi.org/10.1016/S0924-0136(01)00704-X
  7. J. of Material Processing Tech. v.113 The Forming Characteristics of Radial-forward Extrusion Lee,Y.S.;Hwang,S.K.;Chang,Y.S.;Hwang,B.B. https://doi.org/10.1016/S0924-0136(01)00705-1
  8. J. of Material Processing Tech. v.113 The Forming Characteristics of Radial-Backward Extrusion Choi,H.J.;Choi,J.H.;Hwang,B.B. https://doi.org/10.1016/S0924-0136(01)00703-8
  9. Trans. of Material Processing v.9 A Study on the Forming Characteristic of Radial Extrusion Combined with Backward Extrusion Jang,D.H.;Choi,H.J.;Choi,J.H.;Lee,H.Y.;Hwang,B.B.
  10. Metal and Ceramics Information Center Forming Equipment, Materials, and Practices Air Force Material Laboratory
  11. Trance, ASME, J. of Engn. for Industry v.94 no.3 Influence of Flow Stress and Friction upon Metal Flow in Upset Forging of Rings and Cylinders Lee,C.H.;Altan,T. https://doi.org/10.1115/1.3428250
  12. Proceeding of NAMRC. IX ALPID-a general purpose FEM program for metal forming Oh,S.I.;Lahoi,G.D.;Altan,T.
  13. J. of Material Processing Tech. v.71 Precision Forging Process with Axially Driven Container Osakada,K.;Wang,X.;Hanami,S. https://doi.org/10.1016/S0924-0136(97)00155-6
  14. J. of Mach. Tool Manufact. v.35 Backward Can Extrusion of Steels : Effect of Punch Design on Flow Mode and Void Volume Fraction Bennani,B.;Oudin,J. https://doi.org/10.1016/0890-6955(94)E0035-H
  15. J. of Material Processing Tech. v.54 Formability in Extrusion Forging; the Influence of Die Geometry and Friction Conditions Giardini,C.;Ceretti,E.;Maccarini,G. https://doi.org/10.1016/0924-0136(94)01780-8
  16. 한국정밀공학회 추계학술대회 논문집 후방 압출 펀치의 마멸저감을 위한 금형 형상설계 박태준;이동주;김동진;김병민

Cited by

  1. Influence of punch face angle and reduction on flow mode in backward and combined radial backward extrusion process vol.21, pp.6, 2015, https://doi.org/10.1007/s12540-015-5276-y