Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Finite Element Analysis of Slab Deformation under the Width Reduction in Hot Strip Mill

열간압연 폭압하시 슬래브 변형거동의 유한요소해석

  • 천명식 (포항산업과학연구원 압연프로세스연구팀) ;
  • 정제숙 (포항산업과학연구원 압연프로세스연구팀) ;
  • 안익태 (부산대학교 정밀기계공학과/ 정밀정형 및 금형가공연구센터) ;
  • 문영훈 (부산대학교 정밀기계공학과/ 정밀정형 및 금형가공연구센터)
  • Published : 2003.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Rigid-plastic finite element analyses on the deformation of slabs at various width reductions have been performed. By using commercial finite element code, dog-bone profile, crop profile and the longitudinal width profile after edging and Horizontal rolling have been analysed. The deformation behavior of slab for the heavy edger mill has also been compared with that for the sizing press. From the deformation analyses, it was found that the sizing press-horizontal rolling method is more efficient in width reduction than that of heavy edger mill-horizontal rolling. The results of finite element analyses fer the deformation of slab were well confirmed by the actual operational data. It was found that the amount of width variation after sizing and rolling is about 5∼10mm.

Keywords

References

  1. Nikaido, H., Fuziwara, K., Abe, H. and Nihei, M., 1984, "Development of slab sizing press for heavy width reduction in hot strip mills", Iron and Steel Engineer, Vol.21, pp. 48-53.
  2. Mougenez, Codur, Y., Roux, G. and Alberny, R., 1999, "Development of sizing press at Sollac Fos", Ironmaking and Steelmaking, Vol.26, No.1, pp. 27-30. https://doi.org/10.1179/030192399676906
  3. Hira, T., Isobe, H., Abe, H., Nikaido, H. Fujisu, T. and Zuyzma, S., 1990, "Minimization of crop control and width control of hot rolling slabs of width by sizing press", Kawasaki Steel Tech. Rep., No.22, pp. 32-40.
  4. Muller and Rohde W., 1992, "Behaviour of slabs under deformation in a sizing press with large width reductions", SMS Technical Report Rolling Mill, Vol.15, No.5, pp. 139-148.
  5. 천명식, 정제숙, 2002, "Deformation behaviour of slab sizing press in hot strip mill", 한국소성가공학회, 2002년 추계학술대회논문집, Vol.1, pp. 183-186
  6. Ginzburg V.B., 1989, "Width change of flat rolled products", Rolling Mill Technology series, Vol.3, pp. 1-33.
  7. Shida S., 1974, "Effect of carbon content, temperature and strain rate on compression flow stress of carbon steels", Hitachi Research Lab. Report, pp. 1-9.

Cited by

  1. Prediction of Plastic Deformation Behavior of the Side Surface of Slab during Hot Rough Rolling vol.23, pp.7, 2014, https://doi.org/10.5228/KSTP.2014.23.7.425
  2. Development of quality monitoring system using thickness gauge, width gauge, themometer for a rolling operation in hot rolling mill plant vol.11, pp.4, 2016, https://doi.org/10.13067/JKIECS.2016.11.4.387