DOI QR코드

DOI QR Code

Evaluation of the Minimum Shear Reinforcement Ratio of Reinforced Concrete Members

철근콘크리트 부재의 최소전단보강근비의 평가

  • Lee Jung-Yoon (Dept. of Architectural Engineering, Sungkyunkwan University) ;
  • Yoon Sung-Hyun (Construction Engineering Service Network Co.)
  • Published : 2004.02.01

Abstract

The current Korean Concrete Design Code(KCI Code) requires the minimum and maximum content of shear s in order to prevent brittle and noneconomic design. However, the required content of the steel reinforcement In KCI Code is quite different to those of the other design codes such as fib-code, Canadian Code, and Japanese Code. Furthermore, since the evaluation equations of the minimum and maximum shear reinforcement for the current KCI Code were based on the experimental results, the equations can not be used for the RC members beyond the experimental application limits. The concrete tensile strength, shear stress, crack inclination, strain perpendicular to the crack, and shear span ratio are strongly related to the lower and upper limits of shear reinforcement. In this research, an evaluation equation for the minimum content of shear reinforcement is theoretical proposed from the Wavier's three principals of the mechanics of materials.

철근콘크리트 부재가 취성적이며 국부적으로 파괴되지 않도록 하기 위하여 각 기준식에서는 철근콘크리트 부재의 최소전단 보강근비를 요구하고 있다. 우리나라에서 현재 사용되고 있는 철근콘크리트 구조설계기준의 최소전단철근비에 대한 기준식과 캐나다 기준식, 유럽 기준식, 일본건축학회 기준식을 비교하면 각 기준식에 의하여 계산된 최소전단보강근비 값에는 많은 차이가 있어 그 신뢰성에 의문을 갖게 한다. 즉, 동일한 콘크리트의 실린더 압축강도에 대하여 각 기준식의 최소전단보강근비 값은 최대 2배 이상의 차이가 있다. 또한, 최소전단보강근비에 영향을 주는 요소가 각 기준식마다 다르며, 이에 대한 연구도 그 중요성에 비하여 극히 적은 실정이다. 이연구에서는 트러스 모델에 근거한 이론적인 방법에 의하여 철근콘크리트 부재의 최소전단보강근비를 예측하였다. 제안식에는 최소전단철근비에 영향을 주는 콘크리트의 압축강도, 전단보강근의 항복응력, 주근비, 전단경간비의 영향이 고려되었다. 제안식에 의하여 계산된 최소전단철근비는 콘크리트 압축강도에 따라 변화하며, ACI 318-02 및 캐나다 규준과 비슷한 분포를 나타냈다. KCI-99 및 ACI 318-02의 최소전단철근비는 주인장철근비에 관계없이 일정하지만 제안식에 의한 최소전단철근비는 주인장철근비가 증가할수록 줄어드는 양상을 보였다. 또한, 전단경간비에 따른 최소전단철근비에 대하여 KCI-99 및 ACI-318-02에 의한 최소전단철근비는 전단경간비에 관계없이 일정한 값을 보였지만 제안식에 의한 최소전단철근비는 전단경간비가 증가할수록 증가하는 양상을 보였다.변화로 인한 resetup의 번거러움을 줄일 수 있었고 환자에게 인위적으로 치료 자세를 유지해야하는 불편함을 해소할 수 있었다. 궁극적으로는 set-up의 재현성을 유지해 보다 정확한 치료를 가능하게 했고 앞으로 이 고정용구를 보완, 개선시켜서 환자의 치료에 활용한다면 더욱더 질적으로 향상된 치료를 제공 할 수 있을 것으로 사료된다.하였다. IV. 결론 Forward IMRT는 2차원적인 치료법에 비하여 PTV에는 균일한 선량분포를 이루면서 정상조직에는 tolerance dose 이하로 선량을 전달 할 수 있는 치료기법이었다. 계속적으로 평가할 필요가 있을 것이다.> 최대 $11.65\%$까지 골조직에 의한 선량감소가 나타나는 것을 알 수가 있다. 또한, Diode detector로 측정한 심부선량 값은 두부, 경부, 대퇴부, 슬관절, 족관절에서 각각 $95.23{\pm}1.18,\;98.33{\pm}0.6,\;93.5{\pm}1.5,\;87.3{\pm}1.5,\;86.90{\pm}1.16$으로 나타났으며, TLD로 측정한 대퇴부, 슬관절, 족관절에서의 표면선량과 비교했을 때 부위에 따라 최소 $4.53\%{\sim}$ 최대 $12.6\%$ 까지 차이를 보였다. 그리고 골조직에 의한 선량감쇄의 영향이 적은 복부(배꼽)에서는 열형광선량계 및 다이로드측정기로 측정한 값이 각각 $101.58{\pm}0.95,\;104.77{\pm}1.18$로 큰 차이가 없었다. IV 결론 전신방사선조사시 표면선량을

