Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

A Study on the Influence of Ceramic Coating on Characteristics of Friction and Abrasion of Aluminum Alloy(7075 T6) Used in Mechanical Casting

세라믹 코팅이 기계 주조용 알루미늄합금(7075 T6)의 마찰ㆍ마모특성에 미치는 영향에 관한 연구

  • Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering, ReCAPT, Gyeongsang National University) ;
  • Jung, Kwang-Jo (Graduate School, Gyeongsang National University) ;
  • Lu, Long (Graduate School, Gyeongsang National University)
  • 류성기 (경상대학교 기계항공공학부, 항공기부품기술연구소) ;
  • 정광조 (경상대학교 대학원 기계설계학과) ;
  • 로룡 (경상대학교 대학원 기계설계학과)
  • Published : 2003.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study deals with the influence of ceramic coating on characteristics of friction and abrasion of aluminum allot(7075 T6) used in mechanical casting. In this research, frictional wear characteristic of ceramic coating materials such as $A1_2O_3$, $Si_3N_4$, SiC was investigated using aluminum alloy(7075 T6) and stainless 403 cast iron under room temperature and normal air pressure. The coating layer was observed using SEM. The conclusions are as follows: 1) Friction coefficients of $A1_2O_3$, SiC and $Si_3N_4$ are obtained 0.63 0.56 and 0.54 respectively. 2) Abrasion resistance of stainless 403 cast iron with $Si_3N_4$ is the best among the ceramic coating materials. 3) Abrasion mechanism of aluminum alloy(7075 T6) coaled with ceramic material and stainless 403 cast iron is caused by brittle fracture. 4) Coating the ceramic material on the aluminum alloy(7075 T6) can effectively increase the antiwear, impact properties, and corrosion resistance.

Keywords

References

  1. Sture Hogmark and Per Hedenqvist, 'Tribology Characterization of Thin, Hard Coatings', Proceedings of the 6th Nordic on Tribology, Vol 3, PP. 735-747, 1994
  2. Hocking, M.g., Vasantasree, V. and Sidky, P.S., 'Metallic and Ceramic Coatings,' Long man Scientific & Technical, New York, 1989
  3. 김성와 김창근, '플라스마 용사 기술의 새로운 이해', 기계와 재료, 4-1, pp. 84-93, 1992
  4. E. Lugscheider, 'Plasma Spraying for Wear Applications', Proceedings of the National Thermal Spray Conference, pp. 14-17. 1987
  5. Takeuchi J., Nakahira H., Nagai J., 'Physical Properties of Some Oxide coatings by Low Pressure Plasma Spraying' 2nd Plasma- TechniqUe- Symposium, Vol 2, pp. 141-151. 1991
  6. H. E. Hintermann, 'Adhesion, Friction, and Wear of Thin Hard Coatings', Wear, Vol. 100, pp. 381-397, 1984 https://doi.org/10.1016/0043-1648(84)90023-1
  7. Plint & Partners Ltd, Multipurpose friction and wear tester(TE 53LI PSINT LDT), manual, pp. 01-02. 2001