Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Flexure-Shear Behavior of Circular Bridge Columns under Cyclic Lateral Loads

반복 횡하중을 받는 원형교각의 휨-전단 거동

  • Lee Jae-Hoon (Dept. of Civil Engineering, Yeungnam University) ;
  • Ko Seong-Hyun (Dept. of Civil Engineering, Yeungnam University) ;
  • Lee Dae-Hyoung (Dept. of Civil & Environmrntal Engineering, Gyeongdo Provincial College) ;
  • Chung Young-Soo (Dept. of Civil Engineering, Chungang University)
  • Published : 2004.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this research is to investigate the flexure-shear behavior of bridge columns under seismic loads. Four full scale circular reinforced concrete columns were tested under cyclic lateral load with constant axial load. The selected test variables are aspect ratio(1.825, 2.5, 4.0), transverse steel configuration, and longitudinal steel ratio. Volumetric ratio of transverse hoop of all the columns is 0.0023 in the plastic hinge region. It corresponds to $24\%$ of the minimum requirement of confining steel by Korean Bridge Design Specifications, which represent existing columns not designed by the current seismic design specifications or designed by limited ductility concept. The columns showed flexural failure or flexure-shear failure depending on the test variables. Failure behavior and seismic performance are investigated and discussed in this paper.

본 연구는 지진하중을 받는 교각의 휨-전단 거동 파악을 목적으로 한다. 실물크기 원형기둥 실험체 4개를 제작하여 일정한 축력 하에서 반복횡하중을 가력하는 실험을 수행하였다. 실험체의 주요변수는 형상비(1.825, 2.5, 4.0), 횡방향철근 형상, 축방향 철근비이다. 모든 실험체의 횡방향 후프띠철근 체적비는 소성힌지 구간에서 0.0023의 값을 갖는다. 이 값은 도로교설계기준에서 요구하는 최소 심부구속철근 요구량의 $24\%$에 해당하며, 이는 내진설계가 되지 않은 기존 교각이나 한정연성설계개념으로 설계되는 교각을 나타낸다. 실험체는 실험변수에 따라 휨파괴나 휨-전단 파괴거동을 보였다. 본 논문에서는 실험결과에 따른 파괴거동과 내진성능을 분석하였다.

Keywords

References

  1. 김병석, 김영진, 곽임종, 조창백, 조정래, '휨-전단 복합 거동을 보이는 RC 원형교각의 내진성능 평가,' 한국지진공학회 논문집, 한국지진공학회, Vol.5, No.3, 2001, pp.29-36
  2. 이재훈, 김민구, 손혁수, 'Flexure-Shear Performance of Circular RC Bridge Columns under Cyclic Loading,' KEERC Annual Report, 2001, pp.101-114
  3. 정영수, 박창규, 이은희, '지진을 경험한 형상비 2.5 RC 교각의 내진 변위 연성도 평가, ' 한국지진공학회 논문집, 한국지진공학회, Vol.7, No.3, 2003,pp.79-88
  4. Ghee, A. B., Priestley, M. J. N., and Paulay, T., 'Seismic shear strength of Circular Reinforced Concrete Columns,' ACI Structural Journal, Vol.86, No.1, 1989, pp.45-59
  5. Priestley, M. J. N., Seible, F., Xiao, Y., and Venna, R, 'Steel Jacket Retrofotting of Reinforced Concrete Colurrms for Enhanced shear strength - Part 2; Test Results and Comparison with Theory,' ACI Structural Journal, Vol.91, No.5, 1994, pp.537-551
  6. Jaradat, O. A, Mclean, D. I., Marsh, M. L., 'Performance of Existing Bridge Columns under Cyclic Loading-Part 1: Experimental Results and Observed Behavior,' ACI Structural Journal, Vol.95, No.6, 1998, pp.695-704
  7. Mander, J. B., Waheed, S. M, Chaudhary, M. T. A, and Chen, S. S., 'Seismic performance of shear critical reinforced concrete bridge piers,' Technical Report NCEER 93-0010, National Center for Earthquake Engineering Research, Buffalo, 1993, R-3p.
  8. Y. D. Hose and F. Seible, 'Performance Evaluation Database for Concrete Bridge Components and Systems under Simulated Seismic Loads,' PEER Report 1999/11, Pacific Earthquake Engineering Research Center, November, 1999, 111pp