An Experimental Study of Smoke Movement in Tunnel Fires with a Vertical Shaft

수직갱이 설치된 터널내 화재시 연기거동에 관한 실험적 연구

  • 이성룡 (중앙대학교 기계공학부 대학원) ;
  • 유홍선 (중앙대학교 기계공학부) ;
  • 김충익 (중앙대학교 기계공학부)
  • Published : 2004.02.01

Abstract

The present paper concerns a smoke movement in a tunnel fire with a vertical shaft. The model tunnel measured 13.4m long, 0.4m wide and 0.4m high. The cross section is 1: 20 of a full scale tunnel. Ethanol was used as a fuel. The fire size in model tests varied from 1.35 kW to 13.37 kW, which corresponds to full scale fires of 2.41 to 23.91 MW. Smoke front velocity and temperatrue were decreased due to the vertical shaft install. Temperature was reduced maximum about 2$0^{\circ}C$ at ceiling and about 23$^{\circ}C$ at vertical position. CO concentration was reduced as the vent width widened. When vent width was more than 15 cm, CO concentration was not reached 100 ppm. Descent degree of the smoke layer was confirmed through the visualization.

Keywords

References

  1. Ribot, B., Chasse, P. and Gay, B., 1999, Numerical simulations of smoke extraction by roof vents in a tunnel: Comparion with experimental tests analysis of physical phe-nomena, Porceeding of the First Interna-tional Conference on Tunnel Fires and One Day Seminar on Excape from Tunnels, pp. 169-179
  2. Proceeding of the First Intermational Conference on Tunnel Fiers and One Day Seminar on Excape from Tunnels Numerical simulations of smoke extraction by roof vents in a tunnel: Comparion with experimental tests analysis of physical phenomena Ribot,B.;Chasse,P.;Gay,B.
  3. Proceeding of the First Intermational Conference on Tunnel Fiers and One Day Seminar on Excape from Tunnels Effects of ventilation on smoke spread in tunnels Ingason,H.;Hagglund,B.;Werling,P.
  4. Proceeding of the First Intermational Conference on Tunnel Fiers and One Day Seminar on Excape from Tunnels Experimental study of exhaust trap efficiency Vauquelin,O.;Megret,O.
  5. Fire Safety Journal v.15 no.1 Scaling applications in fire research Quintiere,J.G.