DOI QR코드

DOI QR Code

Mechanical and Repair Performance of Sprayed Ductile Fiber Reinforced Cememtitious Composite(ECC)

습식스프레이공법으로 타설된 고인성 섬유보강 모르타르(ECC)의 역학적 특성과 보수 성능

  • Kim, Yun-Yong (Dept. of Civil and Environmental Engineering, University of Michigan)
  • 김윤용 (미시간대학 토목환경공학과)
  • Published : 2003.06.01

Abstract

This paper presents an experimental study on the potential durability enhancement of infrastructures repaired by a sprayed high ductile fiber-reinforced cementitious composite (ECC). For this study, a PVA-ECC which exhibits sprayable properties in the fresh state and tensile strain-hardening behavior in hardened state was sprayed and tested. The experimental results show that the sprayed ECC exhibits mechanical properties with strain capacity comparable to the cast ECC with the same mix design. During loading, the crack widths of ECC are tightly controlled with an average of 30${\mu}m$. It is also revealed that when sprayed ECC is used as a repair material, ductility represented by deformation capacity at peak load of repaired beams in flexure are obviously increased in comparison to those of commercial prepackaged mortar (PM) repaired beams. In addition to high delamination resistance, the significant enhancement of energy absorption capacity and crack width control in ECC repair system suggest that sprayed ECC can be effective in extending the service life of rehabilitated infrastructures.

본 논문에서는 습식스프레이 공법에 의하여 타설되는 고인성 섬유보강 모르타르(ECC)을 구조물의 보수에 적용함으로써 구조물의 내구성을 증진시키는 효과에 대하여 연구하였다. 이를 위하여 굳지않은 상태에서는 스프레이 공정에 적합한 유동특성을 갖고 있으면서, 굳은 후에는 인장변형경화거동을 나타내는 ECC를 스프레이 공법으로 타설하여 시험체를 제작하여 실험하였다. 실험 결과, 스프레이된 ECC의 역학적 특성(인장 및 휨거동)이 일반적인 타설법에 의하여 제작된 ECC와 거의 일치하는 것으로 나타났으며, 이 때에 ECC의 균열폭은 평균 30${\mu}m$로 제어되었다. 구콘크리트/ECC 합성보의 에너지 흡수능력은 구콘크리트/상용 스프레이 모르타르(PM) 합성보에 비하여 매우 우수한 것으로 나타났으며, 경계면의 부착성능도 양호한 것으로 평가되었다. ECC 고유의 균열제어능력과 더불어 보수된 부재(구콘크리트/ECC 합성보)의 탁월한 휨변형능력, 에너지 흡수능력 등은 구조물의 내구성을 증진하는데 큰 이점으로 작용하게 될 것이다.

Keywords

References

  1. V.C. Li, 'Advances in ECC Research,' ACI Special Publicadon on Concrete: Material Science to Applications, SP 206-23, 2002, pp.373-400
  2. V.C. Li, 'Reflections on the Research and Development of Engineered Cementitious Composites(ECC),' Proc. of the JCI International Workshop on Ductile Fiber Reinforced Cementitious Composites (DFRCC-Application and EvaIuation, Takayama, Japan, Oct, 2002. pp.1-21
  3. Y.M. Lim and V.C. Li, 'Durable Repair of Aged Infrastructures Using Trapping Mechanism of Engineered Cementitious Composites,' Journal Cement and Concrete Composites, Vol. 19, No. 4, 1997, pp.373-385 https://doi.org/10.1016/S0958-9465(97)00026-7
  4. T., Kamada, and V.C. Li, 'The Effects of Surface Preparatdon on the Fracture Behavior of ECC/Concrete Repair System,' JournaI of Cement and Concrete Composites, Vol.22, No.6, 2000, pp.423-431 https://doi.org/10.1016/S0958-9465(00)00042-1
  5. 김윤용, '미세역학이론과 레올로지 제어에 의한 습식스프레이용 고인성 섬유보강 모르타르(ECC)의 개발', 한국콘크리트학회논문집, 게재심사중,2003
  6. S.A Austin- P.J. Robins, and C.I. Goodier, 'The performance of hardened wet-process sprayed mortars,' Magazine of Concrete Research, Vol. 52, No. 3, June, 2000, pp.195-208 https://doi.org/10.1680/macr.2000.52.3.195
  7. K. Wang, D.C. Jansen, and S. Shah, 'Permeability study of cracked concrete,' Cement and Concrete Research Vol.27, No.3, 1997, pp.381-393 https://doi.org/10.1016/S0008-8846(97)00031-8
  8. V.C. Li, Y.Y. Kim, G. Fischser, and M. Weimann, '3rd Progress Report on Duroble link SIabs for Jointless Bridge Decks Based on Strain-Hardening Cementitious Composites,' Michigan Department of Transportation, Dec, 2002. 24pp
  9. M Maalej and V.C. Li, 'Flexural/Tensile Strength Ratio in Engineered Cementitious Composites,' ASCE Journal of Materials in GiviI Engineerins, Vol.6, No.4, Nov., 1994, pp.513-528 https://doi.org/10.1061/(ASCE)0899-1561(1994)6:4(513)

Cited by

  1. Comparison Analysis of Fiber Distribution and Workability for Amorphous Steel Fiber Reinforced Concrete vol.23, pp.4, 2014, https://doi.org/10.7844/kirr.2014.23.4.47