Emulsion stability of cosmetic creams based on water-in-oil high internal phase emulsions

  • Park, Chan-Ik (Skinbio Ltd., Rm. 811, Lead Science Hall, The University of Suwon) ;
  • Cho, Wan-Gu (LG Cosmetics R&D Institute) ;
  • Lee, Seong-Jae (Department of Polymer Engineering, The University of Suwon)
  • Published : 2003.09.01

Abstract

The emulsion stability of cosmetic creams based on the water-in-oil (W/O) high internal phase emulsions (HIPEs) containing water, squalane oil and cetyl dimethicone copolyol was investigated with various compositional changes, such as electrolyte concentration, oil polarity and water phase volume fraction. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The slope change of complex modulus versus water phase volume fraction monitored in the linear viscoelastic region could be explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsions: the greater the increase of complex modulus was, the more the coalescence occurred and the less consistent the emulsions were. Emulsion stability was dependent on the addition of electrolyte to the water phase. Increasing the electrolyte concentration increased the refractive index of the water phase, and thus decreased the refractive index difference between oil and water phases. This decreased the attractive force between water droplets, which resulted in reducing the coalescence of droplets and increasing the stability of emulsions. Increasing the oil polarity tended to increase emulsion consistency, but did not show clear difference in cream hardness among the emulsions.

Keywords

References

  1. J. Colloid Interface Sci. v.159 Highly concentrated water-in-oil emulsions: influence of electrolyte on their properties and stability Aronson,M.P.;M.F.Petko https://doi.org/10.1006/jcis.1993.1305
  2. European Patent 0,060,138 Low density porous cross-linked polymeric materials and their preparation and use as carriers for included liquids Barby,D.;Z.Haq
  3. Langmuir v.3 An unusual gel without a gelling agent Bergeron,V.;F.Sebba https://doi.org/10.1021/la00077a050
  4. Adv. Polym. Sci. v.126 High internal phase emulsions structures, properties and use in polymer preparation Cameron,N.R.;D.C.Sherrington https://doi.org/10.1007/3-540-60484-7_4
  5. Ph. D. Thesis, University of Hull Forces between liquid surfaces and emulsion stability Cho,W.G.
  6. Macromol. Res. v.11 Effect of rubber on microcellular structures from high internal phase emulsion polymerization Choi,J.S.;B.C.Chun;S.J.Lee https://doi.org/10.1007/BF03218338
  7. Polymer v.39 High temperature properties of poly(styrene-co-alkylmaleimide) foams prepared by high internal phase emulsion polymerization Duke,J.R.;M.A.Hoisington;D.A.Langlois;B.C.Benicewicz https://doi.org/10.1016/S0032-3861(98)00115-3
  8. Intermolecular and Surface Forces(2nd ed.) Israelachvili,J.
  9. Polymer(Korea) v.26 Morphology and properties of microcellular foams by high internal phase emulsion polymerization: effect of emulsion compositions Jeoung,H.G.;S.J.Ji;S.J.Lee
  10. Colloids and Surfaces v.24 The formation of gel-emulsions in a water/nonionic surfactant/oil system Kunieda,H.;C.Solans;N.Shida;J.L.Parra https://doi.org/10.1016/0166-6622(87)80352-9
  11. Colloids and Surfaces v.36 The stability of gelemulsions in a water/nonionic surfactant/oil system Kunieda,H.;M.Yano;C.Solans https://doi.org/10.1016/0166-6622(89)80246-X
  12. J. Colloid Interface Sci. v.42 A study of medium and high internal phase ratio water/polymer emulsions Lissant,K.J.;K.G.Mayhan https://doi.org/10.1016/0021-9797(73)90025-8
  13. Fundamentals of Interfacial Engineering Stokes,R.J.;D.F.Evans
  14. Physicochemical Constants of Pure Organic Compounds Timmermans, J.
  15. Chem. Eng. J. v.70 Ion exchange modules formed from polyhipe foam precursors Wakeman,R.J.;Z.G.Bhumgara;G.Akay
  16. Langmuir v.4 Toroidal microstructures from water-in-oil emulsions Williams,J.M. https://doi.org/10.1021/la00079a007