Journal of the Korea Institute of Military Science and Technology (한국군사과학기술학회지)

The Korea Institute of Military Science and Technology (한국군사과학기술학회)
권호 표지

Numerical Investigation for Spray Angles of Dual Swirl Injector

Dual Swirl 인젝터의 분산각에 관한 해석적 연구

  • 정해승 (충남대학교 기계공학과 대학원) ;
  • 김선진 (청양대학 소방안전관리과)
  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Numerical analysis of the spray angles of Dual swirl injector were investigated to obtain basic design data and to predict the combustion performance. Using the commercial thermal hydraulic program, discharge coefficients and spray angles were numerically analyzed with recess length, pressure drop, velocity ratio, mixture ratio and back hole length. Water was used as simulants for oxidizer and fuel, respectively to compare the experimental results. Swirl injectors were designed to inject oxidizer of 70.5g/s and fuel of 29.5g/s at the pressure drop of 1MPa and two recess lengths were considered. In addition, the effect of injector geometry coefficient and velocity ratio on the discharge coefficient was studied.

Keywords

References

  1. C.W. Hirt, and B.D. Nichols, 'Volume of Fluid Method for the Dynamics of Free Boundaries', Journal of Computational Physics, Vol.39, pp.201-225, 1981 https://doi.org/10.1016/0021-9991(81)90145-5
  2. D. P. Schmidt, I. Nouar, P. K Senecal, C. J Rutland, J. K Martin and R. D. Reitz, 'Pressure Swirl Atomization in the Near Field', SAE Paper 01-0496, SAE, 1996
  3. N. K ,Rizk and A. H. Lefebvre, 'Prediction of velocity coefficient and spray cone angle for simplex swirl atomizers', ICLASS-85
  4. M. Sasaki, H. Sakamoto, M. Takahashi, T. Tomita, H. Tamura, 'Comparative study of recessed and non-recessed swirl coaxial injectors', 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 1997
  5. 八柳信之, '氣液同軸型噴射要素による噴霧流の し寅驗および解析(3)', 航空宇宙技術硏究所報告 769호,pp.1-30,19
  6. S.H. Hwang, Y.B. Yoon, 'Effect of Backhole on Spray Characteristics of Swirl Injectors in Liquid Propellants Rocket Engine', Journal of the Korean Society of Propulsion Engineers, Vol.7, No.2, pp.23-35, 2003