Keywords

References

  1. Johnson, M. K. and Ramirez, J. A., 'Minimum Shear Reinforcement in Beams with High Strength Concrete,' ACI Structural Journal, Vol.86, No.4, July-Aug. 1989, pp.376-382
  2. Krauthammer, T., 'Minimum Shear Reinforcement Based on Interfere Shear Transfer,' ACI Structural Journal, Vol.89, No.1, Jan.-Feb. 1992, pp.99-382
  3. ACI Committee 318-89, 'Building Code Requirements for Reinforced Concrete and Commentary (ACT 318-89/ ACI 318R-89),' American Concrete Institute, Detroit, 1989, 389pp
  4. ACI Committee 318-02, 'Building Code Requirements for Reinforced Concrete and Commentary (ACT 318-02/ACI 318R-02),' American Concrete Institute, Detroit, 2002, 443pp
  5. CSA Committee A23.3, 'Design of Concrete Structures for Buildings,' CAV3-A23.3-M94, Canadian Standards Association, Canada, 1994, 199pp
  6. CEB-FIP, 'CEB-FIP Model Code 1990,' Committee Euro-International du Beton, London, 1991, 437pp
  7. Architectural Institute of Japan, 'Standard for Structural Calculation of Reinforced Concrete Structures,' Architectural Institute of Japan, Japan, 1991, 654pp
  8. 한국콘크리트학회, 대한건축학회, '콘크리트 구조설계 규준,' 한국콘크리트학회, 대한건축학회, 1999, 319pp
  9. Yoon, Y. S., Cook, W. D, and Mitchell, D, 'Minimum Shear Reinforcement in Nominal, Medium, and High-Strength Concrete Beams,' ACI Structural Journal, Vol.93, No.5, Sep.-Oct. 1996, pp.576-584
  10. Ozcebe, G., Ersoy, U., and Tankut, T, 'Evaluation of Minimum Shear Reinforcements for High Strength Concrete,' ACI Structural Journal, Vol.96, No.3, May-Jun. 1999, pp.361-368
  11. Roller, J. J. and Russell, H G., 'Shear Strength of High-Strength Concrete Beams with Web Reinforcement,' ACI Structural Journal, Vol.87, No.2, Mar.-Apr. 1990, pp.191-198
  12. Vecchio, F. J. and Collins, M. P., 'The Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear,' ACI Structural Journal, Vol.83, No.2. Mar.-Apr. 1989, pp.219-231
  13. Hsu, T. T. C., 'Softened Truss Model Theory for Shear and Torsion,' ACI Structural Journal, Vol.85, No.6, Nov.-Dec. 1988, pp.624-635
  14. Belarbi, A and Hsu, T.T.C., 'Constitutive Laws of Concrete in Tension and Reinforcing Bars Stiffened by Concrete,' ACI Structural Journal, Vol.91, No.4, Jul.-Aug. 1994, pp.465-474
  15. MacGregor, J.G., 'Reiriforced Concrete Meclunics and Design,' Prentice Hall, NewJersey, 1997, 939pp
  16. Zsutty, T. C., 'Shear Strength Prediction for SeparateCategoris of Simple Beam Tests,' ACI Structural Journal, Vol.68, No.2, Feb. 1971, pp.138-143
  17. Watanabe, F and Lee, J.-Y., 'Theoretical Prediction of Shear Strength and Failure Mode of Reinforced Concrete Beams,' ACI Structural Journal, Vol.95, No.6, Nov.-Dec., 1998, pp.749-757
  18. Vecchio, F. J. and Collins, M. P. 'Predicting the Response of Reinforced Concrete Beams Subjected to Shear Using Modified Compression-Field Theory,' ACI Structural Journal, Vol.85, No.3, May-Jun., 1988, pp.258-268